Productcode: PEXUSB312A2
Met deze USB 3.1 kaart kunt u twee USB Type-A poorten aan uw computer toevoegen, via een PCI Express-sleuf. Zo kunt u uw huidige systeem upgraden door toevoeging van twee USB 3.1 Gen 2 poorten aan uw computer en toegang tot dataoverdrachtsnelheden tot 10 Gbps.
Door 10 Gbps USB-poorten aan uw computer toe te voegen, kunt u profiteren van de snelheid van USB 3.1 Gen 2 en ervan verzekerd zijn dat u klaar bent voor zowel huidige als toekomstige USB-A apparaten met hoge bandbreedte.
Omdat een hogere data-throughput wordt ondersteund, is deze PCI Express USB 3.1 kaart een must voor externe harde schijven, harde-schijfbehuizingen, en vele andere USB 3.1 randapparaten. Bovendien is de USB-kaart uitgerust met een optionele SATA voedingsconnector die op uw systeemvoeding kan worden aangesloten en 900 mA per poort biedt voor USB 3.1 apparaten met busvoeding (500 mA voor USB 2.0). De kaart is bij uitstek geschikt voor grote externe opslagoplossingen.
De aansluiting van oudere randapparaten is geen probleem. Deze veelzijdige 2-poorts USB 3.1 kaart is neerwaarts compatibel met oudere USB 3.0/2.0 apparaten die de gebruikelijke USB Type-A poort gebruiken, zodat u de extra onkosten en het ongemak kunt besparen omdat u geen nieuwe apparaten hoeft aan te schaffen.
De USB 3.1 PCIe-kaart is compatibel met een breed scala aan Windows® en Linux® besturingssystemen. Bovendien worden bij deze hoogwaardige kaart zowel standard-profile als low-profile steunen geleverd, waardoor deze kaart eenvoudig in full of kleine-vormfactor pc's of servers kan worden geïnstalleerd.
De PEXUSB312A2 wordt gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(en) | 1 - Type connector(en) | PCI Express x4 |
1 - Interne poorten | SATA voeding (15-polig) | |
2 - Externe poorten | USB 3.1 USB Type-A (9-polig, Gen 2, 10 Gbps) | |
Fysieke eigenschappen | Lengte product | 95,0 mm [3,7 in] |
Breedte product | 12,0 mm [0,5 in] | |
Hoogte product | 70,0 mm [2,8 in] | |
Gewicht product | 50,0 g [1,8 oz] | |
Gebruiksomgeving | Bedrijfstemperatuur | 5°C to 50°C (41°F to 122°F) |
Opslagtemperatuur | -20°C to 60°C (-4°F to 140°F) | |
Vochtigheid | 20% - 80% rel. luchtvochtigheid | |
Hardware | Poorten | 2 |
Interface | USB 3.1 Gen 2 | |
Bus type | PCI Express | |
Kaarttype | Standaard bracket (incl. low profile bracket) | |
Poorttype | Geïntegreerd op kaart | |
Industriestandaarden | USB 3.1 specificatie rev. 1.0 USB specificatie rev. 2.0 PCI Express basisspecificatie rev. 3.0 Intel xHCI specificatie rev. 1.1 UASP (USB Attached SCSI Protocol) Rev. 1.0 |
|
Chipsetcode | ASMedia - ASM2142 | |
Prestaties | Maximale overdrachtsnelheid | 10 Gbit/s |
Type en snelheid | USB 3.1 Gen 2 - 10 Gbit/s | |
UASP ondersteuning | Ja | |
Software | Besturingssystemen | Windows® 7, 8, 8.1, 10 Windows Server® 2008 R2, 2012, 2012 R2, 2016, 2019 Linux® 3.5 tot 4.11.x alleen LTS-versie |
Speciale opmerkingen / vereisten | Systeem- en kabelvereisten | Voor PCI Express geschikte computer of server met een PCI Express x4 sleuf of hoger (x8, x16) |
Optionele SATA-voedingsconnector | ||
Notitie | De maximale throughput van deze kaart is beperkt door de businterface. De max. throughput van PCI Express Gen 1.0 is 2,5 Gbps. De max. throughput van PCI Express Gen 2.0 is 5 Gbps. De max. throughput van PCI Express Gen 3.0 is 10 Gbps. | |
Verpakkingsinformatie | Verzendgewicht (verpakt) | 124,0 g [4,4 oz] |
Package Length | 17,2 cm [6,8 in] | |
Package Width | 14,2 cm [5,6 in] | |
Package Height | 30,0 mm [1,2 in] | |
Wat wordt er meegeleverd | 1 - Meegeleverd | USB 3.1 kaart |
Low-profile-bracket | ||
verkorte handleiding |
USB-A naar USB-C™ kabel | USB-IF gecertificeerd | USB 3.1 (10 Gbps)
Voed een SATA harde schijf via een conventionele LP4- voedingsaansluiting
Sluit uw externe apparaten aan en zet gegevens over 10x sneller dan met USB 2.0
Benut de hogere snelheid van USB 3.1 Gen 2 in een lichte en draagbare opslagoplossing
De high-speed, high-capacity opslagoplossing waarop u hebt zitten wachten – met USB 3.1 Gen 2
Bereid u voor op ultrasnelle USB 3.1 Gen 2 dataopslag met uw 2,5 inch SSD of HDD
