This 6in LP4 to P4 Auxiliary Power Cable Adapter turns a female LP4 connector into the male P4 connector needed for connecting to a Pentium 4 motherboard.
This cable adapter is constructed of top quality materials and designed for durable performance, the LP4 to P4 auxiliary power cable is backed by StarTech.com's Lifetime Warranty.
|Connector(en)||1 - Connector A||LP4 (4-polig; Molex-type Large Drive Power)|
|1 - Connector B||ATX 12 V P4 voeding (4-polig, v 2.x)|
|Fysieke eigenschappen||Gewicht product||10 g [0,4 oz]|
|Kabellengte||15,2 cm [6,0 in]|
|Lengte product||15,2 cm [6,0 in]|
|Verpakkingsinformatie||Package Height||14 mm [0,6 in]|
|Package Length||12,5 cm [4,9 in]|
|Verzendgewicht (verpakt)||12 g [0,4 oz]|
|Package Width||90 mm [3,5 in]|
|Wat wordt er meegeleverd||1 - Meegeleverd||6in LP4 to P4 Auxiliary Power Cable Adapter|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.