Productcode: PEX1394B3
Deze 3-poort PCI Express FireWire Adapterkaart kan worden geïnstalleerd in een PCI Express-slot en voegt twee IEEE1394b-poorten (9-pins FireWire 800) en één IEEE1394a-poort (6-pins FireWire 400) toe, dat zorgt voor een hoge compatibiliteit met een breed scala van FireWire-apparaten (zoals DV-camcorders, externe harde schijven, digitale camera's, etc.).
De adapterkaart met 2b en 1a bevat een native (enkele chip) PCI Express-chipset, dat resulteert in snellere, meer betrouwbare en kosteneffectieve prestaties dan uitbreidingskaarten die gebruik maken van een "bridge"-chip.
Warranty Information | Warranty | Lifetime |
---|---|---|
Connector(en) | 1 - Type connector(en) | PCI Express x1 |
1 - Interne poorten | LP4 (4-polig; Molex-type Large Drive Power) | |
2 - Externe poorten | Firewire 800 (9-polig, IEEE 1394b) | |
1 - Externe poorten | Firewire 400 (6-polig, IEEE 1394a) | |
Fysieke eigenschappen | Gewicht product | 48 g [1,7 oz] |
Type behuizing | Staal | |
Lengte product | 85 mm [3,3 in] | |
Breedte product | 18 mm [0,7 in] | |
Hoogte product | 12 cm [4,7 in] | |
Gebruiksomgeving | Bedrijfstemperatuur | 0°C to 70°C (32°F to 158°F) |
Opslagtemperatuur | -20°C to 90°C (-4°F to 194°F) | |
Vochtigheid | 0% - 90% rel. luchtvochtigheid | |
Hardware | Poorten | 3 |
Interface | FireWire 800 (1394b) | |
Bus type | PCI Express | |
Kaarttype | Standaard bracket (incl. low profile bracket) | |
Interface | FireWire 400 (1394a) | |
Industriestandaarden | IEEE-1394/1394A/1394B OHCI PCI Express 1.1 |
|
Chipsetcode | Texas Instruments - XIO2213B | |
Prestaties | Maximale overdrachtsnelheid | 800 Mbps 400 Mbps |
MTBF | 149,905 hours | |
Software | Besturingssystemen | Windows® 2000, XP, Vista, 7, 8, 8.1, 10 Windows Server® 2003, 2008 R2, 2012, 2016, 2019 Mac OS® 10.6 tot 10.15 Linux 3.5.x tot 4.4.x Alleen LTS-versies |
Speciale opmerkingen / vereisten | Systeem- en kabelvereisten | PCI Express-computer met een beschikbare PCI Express x1-sleuf of hoger |
Notitie | Met de meegeleverde software kunnen drivers alleen "standaard" worden geïnstalleerd. Om de instelling van de drivers te kunnen aanpassen dient u software van een ander bedrijf aan te schaffen. | |
Verpakkingsinformatie | Package Height | 41 mm [1,6 in] |
Package Length | 21,3 cm [8,4 in] | |
Verzendgewicht (verpakt) | 212 g [7,5 oz] | |
Package Width | 14,8 cm [5,8 in] | |
Wat wordt er meegeleverd | 1 - Meegeleverd | PCI Express FireWire-kaart |
FireWire-kabel | ||
Low-profile bracket | ||
Software-CD | ||
Handleiding |
Zorg voor hoge overdrachtsnelheden tussen uw FireWire-apparaten
Zorg voor hoge overdrachtsnelheden tussen uw FireWire-apparaten
Zorg voor hoge overdrachtsnelheden tussen uw FireWire-apparaten
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)This card is natively supported in all operating systems listed on the product page, under the Technical Specifications tab. This means that the card should install automatically after physically connecting it.
If there are any issues with the functionality of the card after installation in Windows, refer to the following FAQ: https://www.startech.com/faq/firewire-cards-windows-legacy-driver-swap.
When you troubleshoot issues with a FireWire controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
When you test the FireWire device and controller card, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your devices are listed under IEEE 1394 controllers.
If you do not see the FireWire controller card listed in Device Manager, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows.
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
To confirm that the Mac OS detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.