Product ID: SAT2M2NGFF25
Vastly increase system performance by replacing your 2.5” SATA hard drive with an M.2 solid state drive, using the SAT2M2NGFF25 M.2 SSD to SATA adapter.
The M.2 to SATA adapter features an enclosed housing that adds protection to your NGFF (Next Generation Form Factor) SSD. The added protection gives you the peace of mind to confidently use your M.2 drive in applications that require an added level of durability such as hot-swap drive bays, or external SATA docking stations.
Using an M.2 SSD in place of a platter drive better utilizes the full potential of your SATA III controller, by reducing your data transfer bottleneck with file transfer speeds up to 6 Gbps -- an ideal solution for further increasing the performance of a HyperDuo array.
For wide compatibility with all of the common M.2 solid state drives, the SAT2M2NGFF25 supports multiple drive heights including: 2230, 2242, 2260, 2280.
The SAT2M2NGFF25 is backed by a StarTech.com 2-year warranty, and lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Drive Connectors||M.2 (SATA, B-Key, NGFF)|
|1 - Host Connectors||SATA Data & Power Combo (7+15 pin)|
|Environmental||Operating Temperature||0°C to 50°C (32°F to 122°F)|
|Storage Temperature||-10°C to 85°C (14°F to 185°F)|
|Humidity||5% to 95% RH|
|Number of Drives||1|
|Compatible Drive Types||M.2 (SATA, B-Key, NGFF)|
|Supported Drive Height(s)||2230|
|Packaging Information||Package Height||1.3 in [32 mm]|
|Package Length||5.2 in [13.1 cm]|
|Shipping (Package) Weight||4.1 oz [116 g]|
|Package Width||6.4 in [16.2 cm]|
|Performance||Maximum Data Transfer Rate||6 Gbps|
|Type and Rate||SATA III (6 Gbps)|
|Hardware Raid Supported||No|
|Hot Swap Capability||No|
|General Specifications||Not compatible with M.2 NVMe or AHCI PCI-Express SSDs|
|Physical Characteristics||Weight of Product||1.9 oz [54 g]|
|Material||Aluminum and Plastic|
|Product Length||3.9 in [98 mm]|
|Product Width||2.7 in [68 mm]|
|Product Height||0.3 in [8 mm]|
|Software||OS Compatibility||OS independent; No software or drivers required|
|What's in the Box||1 - Included in Package||M.2 NGFF SSD to 2.5" SATA Adapter|
|SSD mounting kit|
|Housing mounting kit|
|Mini screw driver|
Latching SATA connectors, for securely fastened hard drive installations.
Mount two 2.5in SATA SSDs/HDDs into a single 3.5in drive bay
Mount a 2.5in SATA hard drive to any computer with an available 3.5in bay
Connect an IDE hard drive to a Serial ATA power connector
Although M.2 SSDs come in similar form factors, only an M.2 SATA drive with an NGFF B key will operate with this device. M.2 drives that are PCIe or have a different key position are not compatible with this device.
This device can adapt an M.2 SATA drive to standard SATA connections, which is not possible for a PCIe based M.2 drive. The key type refers to the connector type on the M.2 SATA drive. B key can be M.2 PCIe x2 or SATA, so it is important that you check the specifications of the drive to see if it supports SATA.