Product Zoeken
Niet meer leverbaar

1 Port SATA to SATA Slot Plate Bracket

Voeg externe aansluitingen voor data toe aan een bestaande SATA-controller

Productcode: SATAPLATE1

  • Fast data transfer rate of up to 6 Gbps
  • Compliant with Serial ATA III Specifications
  • Built in 1ft cable connects to a Serial ATA controller card

This 1 Port SATA to SATA Slot Plate Bracket adds external data support to any existing Serial ATA controller.

Installation is easy: just install the plate into an open I/O slot on your computer and connect the cables to the Serial ATA connectors on your motherboard or controller card. The slim SATA data cable provides less clutter for increased airflow inside your case. Like all our cable products, the SATAPLATE1 is backed by our lifetime warranty.

Toepassingen

  • Slot plate allows you to use external Serial ATA devices for fast and easy connectivity

Het voordeel van StarTech.com

  • External slot plate adds 1 Serial ATA port to your computer
  • Backed by StarTech.com's lifetime warranty
  • Fast data transfer rate of up to 6 Gbps
  • Easily fits in any PC slot

Partnernummers

  • Ingram Micro Belgium 1590266
  • UPC 065030802758

Specificaties

Warranty Information Warranty Lifetime
Connector(en) 1 - Connector A SATA (7-polig, data)
1 - Connector B SATA (7-polig, data)
Fysieke eigenschappen Kleur Rood
Hardware Type kabelmantel PVC - Polyvinyl Chloride
Prestaties Type en snelheid SATA III (6 Gbps)
Verpakkingsinformatie Package Length 19,9 cm [7,8 in]
Package Width 20 mm [0,8 in]
Package Height 21,1 cm [8,3 in]
Verzendgewicht (verpakt) 50 g [1,8 oz]
Wat wordt er meegeleverd Meegeleverd 1 Port SATA to SATA Slot Plate Bracket

Accessoires

SATA24

60cm SATA Serial ATA Kabel

Deze hoogwaardige SATA-kabel is ontworpen voor het aansluiten van SATA-schijven zelfs in kleine ruimtes.

Uw prijs
€4,99 EUR excl. VAT
€6,04 EUR incl. VAT
SATA18

45 cm SATA Serial ATA Kabel

Deze hoogwaardige SATA-kabel is ontworpen voor het aansluiten van SATA-schijven zelfs in kleine ruimtes.

Uw prijs
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT
SATA36

90 cm SATA Serial ATA Kabel

Verbind en monteer SATA-schijven op eenvoudige wijze – ontworpen voor grotere behuizingen

Uw prijs
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Troubleshooting

When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven