Productcode: PEX2S553
De PEX2S553 PCI Express seriële adapterkaart zet een PCI Express-slot om naar twee RS232 (DB9) seriële poorten. Deze 2-poort seriële adapterkaart is voorzien van een native ontwerp met enkele chip (geen bridge-chip), waarmee u de volledige capaciteit van PCI Express (PCI-E) benut en de belasting op de CPU met maar liefst 48% wordt verminderd ten opzichte van conventionele seriële kaarten.
De RS232 seriële adapterkaart (PEX2S553) is compatibel met een breed spectrum van besturingssystemen inclusief Windows® 2000/XP/2003/Vista™/Windows 7/Server 2008 R2 (32 en 64 bit), Linux Kernel 2.6.11 tot 4.11x, en MAC OS X 10.4 en hoger.
Dit product geldt als vervanging voor onze PEX2S552-kaart.
Met levenslange garantie en gratis technische ondersteuning door StarTech.com.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(en) | 1 - Type connector(en) | PCI Express x1 |
1 - Interne poorten | LP4 (4-polig; Molex-type Large Drive Power) | |
2 - Externe poorten | DB-9 (9-polig, D-Sub) | |
Fysieke eigenschappen | Gewicht product | 61 g [2.2 oz] |
Kleur | Groen | |
Type behuizing | Staal | |
Lengte product | 10.5 cm [4.1 in] | |
Breedte product | 12 cm [4.7 in] | |
Hoogte product | 20 mm [0.8 in] | |
Gebruiksomgeving | Bedrijfstemperatuur | -10°C to 80°C (14°F to 176°F) |
Opslagtemperatuur | -20°C to 100°C (-4°F to 212°F) | |
Vochtigheid | 5% - 85% rel. luchtvochtigheid | |
Hardware | Poorten | 2 |
Interface | Serieel | |
Bus type | PCI Express | |
Kaarttype | Standaard bracket (incl. low profile bracket) | |
Poorttype | Geïntegreerd op kaart | |
Chipsetcode | ASIX - MCS9922CV-AA | |
Prestaties | Seriële protocol | RS-232 |
Max. baudrate | 460,8 kbit/s | |
FIFO | 128 Bytes | |
Software | Besturingssystemen | Windows® DOS, 95, 98SE, 2000, CE 5.0/6.0, Embedded System 2009, POS Ready 2009, XP Embedded, XP, Vista, 7, 8, 8.1, 10 Windows Server® 2003, 2008 R2, 2012, 2012 R2, 2016, 2019 Mac OS X® 10.4 tot 10.10 Linux kernel 2.6.x tot 4.11.x alleen LTS-versies |
Speciale opmerkingen / vereisten | Notitie | Selecteerbare voedingsuitgang op pin-9 van de seriële poort |
Verpakkingsinformatie | Package Height | 32 mm [1.3 in] |
Package Length | 17.5 cm [6.9 in] | |
Verzendgewicht (verpakt) | 151 g [5.3 oz] | |
Package Width | 14.5 cm [5.7 in] | |
Wat wordt er meegeleverd | 1 - Meegeleverd | 2-poort PCI Express Seriële Kaart |
2 - Meegeleverd | Low-profile brackets | |
1 - Meegeleverd | Driver-CD | |
Handleiding |
Verander een DB9 mannelijke poort in een DB25 mannelijke poort
Verandert een DB9 mannelijke poort in een DB25 vrouwelijke poort
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Extract the files using the instructions in Step 2.
Prior to installing this device, ensure that your operating system is up to date (for example, you have installed the most recent service pack).
To install the driver:
Note: Windows will typically save the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).
Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).
Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: The Select your device’s type from the list below screen does not appear on all systems. If you do not see this screen, skip this step.
Note: To view your system type, press Windows key + R, type control /name microsoft.system, and press Enter.
Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).
Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Documents and Settings\your_name\My Documents\Downloads).
Note: The Hardware Type screen does not appear on all systems. If you do not see this screen, skip this step.
Note: To view your system type, press Windows key + R, type control /name microsoft.system, and press Enter.
When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Serial cables
Serial ports
Serial devices
To test your setup components, try the following:
Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.
Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial ports and serial device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
If you do not see the COM port number in Device Manager see this FAQ for PCI/PCIe expansion cards: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows
or this FAQ for USB devices: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
To confirm that the Mac OS detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
Serial cards derive power from the PCI or PCI Express slot on the motherboard. When you power serial devices from the serial card ports, the power provided by the slot may not be enough to power all of the devices and you should connect additional sources of power from the power supply. When you troubleshoot issues, you should connect an additional source of power.
Some signs that you are experiencing power-related issues include certain devices not working correctly, not all of the devices working at the same time, and certain devices not working at all.