Niet meer leverbaar

4-poorts SuperSpeed USB 3.0 Dual Link DVI KVM switch met audio en kabels

Bestuur 4 pc's met Dual Link DVI, USB 3.0 met één monitor, één toetsenbord, één muis en één audiorandapparaat

Productcode: SV431DLU3A

  • Geïntegreerde USB 3.0 (5 Gbps)-hub
  • Eenvoudige computerselectie via druktoetsen op het voorpaneel of sneltoetsen
  • Inclusief video-, audio- en USB-kabels

Met de SV431DLU3A 4-poorts USB 3.0 Dual-Link DVI KVM switch kunt u met één beeldscherm, toetsenbord, muis en audiorandapparatuur 4 pc's met DVI en USB 3.0 gebruiken. Voor nog meer gebruiksgemak zorgen de meegeleverde KVM-kabels.

Deze USB 3.0 KVM switch biedt een geïntegreerde 2-poorts hub die USB 3.0 datatransmissiesnelheden van maximaal 5 Gbps ondersteunt. De switch is neerwaarts compatibel met USB 2.0 en 1.1/1.0-apparatuur, waardoor u uw USB-randapparatuur moeiteloos kunt gebruiken.

Deze 4-poorts Dual Link DVI KVM switch ondersteunt hoge resoluties (maximaal 2560x1600), waardoor u gemakkelijk grote Dual Link DVI-beeldschermen kunt gebruiken, ideaal voor grafische toepassingen die een video-output met hoge resolutie vragen.

Gedekt door een 2-jarige garantie en gratis levenslange technische ondersteuning van StarTech.com.

Toepassingen

  • Gebruik vier DVI USB computers met één set randapparatuur (toetsenbord, muis en scherm)
  • Ideaal voor financiële instellingen, grafisch ontwerpers, multimediatoepassingen en CAD/CAM-applicaties
  • Dankzij de geïntegreerde USB 3.0-hub en microfoon/audio heeft u volledige multimediacontrole over twee computers en kunt u thuis of op kantoor USB-randapparatuur delen

Het voordeel van StarTech.com

  • Benut de volle snelheid van uw gedeelde USB 3.0 randapparaten met de geïntegreerde USB 3.0 hub
  • Bespaar tijd en geld met een complete KVM-oplossing, inclusief USB-, video- en audiokabels
  • Geniet van universele, besturingssysteemafhankelijke compatibiliteit zonder dat software of stuurprogramma's vereist zijn

Partnernummers

  • Ingram Micro Belgium 2647667
  • UPC 065030854467

Compatibility

Specificaties

Warranty Information Warranty 2 Years
Connector(en) 2 - Console-aansluiting(en) 3,5 mm mini-jack (3 standen)
USB Type-A (4-polig) USB 2.0
1 - Console-aansluiting(en) DVI-I (29-polig)
4 - Hostaansluitingen USB Type-B (9-polig) USB 3.0
DVI-I (29-polig)
8 - Hostaansluitingen 3,5 mm mini-jack (3 standen)
2 - Andere aansluiting(en) USB Type-A (9-polig) USB 3.0 (5 Gbps)
Fysieke eigenschappen Kleur Zwart
Type behuizing Staal
Lengte product 25,5 cm [10,0 in]
Breedte product 10,2 cm [4,0 in]
Hoogte product 4,5 cm [1,8 in]
Gewicht product 950 g [33,5 oz]
Gebruiksomgeving Bedrijfstemperatuur 0°C to 40°C (32°F to 104°F)
Opslagtemperatuur -20°C to 60°C (4°F to 140°F)
Vochtigheid 0% - 90% rel. vochtigheid, niet-condenserend
Hardware Audio Ja
KVM-poorten 4
Ondersteunde platforms USB 3.0
PC-videotype DVI
Multi-monitor 1
Rack-monteerbaar Nee
Inclusief kabels Ja
Op elkaar aansluitbaar Nee
Indicatoren 4 - LED-indicatoren PC-keuzeindicator
Hub-keuzeindicator
Prestaties IP-controle Nee
Hot-Key Selection Ja
Maximale kabellengte 10 m [32,8 ft]
Maximale digitale resoluties 2560 x 1600
Audiospecificaties 2-kanaals stereo ondersteund
Poortselectie-ondersteuning Knopdruk en sneltoetsen
MTBF 94,650 Hours
Software Besturingssystemen OS independent; No software or drivers required
Verpakkingsinformatie Package Height 19,1 cm [7,5 in]
Package Length 27 cm [10,6 in]
Package Width 16 cm [6,3 in]
Verzendgewicht (verpakt) 3,3 kg [7,2 lb]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 - 240 AC
Ingangsstroom 0.5 A
Uitgangsspanning 9V DC
Uitgangsstroom 2 A
Polariteit pin midden Positief
Stekkertype M
Wat wordt er meegeleverd 1 - Meegeleverd 4-poorts USB 3.0 KVM-switch
Universele voedingsadapter (US/UK/EU)
Handleiding
4 - Meegeleverd DVI-D M/M-kabels
USB 3.0 A-B-kabels
Audio/microfoonkabels 3,5 mm

