Product ID: POEINJ1GW
This Gigabit Power over Ethernet (PoE+) injector supplies power and data connectivity to a Gigabit PoE-compliant device using standard Ethernet cable, at distances of up to 100 m (330 ft.).
The PoE midspan is a cost-effective alternative to upgrading your existing network switch to a PoE-capable model.
This versatile PoE injector lets you connect a PoE-powered device (PD) to a non-PoE network switch, so you can avoid the expense and aggravation of replacing your existing switch with a PoE-enabled model. It supplies up to 30 watts of power, so you can easily power and access a high-power PoE-compliant device, such as an IP camera or a wireless access point (WAP), using traditional copper (RJ45) Ethernet cable. The midspan injector makes it easy to extend data and power connectivity to your PoE+ device across long distances, even in a remote location where a typical power outlet isn’t available.
You can integrate this compact injector discreetly into a variety of environments. It features a surface-mountable housing that’s perfect for installing on walls or under a desk, but it’s also palm-sized, for use on desktop surfaces.
Plus, with plug-and-play operation, you can enjoy fast and hassle-free setup without disrupting your workflow.
Not sure which class your PoE device is? The Gigabit PoE+ injector automatically detects the power requirements of your connected PoE PD, and delivers the appropriate level of power without damaging your device.
The POEINJ1GW is backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||Connector Type(s)||2 - RJ-45|
|Environmental||Operating Temperature||0°C to 45°C (32°F to 113°F)|
|Storage Temperature||-20°C to 85°C (-4°F to 185°F)|
|Humidity||10~90% RH (Non-Condensing)|
|Industry Standards||IEEE 802.3af PoE, IEEE 802.3at PoE+|
|IEEE 802.3 (10BASE-T), IEEE 802.3u (100BASE-TX), IEEE 802.3ab (1000BASE-T)|
|Indicators||LED Indicators||1 - Power|
|Packaging Information||Package Height||76 mm [3.0 in]|
|Package Length||19 cm [7.5 in]|
|Shipping (Package) Weight||1.0 kg [2.3 lb]|
|Package Width||23 cm [9.1 in]|
|Performance||Maximum Data Transfer Rate||2 Gbps (Full-Duplex)|
|Maximum Cable Length||100000.0|
|General Specifications||Power Output: 48 V DC, 30 W|
|Product Length||7 cm [2.8 in]|
|Product Width||63 mm [2.5 in]|
|Product Height||2.5 cm [1.0 in]|
|Weight of Product||50 g [1.8 oz]|
|Power||Power Source||AC Adapter Included|
|Input Voltage||100 - 240 AC|
|Input Current||0.75 A|
|Output Voltage||56 DC|
|Output Current||0. 64 A|
|Center Tip Polarity||Positive|
|Power Consumption (In Watts)||36|
|Special Notes / Requirements||Patents and Licenses||The following patents are licensed for this product. This list might not be all inclusive.
• United States Patent No. 5,406,260 (expired)
• United States Patent No. 6,650,622
• United States Patent No. 7,457,250
• United States Patent No. 8,155,012
• United States Patent No. 8,902,760
• United States Patent No. 8,942,107
• United States Patent No. 9,019,838
• United States Patent No. 9,049,019
• United States Patent Application No. 14/695,456
• United States Patent Application No. 14/726,940
|System and Cable Requirements||If your connected devices do not meet the IEEE 802.3af or IEEE 802.3at PoE standard, then the POEINJ1GW will not inject power to the connected device(s) / Ethernet cable(s)|
|What's in the Box||Included in Package||1 - Gigabit midspan|
|4 - screws|
|1 - universal power adapter|
|3 - power cords (EU, UK, ANZ)|
|1 - quick-start guide|
Connect to, configure and remotely manage an RS-232 serial device over an IP network