8-poort 1U-Rack USB KVM-switch met OSD en Bekabeling

Een complete 8-poort USB KVM-set, inclusief alle benodigde kabels en toebehoren

Productcode: SV831DUSBUK

  • Wordt geleverd met 8 stuks 1,80m lange USB KVM-kabels
  • USB-toetsenbord en -muiscombinatie / draadloze sets ondersteund via één USB-aansluiting
  • Beveiligingsmogelijkheid via OSD om bepaalde KVM-poorten met een wachtwoord tegen onbevoegd gebruik te beschermen
Uw prijs
€479,99 EUR excl. VAT
€580,79 EUR incl. VAT
De SV831DUSBUK 8-poort USB KVM-switch Set biedt u een goed uitgeruste KVM-switch en alle benodigde kabels en accessoires om meteen een verbinding te kunnen leggen met 8 servers of pc's, wat de installatie gemakkelijk en eenvoudig maakt. De USB KVM-switch is een betrouwbare oplossing voor computerbeheer waarmee u maximaal 8 via USB aangesloten computers kunt bedienen vanaf één toetsenbord, muis en beeldscherm. U kunt omschakelen via sneltoetsen op het toetsenbord of druktoetsen op het voorpaneel en biedt ook een handig schermmenu (OSD, on-screen display) voor de instellingen. De 8-poort KVM-switch is een toepasselijke aanvulling voor uw serverruimte en kan worden gemonteerd op 1U in een rack of patchkast. Bovendien kan het worden gecombineerd met meerdere KVM-switches voor het bedienen van maximaal 64 computers met behulp van dit ene apparaat. Met 3 jaar garantie en gratis levenslange technische ondersteuning door StarTech.com

Toepassingen

  • Nuttig in testlaboratoria voor software waar meerdere besturingssystemen worden gebruikt
  • Ideaal voor het testen / inbranden van computers en bespaart de kosten extra randapparatuur te moeten aanschaffen
  • Centrale bediening van meerdere systemen in een datacenter
  • Beheer uw serverpark efficiënt vanaf een enkele console door switches op elkaar aan te sluiten
  • Beheer en bediening van computers in een productielijn

Het voordeel van StarTech.com

  • Om de installatie te vereenvoudigen zijn de USB/VGA KVM-kabels om alle 8 poorten te kunnen sluiten op servers en pc's meegeleverd
  • Uitstekende compatibiliteit met USB-toetsenbord en -muiscombinaties en draadloze systemen; anders dan bij de meeste KVM-switches detecteert dit unieke model de toetsenbordaanslagen in de USB-verbinding zodat uw systeem probleemloos werkt

Partnernummers

  • Ingram Micro Belgium 1822445
  • Tech Data - Belgium 4462050
  • UPC 065030843331

Compatibility

Specificaties

Warranty Information Warranty 3 Years
Connector(en) 2 - Console-aansluiting(en) USB Type-A (4-polig) USB 2.0
1 - Console-aansluiting(en) VGA (15-polig, D-Sub met hoge dichtheid)
8 - Hostaansluitingen VGA (15-polig, D-Sub met hoge dichtheid)
Fysieke eigenschappen Gewicht product 2.2 kg [4.9 lb]
Kleur Zwart
Type behuizing Staal
Breedte product 43.5 cm [17.1 in]
Hoogte product 45 mm [1.8 in]
Diepte product 18 cm [7.1 in]
Gebruiksomgeving Bedrijfstemperatuur 5°C to 40°C (41°F to 104°F)
Opslagtemperatuur -20°C to 60°C (-4°F to 140°F)
Vochtigheid 0% - 80% rel. luchtvochtigheid
Hardware Audio Nee
KVM-poorten 8
Ondersteunde platforms USB
PC-videotype VGA
Multi-monitor 1
Rack-monteerbaar Ja
Inclusief kabels Ja
U-hoogte 1U
Op elkaar aansluitbaar Ja
Indicatoren 1 - LED-indicatoren Groen - Power
8 - LED-indicatoren Groen - PC online
Rood - PC geselecteerd
Prestaties Schermmenu & sneltoetsen Ja
IP-controle Nee
Hot-Key Selection Ja
Maximale analoge resoluties 1920 x [email protected] (1920 x [email protected] - Wide Screen)
Ondersteuning breedbeeld: Ja
Maximum aantal gebruikers 1
Max. op elkaar aansluitbare computers 64
Poortselectie-ondersteuning Knopdruk, sneltoetsen en schermmenu (OSD, On Screen Display)
MTBF 150000 uur
Software Besturingssystemen OS independent; No software or drivers required
Verpakkingsinformatie Package Height 12.1 cm [4.8 in]
Package Length 60.6 cm [23.9 in]
Verzendgewicht (verpakt) 4.6 kg [10.3 lb]
Package Width 26.2 cm [10.3 in]
Voeding Inclusief voedingsadapter Inclusief wisselstroomadapter
Ingangsspanning 100 - 240 AC
Uitgangsspanning 12V DC
Uitgangsstroom 1A
Polariteit pin midden Positief
Vermogensopname 12
Wat wordt er meegeleverd 1 - Meegeleverd StarView 8-poort USB KVM-switch
2 - Meegeleverd Montagebeugels
8 - Meegeleverd 1,80m 2-in-1 USB VGA KVM-kabels
1 - Meegeleverd Universele voedingsadapter (US/EU/GB/AU)
Handleiding

Accessoires

SVUSBVGA6

1,80m ultradunne 2-in-1 USB VGA KVM-kabel

Sluit VGA-video en USB aan via een enkele dunne KVM-kabel

Uw prijs
€12,99 EUR excl. VAT
€15,72 EUR incl. VAT
SVUSBVGA10

3m ultradunne 2-in-1 USB VGA KVM-kabel

Sluit VGA-video en USB aan via een enkele dunne KVM-kabel

Uw prijs
€18,99 EUR excl. VAT
€22,98 EUR incl. VAT
SVA12M2NEUA

DC power adapter - 12V, 2A - voedingsadapter

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€24,99 EUR excl. VAT
€30,24 EUR incl. VAT
SVECONUS6

1,80 m Ultradun 2-in-1 USB KVM-kabel

Sluit VGA-video en USB aan via een enkele dunne KVM-kabel

Uw prijs
€12,99 EUR excl. VAT
€15,72 EUR incl. VAT
SVA12M5NA

DC power adapter - 12V, 5A - voedingsadapter

Vervang uw zoekgeraakte of defecte voedingsadapter

Uw prijs
€62,99 EUR excl. VAT
€76,22 EUR incl. VAT
SVECONUS10

3 m Ultradun USB VGA 2-in-1 KVM-kabel

Sluit VGA-video en USB aan via een enkele dunne KVM-kabel

Uw prijs
€18,99 EUR excl. VAT
€22,98 EUR incl. VAT
SVECONUS15

4,50m 2-in-1 USB KVM-kabel Ultradun

Sluit VGA-video en USB aan via een enkele dunne KVM-kabel

Uw prijs
€26,99 EUR excl. VAT
€32,66 EUR incl. VAT
SV565UTPUL

Lange Afstand USB VGA KVM Console-Verlenger via Cat5 UTP - 300 m

Bedien een KVM of server tot op 300 m afstand.

Uw prijs
€577,99 EUR excl. VAT
€699,37 EUR incl. VAT

Drivers/Downloads

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Handleiding:

Datasheet

Productondersteuning

Praat met een adviseur.

Wij staan altijd klaar om al uw vragen te beantwoorden.

Chat Live (opens in new window)

Veelgestelde vragen (FAQ)

Installatie

  1. Turn off all of the computers and monitors that will be connected to the KVM switch.
  2. Connect the power adapter to the KVM switch.
  3. Connect the video cables from your monitors to the console video port on the KVM switch. 
  4. Turn on the monitors.
  5. Connect your keyboard and mouse to the console PS/2 or USB ports on the KVM switch.
  6. If you have not done so already, change the KVM switch to focus on port 1.
  7. Connect the video cables from PC1 to the KVM switch.
  8. Connect the PS/2 or USB cables from PC1 to the PC1 PS/2 or USB ports on the KVM switch.
  9. Turn on PC1. You should see the computer load the operating system that you are using on PC1.
  10. Make sure that the mouse and keyboard can control PC1.
  11. Repeat steps 4 to 8 for each additional computer that you want to connect to the KVM switch. Leave the computer in focus until you make sure that the mouse and keyboard can control the computer in step 8.

Troubleshooting

There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds.  Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.

You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • KVM switch

  • Video source (such as a DVR or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.

To test your setup components, try the following:

  • Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.

There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch. 

  • To determine if a specific cable is the source of the problem, switch the cables that connect the KVM switch to the computers to one working port and computer, and one port and computer that is not working. Keep the computer plugged into the same ports and only switch the cables. If the issue persists when you switch cables, the issue may be with the cable itself.
  • To determine if the problem is between the computer and the KVM switch, using the same cables, connect the KVM switch to one computer that is working and one computer that is not working. If the issue persists when you switch computers, follows the issue may be with the computer and the KVM switch.
  • Try reinitializing the KVM.  This is done by following the setup instructions on the website.
  • To determine if the KVM switch is the source of the problem, if you have another KVM switch, disconnect the current KVM switch and connect the second KVM switch.

If the keys on your keyboard are repeating, complete the following:

  1. If the KVM you are using has USB ports, you can move your keyboard to the USB hub port on the back of the KVM (the USB hubs are marked).

Note: When you move the keyboard out of the keyboard port, you will not be able to access the hotkeys.

  1.  You can adjust the typematic rate in your operating system’s settings. Depending on the version of Windows you are running, you can adjust the typematic rate by doing one of the following:
    • Click Control Panel > Keyboard > Speed. Adjust the repeat delay and repeat rate until the keys no longer repeat.
    • Click Control Panel > Hardware and Sound > Devices and Printers. Right-click Keyboard Settings. Adjust the repeat delay and repeat rate until the keys no longer repeat.

Hoe gaat u te werk

Voor uw aanschaf

KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers.  KVM switches also commonly let you switch audio and USB devices between computers.

There are different types of KVM switches as well.

  • Standard box KVM switches. (e.g. SV231USB)
  • Cable KVM switches. (e.g. SV211USB)
  • Multi-Monitor KVM switches.  (e.g. SV231DDUSB)
  • IP KVM switches. (e.g. SV841HDIE)

Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers.  Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.

Here are some important things to consider before purchasing a KVM switch.

  • How many computers do you need to control?  Purchase a KVM switch that supports the number of computers in your setup.
  • Which video connections do your computers and display(s) support?  It is best practice to use the same video connections wherever possible.
  • Will you be using a PS/2 or USB mouse and keyboard?
  • Do you need multiple monitor support?  Ensure every computer can support the number of monitors you are looking to use in your setup.
  • Do you need audio support?
  • What resolution(s) do you want your display(s) running at?  The KVM switch must support the resolution(s) you want to use.
  • Would you like hotkey support?  Some KVM switches support the use of hotkey combinations to complete tasks such as switching between computers.

There are a couple of other important things you may want to take note of:

  • Some KVM switches require proprietary cables to function.  These KVM cables may vary by each KVM switch.  For StarTech.com KVM switches that require proprietary cables, the KVM switches will either come with these cables, or they will be listed in the Accessories tab on the individual product pages.  For more information, see our video dedicated to KVM switch cables.
  • Basic mice and keyboards are recommended for use with KVM switches.  Wireless, gaming or combo mice and keyboards (mice and keyboards that use a single USB connection / receiver for both units) can cause performance issues, and in general, are not supported for use with KVM switches.

It can be difficult to tell which ones are right for the KVM switch you are interested in.  How can you tell which KVM cables you require?  How can you tell if a KVM switch requires proprietary cables?  How do these cables work? 

Standard KVM Switches and Cables

Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.

Standard KVM switches have no special cable requirements.  If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers.  StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings.  Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.

KVM Switches with Opposite Gender Video Connections

Some KVM switches use male video connections for the computers and female video connections for the console ports.  In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch.  This is so you cannot accidentally plug cables from your computer into the console ports.

KVM Switches Requiring Proprietary Cables

KVM switches can also use proprietary KVM cables to connect to the individual computers.  This is often done with larger KVM switches and KVM switches intended for a server environment.  These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.

If you are unsure whether or not you need special cables, complete the following:

  1. Check the Technical Specifications tab on the individual product pages for What's in the Box.  This section lists everything that comes with your purchase, and your KVM switch might come with the cables.
  2. Check the Accessories tab.  This section lists potential accessories for the product you are looking at.  StarTech.com will list the appropriate KVM cables for the KVM switch here. 
  3. Check the Gallery and look at a picture of the back of the KVM switch.

Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.

If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.  

Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use.  Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues.  This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards.  We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.

If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.

Compliance and safety

Compliance letters

  • WEEE
    • Taal: English
  • RoHS
    • Taal: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Uitvoering en specificaties van het product zijn zonder aankondiging vatbaar voor wijzigingen.
Terug naar boven