Plaats uw USB 3.0 Micro-apparaten gemakkelijk bij uw desktop of laptop met een dunne, flexibelere kabel
Voeg 7 externe USB 3.0-poorten toe aan computer met één USB-aansluiting
Sluit 7 high-performance apparaten aan op uw computer of Mac met deze compacte en robuuste hub
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Before you install the device, make sure that your operating system is current (for example, the most recent service pack is installed).
Note: Windows usually saves the files to the Downloads folder that is associated with your user account (for example, C:\Users\your_name\Downloads).
Note: If the Run as Administrator option is not available, you might be attempting to run the installer from within the zipped file. Complete the instructions in step 2 to extract the files.
Your device should be ready to use.
If the USB device does not work after your computer has been in extended hibernation, it is likely that Windows has automatically turned off the USB Root hub to save power.
The steps below outline how to configure the USB root hub to stay on during hibernation, to prevent this from happening.
Windows 10 / 8
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows 7 / Vista
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
Windows XP
Note: You may need to disconnect and re-connect your USB device after applying these settings to re-establish the connection.
When you troubleshoot issues with a USB controller card, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
USB cables
USB devices
USB controller card
To test your setup components, try the following:
Use the USB cable, device, and controller card in another setup to see if the problem is with the components or the setup.
Use a different USB cable, device, and controller card in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the USB device and controller card, it is recommended that you do the following:
Press the Windows key + R, type devmgmt.msc, and press Enter to open Device Manager. Check to see if your device is listed under Universal Serial Bus controllers.
If you do not see the USB controller card listed in Device Manager please see this FAQ: https://www.startech.com/support/faqs/technical-support?topic=expansion-cards#pci-pcie-cannot-boot-os-or-detect-windows.
If the device is listed with an error, follow the instructions on the website to reinstall the drivers.
If your setup components support USB 3.1 but you are experiencing slower transfer speeds than you expected, consider the following:
To confirm the functionality of your USB host connection, its ports, and any other devices in your setup, refer to the information provided by the manufacturer.
Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.
To confirm that Windows detects your expansion card, complete the following:
Your expansion card is listed according to the name of the chipset. To determine the name of the chipset of your expansion card, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.
USB 3.1 is the most recent version of the USB (Universal Serial Bus) standard for connecting computers and electronic devices. It is capable of data transfer speeds up to 10Gbps, and while it can use the USB-C connector type, it can also use a variety of other connector types. To achieve USB 3.1 transfer speeds, your USB host connection, cables, and device must all support USB 3.1. USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps).
USB 3.0 is capable of data transfer speeds up to 5Gbps. USB 3.0 is also known as USB 3.1 Gen 1 (5Gbps).
USB 3.1 is backwards compatible with USB 3.0 and USB 2.0, except in the following scenarios:
To transfer data at speeds of 10Gbps, you need to confirm that the following components in your setup support USB 3.1:
Note: USB 3.1 is also known as USB 3.1 Gen 2 (10Gbps). Devices that support USB 3.1 should have the USB 3.1 symbol on them. If the USB 3.1 symbol does not appear on your USB source or device, refer to the information provided by the manufacturer to confirm whether the USB source or device support USB 3.1.