30 cm lange DVI-I analoog naar 2x VGA videosplitterkabel - M/F

Geef een DVI-I-signaal tegelijkertijd weer op twee VGA-monitors

Productcode: DVISPL1VV

  • 1 DVI-I mannelijke connector
  • 2 VGA HD15 vrouwelijke connectors
  • 30 cm lange kabel
Uw prijs
€20,99 EUR excl. VAT
€25,40 EUR incl. VAT

Met de DVISPL1VV 30 cm DVI naar Dual VGA-kabel kunt u twee VGA-monitoren/schermen of projectoren op één DVI-I analoge video-uitgangspoort van uw computer aansluiten.

De DVISPL1VV wordt gedekt door de levenslange garantie van StarTech.com en is een betrouwbare en voordelige oplossing voor het splitsen van één DVI-I videosignaal tussen twee monitoren om uw videokaart optimaal te benutten.

Toepassingen

  • Zendt tegelijkertijd één DVI analoog signaal naar twee VGA-schermen
  • Bij uitstek geschikt voor bestuurskamers en klaslokalen waar een monitor of projector als scherm wordt gebruikt

Het voordeel van StarTech.com

  • Garandeert een consistent hoogwaardige verbinding
  • Zorgt voor trekontlasting van de DVI- en VGA-connectors en vermindert de mogelijke blokkering van andere beschikbare poorten
  • Gegarandeerde betrouwbaarheid

Partnernummers

  • Ingram Micro Belgium 1849485
  • D&D Distribution DVISPL1VV
  • Tech Data - Belgium 4428256
  • UPC 065030840651

Specificaties

Warranty Information Warranty Lifetime
Connector(en) 1 - Connector A DVI-I (23-polig)
2 - Connector B VGA (15-polig, D-Sub met hoge dichtheid)
Fysieke eigenschappen Gewicht product 150 g [5,3 oz]
Kleur Zwart
Draaddikte 28 AWG
Kabellengte 30,5 cm [12,0 in]
Lengte product 30,5 cm [12,0 in]
Hardware Aantal geleiders 15
Connectormateriaal Goud
Type kabelmantel PVC - Polyvinyl Chloride
Brandbestendigheid CMG goedgekeurd (algemeen doel)
Prestaties Maximale digitale resoluties 1920 × 1200 @ 60Hz
Speciale opmerkingen / vereisten Notitie Dit product splitst uw videosignaal naar twee identieke beelden in dezelfde resolutie. Het kan niet worden gebruikt om een beeld over twee schermen te verdelen, of om op elk scherm een ander beeld weer te geven.
Verpakkingsinformatie Package Height 40 mm [1,6 in]
Package Length 21,5 cm [8,5 in]
Verzendgewicht (verpakt) 156 g [5,5 oz]
Package Width 11,5 cm [4,5 in]
Wat wordt er meegeleverd 1 - Meegeleverd 30 cm lange DVI-I analoog naar 2x VGA videosplitterkabel - M/F

Accessoires

MXT101MMHQ3

3 ft Coax High Resolution Monitor VGA Cable - HD15 M/M

Connect your VGA monitor with the highest quality connection available

Uw prijs
€6,99 EUR excl. VAT
€8,46 EUR incl. VAT
MXT101MMHQ25

7,6 m Coaxiale hoge resolutie VGA monitor kabel - HD15 M/M

Connect your VGA monitor with the highest quality connection available

Uw prijs
€21,99 EUR excl. VAT
€26,61 EUR incl. VAT
MXT101MMHQ10

10 ft Coax High Resolution VGA Monitor Cable HD15 M/M

Connect your VGA monitor with the highest quality connection available

Uw prijs
€12,99 EUR excl. VAT
€15,72 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video splitter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI splitter, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video splitter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video splitter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video splitter from your setup and test to make sure that the video source and video destination work together without the video splitter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, splitter, and destination all need to support the resolution that you are using.

Video splitters take the output for monitor port 1 and mirror it to the remaining outputs. By default, the first output port is the master port that is mirrored to each additional monitor. Make sure that you use the first output port when you use the video splitter. The master port is labeled on the splitter boxes from StarTech.com. On the splitter cables from StarTech.com, the master port is the top port.

If you are having issues with a splitter interpreting the incorrect port as the master port, try the following:

  1. Unplug all of the video connections.

  2. If the splitter is powered, power cycle the splitter.

  3. Plug in all of the video connections again.

  4. Make sure that the first video connection plugged in is the one that you want to be the master port.

You might encounter resolution issues when you use a video splitter. This can occur because the information and resolution on one display are being copied and sent to each of the additional displays. You should make sure that all of the displays that you are using can support the output resolution. For more information, refer to the following FAQ: https://www.startech.com/faq/video_splitters_correct_port_usage

Voor uw aanschaf

Digital Visual Interface (DVI) is a video display interface that can contain different types of signaling, based on the application. DVI cables and ports are created using different connector types to identify what application they are intended to be used in. The connector types are identified by the number of pins on the DVI connector. DVI comes in the following five different connector types: 

Single and Dual link DVI indicate the maximum resolution capabilities of the video source or video destination. The maximum resolutions are Single Link (1920 x 1080 @ 60Hz) and Dual Link (2560 x 1600 @ 60Hz).

Note: The maximum resolution of your video source and video destination are ultimately determined by the technical specifications of the devices. The connector type is not a definitive indicator of the maximum resolution.

DVI-A carries only analog (for example, VGA) with no digital component. DVI-D carries only digital video (for example, HDMI) with no analog component. DVI-I combines DVI-A and DVI-D connections to include both analog and digital components. A DVI-I port may be on either your video source or display, but whether or not a display carries either or both analog and digital sources depends on the technical specifications of your device.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven
Wacht...