This 12in Micro SATA to SATA with LP4 Power Adapter cable lets you connect a regular Serial ATA hard drive to a Micro SATA controller equipped motherboard as well as to the computer power supply through an LP4 connection. A cost-effective compatibility solution, the Micro SATA/SATA adapter cable allows the use of regular SATA drives with Micro SATA motherboards.
Constructed of high quality materials and designed to provide a durable, reliable connection, the Micro SATA to SATA adapter cable is backed by StarTech.com's Lifetime Warranty.
|Connector(en)||1 - Connector A||SATA (7-polig, data)|
|1 - Connector B||LP4 (4-polig; Molex-type Large Drive Power)|
|Micro SATA (16-polig, data & voeding)|
|Kabellengte||30,5 cm [12,0 in]|
|Lengte product||30,5 cm [12,0 in]|
|Hardware||Type kabelmantel||PVC - Polyvinyl Chloride|
|Prestaties||Type en snelheid||SATA III (6 Gbps)|
|Speciale opmerkingen / vereisten||Notitie||Supports 5 Volt devices only|
|Verpakkingsinformatie||Package Length||90 mm [3,5 in]|
|Package Width||27,5 mm [1,1 in]|
|Package Height||8 mm [0,3 in]|
|Verzendgewicht (verpakt)||16 g [0,6 oz]|
|Wat wordt er meegeleverd||1 - Meegeleverd||12in Micro SATA to SATA with LP4 Power Cable Adapter|
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.