Product Zoeken
Niet meer leverbaar

20in Right Angle Slimline SATA to SATA w/ LP4 Power Cable

Monteer slimline-schijven in systemen met standard SATA-controllers

Productcode: SLSATAF20RA

  • 1x SATA connector
  • 1x Molex (LP4) power connector
  • 1x Right-Angled Slimline SATA connector

The SLSATAF20RA Right-Angle Slimline SATA to SATA with LP4 Power Cable (20-inch) features a SATA data receptacle and a Molex (LP4) power connection on one end, and a right-angle Slimline Serial ATA receptacle on the other - enabling you to connect a slim SATA drive to a computer motherboard that does not have a Slimline connection available.

Plus, the right-angled Slimline SATA connector allows for connectivity in narrow spaces, enabling installation of the drive as needed within the system case.

Constructed of only top quality materials and designed for optimum performance and reliability the SLSATAF20RA supports full SATA 3.0 bandwidth (up to 6Gbps) when used with SATA 3.0 compliant drives and is backed by our lifetime warranty.


  • Add a Slimline optical drive to a desktop PC

Het voordeel van

  • Cost-effective solution for connecting a Slimline SATA drive to a SATA equipped computer motherboard
  • Right-angled Slimline SATA connector easily fits into hard to reach areas and tight spaces, providing flexibility to position your Slimline optical drive as needed within your system case
  • Backed by lifetime warranty, ensuring a dependable connection


  • Ingram Micro Belgium 1610877
  • UPC 065030838870


Warranty Information Warranty Lifetime
Connector(en) 1 - Connector A Slimline SATA (13-polig, data & voeding)
1 - Connector B LP4 (4-polig; Molex-type Large Drive Power)
SATA (7-polig, data)
Fysieke eigenschappen Kleur Rood
Stijl connector Recht naar haaks rechts
Draaddikte 26 AWG (0.404 mm)
Kabellengte 50,8 cm [20,0 in]
Gewicht product 51 g [1,8 oz]
Hardware Type kabelmantel PVC - Polyvinyl Chloride
Prestaties Type en snelheid SATA III (6 Gbps)
Verpakkingsinformatie Package Length 12,5 cm [4,9 in]
Package Width 20 mm [0,8 in]
Package Height 22,1 cm [8,7 in]
Verzendgewicht (verpakt) 30 g [1,1 oz]
Wat wordt er meegeleverd 1 - Meegeleverd 20in Slimline SATA to SATA and LP4 cable



SATA naar LP4 Verloopkabel Voeding met 2 extra LP4

Voorziet maximal 3 apparaten van stroom via de SATA-voedingsaansluiting van uw computervoeding

Uw prijs
€6,99 EUR excl. VAT
€8,46 EUR incl. VAT

SATA naar LP4 Verloopkabel Voeding

Voorzie een IDE-schijf van stroom via een SATA-voedingsaansluiting.

Uw prijs
€3,99 EUR excl. VAT
€4,83 EUR incl. VAT

SATA naar LP4 met 2x SATA splitter voedingskabel

Voeg een SATA- en LP4-voedingsaansluiting toe aan een enkele SATA-voedingsaansluiting

Uw prijs
€4,99 EUR excl. VAT
€6,04 EUR incl. VAT

LP4 naar SATA Verloopkabel Voeding met Floppy-aansluiting

Voed twee 4-pin Molex harde schijven of apparaten, en een floppy-drive, vanuit een enkele SATA-voedingsconnector

Uw prijs
€5,99 EUR excl. VAT
€7,25 EUR incl. VAT


Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)



Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)


When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Hard disk drive

  • Hard drive controller (for example, motherboard)

  • SATA cable

To test your setup components, try the following:

  • Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.

  • Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:

  • Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.

  • If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.

For more information about how to initialize a drive, refer to the following FAQ:

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven