Product ID: SAS729PW18
Ideal for use with SAS external storage devices, Host Bus Adapters and RAID controllers, this high quality 18in SAS (29-Pin) to SATA Cable delivers both power (LP4) and data connectivity.
This high quality SAS-SATA cable is backed by StarTech.com's Lifetime Warranty.
*Please note that the SATA controller must support SAS drives.
|Connector(s)||Connector A||1 - SATA (7 pin, Data)|
|Connector B||1 - SFF-8482 (29 pin, Data & Power, Internal SAS)|
|1 - LP4 (4 pin; Large Drive Power)|
|Packaging Information||Package Height||25 mm [1.0 in]|
|Package Length||22.5 cm [8.9 in]|
|Shipping (Package) Weight||0.0 kg [0.1 lb]|
|Package Width||12.5 cm [4.9 in]|
|Physical Characteristics||Weight of Product||30 g [1.1 oz]|
|Cable Length||457.2 mm [18.0 in]|
|Product Length||45.7 cm [18.0 in]|
|What's in the Box||Included in Package||1 - 18in SAS 29 Pin to SATA Cable with LP4 Power|
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.