2x2 High Resolution Matrix VGA Video Switch

Share two distinct VGA input source signals between two displays or projectors

Product ID: ST222MX

0 stars (0 reviews) |
  • Allows you to switch video input signals on both monitors
  • Allows two computers to provide video input to display on 2 different monitors
  • Equipped with easy to use front panel selection buttons
Your price
$2,329.27 MXN
VAT included in the price

This Dual Input VGA Matrix Splitter not only provides optimal convenience and control, but also exceptional video quality on multiple monitor configurations.

This 2 port VGA Matrix Video Splitter allows you to input two distinct video signals that can be switched for viewing on either or both of the two connected monitors at the push of a button.

Plus, multiple VGA Matrix video splitters can be connected together (cascaded), allowing you to quickly switch between up to eight displays.

The VGA Matrix splitter is broadly compatible with industry video standards, including VGA, SVGA, XGA and multisync monitors, and provides exceptional video bandwidth (250MHz) and a maximum resolution of 1920 x 1440 pixels.

Applications

  • Demos and presentations
  • Public broadcast systems
  • Information kiosks
  • In-store product merchandising

The StarTech.com Advantage

  • Allows you to connect 2 computers to 2 monitors and switch video signals to any desired display
  • Built-in video amplifier boosts the signal to allow a cable length of up to 210 ft or 65m
  • Provides high quality resolution of up to 1920 x 1440 pixels

Partner Numbers

  • Ingram Mexico A8400VA
  • UPC 065030805230

Specifications

Warranty Information Warranty 2 Years
Connector(s) 2 - Connector A VGA (15 pin, High Density D-Sub)
2 - Connector B VGA (15 pin, High Density D-Sub)
Hardware Ports 2
AV Input VGA
AV Output VGA
Audio No
Indicators 4 - LED Indicators Port Selection indicators - 2 Red, 2 Green
Packaging Information Package Height 2.6 in [67.0 mm]
Package Length 9.1 in [23.0 cm]
Shipping (Package) Weight 23.0 oz [652.0 g]
Package Width 6.1 in [15.5 cm]
Performance Maximum Cable Length 213.2 ft [65 m]
Maximum Analog Resolutions 1920x1440
Bandwidth 250MHz
Physical Characteristics Weight of Product 15.5 oz [439.0 g]
Color Gray
Product Length 5.1 in [13.0 cm]
Product Width 3.0 in [75.0 mm]
Product Height 1.7 in [43.0 mm]
Power Power Source AC Adapter Included
Output Voltage 7.5 AC
Output Current 0.8A
Power Consumption (In Watts) 6
What's in the Box 1 - Included in Package 2x2 VGA Matrix Switch
Power Adapter
Instruction Manual

Accessories

MXT101MMHQ

6 ft Coax High Resolution Monitor VGA Video Cable - HD15 to HD15 M/M

Connect your VGA monitor with the highest quality connection available

Your price
$317.83 MXN
VAT included in the price
MXT101MMHQ10

10 ft Coax High Resolution VGA Monitor Cable HD15 M/M

Connect your VGA monitor with the highest quality connection available

Your price
$502.27 MXN
VAT included in the price
MXT105MMHQ

15 ft Coax High Resolution Monitor VGA Cable - HD15 M/M

Connect your VGA monitor with the highest quality connection available

Your price
$686.71 MXN
VAT included in the price
ST121UTP

VGA Video Extender over Cat5 (ST121 Series)

Extend and distribute a VGA signal to 2 local, and 2 remote displays over Cat5 or better cabling

Your price
$3,976.47 MXN
VAT included in the price

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Manual(s):

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions

Troubleshooting

When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video switch

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI switch, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video switch from your setup and test to make sure that the video source and video destination work together without the video switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, switch, and destination all need to support the resolution that you are using.

Before You Buy

This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

Target connection First conversion Second conversion (if required)
DVI-D VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.
DVI-I VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. N/A
HDMI

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

N/A
DisplayPort VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.

DVI-I and DVI-D

When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  

Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.

This device has a VGA input port.  If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.

Source connection

Conversion

DVI-I

DVI-I to VGA: https://www.startech.com/DVIVGAMFBK.

DVI-D

DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA.

HDMI

HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.

DisplayPort

DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/.

DVI-I and DVI-D

When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  Some DVI-I connections only support DVI-D signaling.  In this case, you must use a DVI-D to VGA converter.

Compliance and safety

Compliance letters

  • RoHS
    • Language: English
  • WEEE
    • Language: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Feedback Back to top