Accessoires

USB3SAB10

10 ft SuperSpeed USB 3.0 Cable A to B - M/M

Sluit uw externe apparaten aan en zet gegevens over 10x sneller dan met USB 2.0

Uw prijs
€11,99 EUR excl. VAT
€14,51 EUR incl. VAT
MU10MMS

3 m slanke 3.5mm Stereo Audio kabel - M/M

3m slanke 3,5mm Stereo Aux kabel

Uw prijs
€4,99 EUR excl. VAT
€6,04 EUR incl. VAT
SVA9M2NEUA

DC voedingsadapter - 9V, 2A

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€21,99 EUR excl. VAT
€26,61 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the video cables from your monitors to the console video port on the KVM switch. 
  4. Turn on the monitors.
  5. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.
  6. If you have not done so already, change the KVM switch to focus on port 1.
  7. Connect the video cables from PC1 to the KVM switch.
  8. Connect the PS/2 or USB cables from PC1 to the PC1 PS/2 or USB ports on the KVM switch.
  9. Turn on PC1. You should see the computer load the operating system that you are using on PC1.
  10. Make sure that the mouse and keyboard can control PC1.
  11. Repeat steps 4 to 8 for each additional computer that you want to connect to the KVM switch. Leave the computer in focus until you make sure that the mouse and keyboard can control the computer in step 8.

Troubleshooting

There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds.  Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.

You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • KVM switch

  • Video source (such as a DVR or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.

To test your setup components, try the following:

  • Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.

There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch. 

  • To determine if a specific cable is the source of the problem, switch the cables that connect the KVM switch to the computers to one working port and computer, and one port and computer that is not working. Keep the computer plugged into the same ports and only switch the cables. If the issue persists when you switch cables, the issue may be with the cable itself.
  • To determine if the problem is between the computer and the KVM switch, using the same cables, connect the KVM switch to one computer that is working and one computer that is not working. If the issue persists when you switch computers, follows the issue may be with the computer and the KVM switch.
  • Try reinitializing the KVM.  This is done by following the setup instructions on the website.
  • To determine if the KVM switch is the source of the problem, if you have another KVM switch, disconnect the current KVM switch and connect the second KVM switch.

If the keys on your keyboard are repeating, complete the following:

  1. If the KVM you are using has USB ports, you can move your keyboard to the USB hub port on the back of the KVM (the USB hubs are marked).

Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.

  1.  You can adjust the typematic rate in your operating system’s settings. Depending on the version of Windows you are running, you can adjust the typematic rate by doing one of the following:
    • Click Control Panel > Keyboard > Speed. Adjust the repeat delay and repeat rate until the keys no longer repeat.
    • Click Control Panel > Hardware and Sound > Devices and Printers. Right-click Keyboard Settings. Adjust the repeat delay and repeat rate until the keys no longer repeat.

Voor uw aanschaf

Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use.  Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues.  This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards.  We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.

If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Wacht...
Terug naar boven