The HDMIEXTAA6IN HDMI® Port Saver Cable is a 6-inch HDMI cable designed to prevent wear and tear on the HDMI port on your computer or A/V device (Blu-Ray player, A/V receiver etc.). The port saver cable features 1 HDMI (male) connector and 1 HDMI (female) connector, which extends the HDMI (female) port from a video card or A/V device away from the device itself, relieving the stress of repeated HDMI plug insertions and removals and transferring the weight of typical HDMI cable connection away from the device port.
This high quality HDMI cable fully supports 1080p+ resolutions at up to 120Hz refresh rate, with life-like color. To accommodate the demands of future high definition devices, such as increased resolutions and higher frame rates, this Ultra HD cable supports resolutions up to 4k x 2k.
The HDMIEXTAA6IN 6in HDMI cable is backed by StarTech.com's Lifetime Warranty.
|Connector(en)||1 - Connector A||HDMI (19-polig)|
|1 - Connector B||HDMI (19-polig)|
|Fysieke eigenschappen||Gewicht product||37 g [1,3 oz]|
|Kabellengte||15,2 cm [6,0 in]|
|Lengte product||15,2 cm [6,0 in]|
|Prestaties||Maximale digitale resoluties||4K x 2K @ 30 Hz|
|Verpakkingsinformatie||Package Height||15 mm [0,6 in]|
|Package Length||22,5 cm [8,9 in]|
|Verzendgewicht (verpakt)||42 g [1,5 oz]|
|Package Width||12,5 cm [4,9 in]|
|Wat wordt er meegeleverd||1 - Meegeleverd||6in High Speed HDMI® Port Saver Cable - M/F|
Create Ultra HD connections between your High Speed HDMI®-equipped devices
Provides a high speed connection between HDMI®-enabled devices
When you troubleshoot issues with an HDMI cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the HDMI cable, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different HDMI cable, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the HDMI cable, video source, and video destination, it is recommended that you do the following:
Verify that the source resolution matches the capabilities of the video source destination. For example, if the video destination is only capable of 720p, then the video source cannot output 1080p or 1920 x 1080, as that exceeds the capabilities of the video source destination.
Test at a lower resolution, for example, 1024 x 768.
If you are using 4K resolutions, test with a shorter cable.
If you are experiencing issues with audio over HDMI, ensure that the following is true:
The source is set up to output audio over HDMI.
The destination is compatible with the source's audio format.
The destination's volume was raised.
Note: HDMI to DVI cables, adapters and converters do not support audio unless otherwise noted in the Technical Specifications tab on the product page on the StarTech.com website.