Productcode: PEX2S553S
Met de PE2S553S 2-poorts PCI Express seriële kaart kunt u twee tegen ESD beveiligde RS232 poorten toevoegen, met een 5 V of 12 V selecteerbare voedingsuitgang via een PCI Express-sleuf.
Deze 2-poorts seriële kaart is ideaal voor industriële omgevingen en biedt een geïntegreerde 15 kV ESD-beveiliging, waardoor beschadiging van de aangesloten apparaten bij netstootspanningen en elektrostatische ontlading wordt voorkomen. Een uitgebreid bedrijfstemperatuurbereik (-30 °C tot 75& deg;C) zorgt ervoor dat de prestatie ook in ruwe omstandigheden is gegarandeerd.
Voor apparaten die extra vermogen vereisen, heeft deze seriële controller een optionele, met een jumper te selecteren 5 V- of 12 V-voedingsuitgang (pin 1 en/of pin 9), via een LP4-verbinding met uw voeding. Voor extra flexibiliteit kan de voeding op elke poort worden in- of uitgeschakeld, zodat u kunt kiezen welke poort als voeding wordt gebruikt.
Deze veelzijdige RS232-kaart ondersteunt high-speed seriële datatransmissiesnelheden tot 921,6 Kbps, en voldoet aan de PCIe Gen 2.0-specificaties voor extra bandbreedte. Om de installatieopties te maximaliseren, is de 2-poorts kaart uitgerust met een standard-profile steun, terwijl een optionele low-profile-/halfhoge steun wordt meegeleverd voor de installatie in kleine-vormfactorcomputers.
Gedekt door een StarTech.com levenslange garantie en gratis levenslange technische ondersteuning.
Warranty Information | Warranty | Lifetime |
---|---|---|
Connector(en) | 1 - Type connector(en) | PCI Express x1 |
2 - Externe poorten | DB-9 (9-polig, D-Sub) | |
Fysieke eigenschappen | Lengte product | 12,1 cm [4,8 in] |
Breedte product | 18 mm [0,7 in] | |
Hoogte product | 98 mm [3,9 in] | |
Gewicht product | 59 g [2,1 oz] | |
Gebruiksomgeving | Bedrijfstemperatuur | -30°C to 75°C (-22°F to 167°F) |
Opslagtemperatuur | -40°C to 85°C (-40°F to 185°F) | |
Vochtigheid | 5% - 95% rel. vochtigheid (niet-condenserend) | |
Hardware | Poorten | 2 |
Interface | Serieel | |
Bus type | PCI Express | |
Kaarttype | Standaard bracket (incl. low profile bracket) | |
Poorttype | Geïntegreerd op kaart | |
Industriestandaarden | PCI Express Base Specification 2.0 | |
Chipsetcode | Exar - XR17V352 | |
Prestaties | Seriële protocol | RS-232 |
Max. baudrate | 921,6 kbit/s | |
Databits | 5, 6, 7, 8 | |
FIFO | 256 Bytes | |
Flow-control | Geen, Xon/Xoff, RTS/CTS, DTR/DSR | |
Pariteit | Even, Odd, Mark, Space, None | |
Stopbits | 1, 1.5, 2 | |
Overspanningsbeveiliging | 15 KV ESD | |
Software | Besturingssystemen | Windows® 2000, XP, Vista, 7, 8, 8.1, 10 Windows Server® 2003, 2008 R2, 2012 Linux 2.6.x to 4.4.x LTS Versions only |
Speciale opmerkingen / vereisten | Systeem- en kabelvereisten | Vrije PCI Express-slot |
Beschikbare LP4-voedingsconnector (indien extra vermogen vereist is voor de aangesloten apparaten) | ||
Verpakkingsinformatie | Package Height | 30 mm [1,2 in] |
Package Length | 14,2 cm [5,6 in] | |
Package Width | 17 cm [6,7 in] | |
Verzendgewicht (verpakt) | 171 g [6,0 oz] | |
Wat wordt er meegeleverd | 1 - Meegeleverd | PCI Express Seriële Kaart |
2 - Meegeleverd | Low-profile brackets | |
1 - Meegeleverd | Driver-CD | |
Handleiding |
Voeg een DB9 seriële poort toe aan het achterpaneel van een computer
Maak van een seriële IDC-moederbordaansluiting een 10-pins seriële RS232-connector voor paneelmontage
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)When you troubleshoot issues with a serial device, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Serial cables
Serial ports
Serial devices
To test your setup components, try the following:
Use the serial cable, serial port, and serial device in another setup to see if the problem is with the components or the setup.
Use a different serial cable, serial port, and serial device in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the serial ports and serial device, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Ports (COM & LPT).
Make sure that the COM port number is the correct number for the serial device and that the software being used to connect the computer to the serial device uses the correct COM port number.
If you do not see the COM port number in Device Manager see this FAQ for PCI/PCIe expansion cards: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows
or this FAQ for USB devices: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#usb-cannot-detect-windows
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
Note: Some serial devices work only if the COM port number is between a certain range. For example, COM1 to COM4.
Perform a serial loopback test. See this FAQ on how to perform a RS-232 serial loopback test: http://www.startech.com/faq/serial_loopback_test_rs232_windows
To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following:
Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal.
If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.
You can check multiple ports at the same time by opening multiple sessions, putting the loopback adapter on one port, and trying to type into each session. When you can see what you are typing, you know that the COM port is working and you can see which port number the physical serial port is. Close the window for the port that you just tested to speed up the testing of the remaining serial ports.
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.