Productcode: SAS8087S4100
De SAS8087S4100 SFF-8087 naar 4x SATA SAS-kabel is voorzien van een 36-pins aansluiting (SFF-8087), die zich opsplitst naar vier 7-pins SATA-aansluitingen, een betrouwbare oplossing voor het aansluiten van een SATA harde schijf op een SAS-controller of -backplane.
De 1 meter lange SFF-8087 naar 4x SATA SAS-kabel is ontworpen en gefabriceerd voor langdurige betrouwbaarheid en wordt geleverd met levenslange garantie.
Warranty Information | Warranty | Lifetime |
---|---|---|
Connector(en) | 1 - Connector A | SFF-8087 (36-polig, interne Mini-SAS) |
4 - Connector B | SATA (7-polig, data) | |
Fysieke eigenschappen | Gewicht product | 80 g [2,8 oz] |
Kleur | Rood | |
Stijl connector | Vergrendelbaar | |
Draaddikte | 30 AWG | |
Kabellengte | 100 cm [39,4 in] | |
Lengte product | 100 cm [39,4 in] | |
Hardware | Aantal geleiders | 2 |
Prestaties | Type en snelheid | SATA III (6 Gbps) |
Verpakkingsinformatie | Package Height | 22 mm [0,9 in] |
Package Length | 22,5 cm [8,9 in] | |
Verzendgewicht (verpakt) | 85 g [3,0 oz] | |
Package Width | 12,5 cm [4,9 in] | |
Verpakkingsaantal | 1 | |
Wat wordt er meegeleverd | 1 - Meegeleverd | 1m Serial Attached SCSI SAS Kabel - SFF-8087 naar 4x Vergrendelbare SATA |
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
SATA cable
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.