Product ID: SV565UTPHDU
The SV565UTPHDU USB HDMI® KVM Extender lets you control a PC from up to 330ft (100m) away over a single Cat 5e or Cat 6 cable connection, with uncompressed 1080p HDMI video and access to up to 3 connected USB devices.
A flexible solution for powering large high-definition displays remotely, this HDMI USB extender supports uncompressed 1080p or 1920x1200 video resolutions at maximum distance. Additional features such as 3D support, HDCP, CEC and Lip Sync pass-through enable you to display your content exactly as you need it on the remote display.
This versatile KVM console extender can be connected to a single system, or cascaded to an existing KVM switch for remote operation of multiple systems, and features 3 USB 2.0 ports on the remote end, allowing you to connect a keyboard, mouse, printer or other peripherals. Since the extender uses Cat 5e (or better) network cable, you have the option to use existing infrastructure wiring, which helps avoid the hassle and expense of running bulky video cables.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Console Interface(s)||RJ-45|
|HDMI (19 pin)|
|3 - Console Interface(s)||USB Type-A (4 pin) USB 2.0|
|1 - Host Connectors||USB B (4 pin)|
|HDMI (19 pin)|
|Environmental||Operating Temperature||0°C to 40°C (32°F to 104°F)|
|Storage Temperature||-20°C to 70°C (-4°F to 158°F)|
|Humidity||20~80% RH (Non-Condensing)|
|PC Video Type||HDMI|
|Number of Monitors Supported||1|
|Indicators||1 - LED Indicators||Power|
|Packaging Information||Package Height||10.3 cm [4.1 in]|
|Package Length||37.5 cm [14.8 in]|
|Package Width||21.4 cm [8.4 in]|
|Shipping (Package) Weight||2.5 kg [5.4 lb]|
|Maximum Data Transfer Rate||30 Mbps (USB)|
|Max Transfer Distance||100 m (328 ft)|
|Maximum Digital Resolutions||Full uncompressed 1080p and 1920x1200
|Color Depth||30/36-bit Deep Color|
|Product Length||17.5 cm [6.9 in]|
|Product Width||11.2 cm [4.4 in]|
|Product Height||30 mm [1.2 in]|
|Weight of Product||847 g [29.9 oz]|
|Power||Power Source||2 AC Adapters Included|
|Input Voltage||100 - 240 AC|
|Input Current||0.6 A|
|Output Voltage||5 DC|
|Output Current||3 A|
|Center Tip Polarity||Positive|
|Power Consumption (In Watts)||15|
|Software||OS Compatibility||OS independent; No software or drivers required|
|Special Notes / Requirements||Note||Product measurements indicate a single unit only (either Host or Remote) Config port: reserved for manufacturer use|
|What's in the Box||1 - Included in Package||local transmitter unit|
|remote receiver unit|
|2 - Included in Package||universal power adapters (NA, EU ,UK)|
|1 - Included in Package||quick-start guide|
There are some quick tests that you can complete to rule out potential issues. You can test to make sure that the following components are working correctly and are not the source of the issue:
Note: When you test setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.
To test your setup components, try the following:
When you test your cables, it is recommended that you do the following:
When you test the video source and video destination, it is recommended that you do the following:
Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.
This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.
When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.
|VGA||HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.|
|DisplayPort||HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.|
This device has an HDMI input port. If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.
DVI to HDMI video converters: https://www.startech.com/Cables/Audio-Video/Video-Adapter/HDMI-Cable-Adapters/.
DVI to HDMI video cables: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.
DisplayPort to HDMI passive converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Passive.
DisplayPort to HDMI active converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Active.
The converter that you require depends on the type of DisplayPort video source that you are using. For more information about converting DisplayPort video signals, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.