Niet meer leverbaar

DisplayPort gender changer - F/F

Verbind twee DisplayPort®-kabels met elkaar om een langere kabel te maken

Productcode: GCDPFF

De DisplayPort gender changer biedt twee vrouwelijke DisplayPort-connectors - een eenvoudige, voordelige oplossing om twee korte DisplayPort-kabels te combineren tot één langere kabel.

De gender changer is uitgerust met duurzame vergulde connectors en een sluiting om losraken te voorkomen. Gedekt door onze levenslange garantie.

Toepassingen

  • Eenvoudige uitbreiding van het bereik van DisplayPort-kabels

Het voordeel van StarTech.com

  • Gemakkelijk te gebruiken en te installeren
  • Gedekt door een levenslange garantie van StarTech.com

Partnernummers

  • Ingram Micro Belgium 1861145
  • Tech Data - Belgium 4462533
  • UPC 065030835572

Specificaties

Warranty Information Warranty Lifetime
Connector(en) 1 - Connector A DisplayPort (20-polig)
1 - Connector B DisplayPort (20-polig)
Fysieke eigenschappen Hoogte product 0,0 mm [0,0 in]
Gewicht product 22,7 g [0,8 oz]
Breedte product 0,0 mm [0,0 in]
Kleur Blauw
Lengte product 55,0 mm [2,2 in]
Hardware Aantal geleiders 20
Connectormateriaal Goud
Type kabelmantel PVC - Polyvinyl Chloride
Verpakkingsinformatie Verzendgewicht (verpakt) 25,4 g [0,9 oz]
Package Length 87,0 mm [3,4 in]
Package Width 12,0 mm [0,5 in]
Package Height 10,6 cm [4,2 in]
Wat wordt er meegeleverd 1 - Meegeleverd DisplayPort gender changer - F/F

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Voor uw aanschaf

You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.

The following table lists the maximum length of cable for common video standards.

Video standard Maximum length
DisplayPort 50 ft. (15.2m)
HDMI 50 ft. (15.2m)
DVI 50 ft. (15.2m)
VGA 200 ft. (71m)

Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).

Video adapters

Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.

Examples of common applications for adapters include the following:

  • DVI-I to VGA

  • RCA to BNC

  • Mini DisplayPort to DisplayPort

  • Couplers (female to female, or male to male)

Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.

Video converters

Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).

Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.

Video extenders

Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.

Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven
Wacht...