Productcode: SATAPOWADPL
De SATAPOWADPL Molex-naar-90º-SATA-voedingsdapter beschikt over een 4-pins Molex (LP4)-stekker en een linkshoekige, 90º SATA-voedingsconnector (vrouwelijk), waardoor u een seriële ATA harde schijf vanaf een conventionele LP4-verbinding kunt voeden. Hierdoor hoeft u de voedingsbron van de computer niet te upgraden in verband met compatibiliteit met de SATA harde schijf.
Dankzij de 90º (linkshoekige) SATA-voedingsconnector is het eenvoudiger om een in moeilijk bereikbare of nauwe plekken geïnstalleerde SATA harde schijf aan te sluiten, waardoor de connector en de kabel niet worden overbelast.
Op deze LP4-naar-SATA-adapter is de levenslange garantie van StarTech.com van toepassing.
Warranty Information | Warranty | Lifetime |
---|---|---|
Connector(en) | 1 - Connector A | LP4 (4 pin; Large Drive Power) |
1 - Connector B | SATA voeding (15-polig) | |
Fysieke eigenschappen | Hoogte product | 21,6 mm [0,9 in] |
Gewicht product | 15,0 g [0,5 oz] | |
Breedte product | 24,6 mm [1,0 in] | |
Stijl connector | Haaks met hoek naar links | |
Kabellengte | 15,2 cm [6,0 in] | |
Lengte product | 15,2 cm [6,0 in] | |
Verpakkingsinformatie | Package Height | 22,0 cm [8,7 in] |
Package Length | 0,7 mm [0,0 in] | |
Verzendgewicht (verpakt) | 23,0 g [0,8 oz] | |
Package Width | 12,8 cm [5,0 in] | |
Verpakkingsaantal | 1 | |
Wat wordt er meegeleverd | 1 - Meegeleverd | 4-pins LP -naar-linkshoekige SATA-voedingskabeladapter 15 cm |
Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)Wij staan altijd klaar om al uw vragen te beantwoorden.
Chat Live (opens in new window)When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Power supply
Computer part
Power cable
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.