Product ID: SAT32MSAT257
Vastly increase system performance by adding the speed of an mSATA SSD in any 2.5" SATA application, with the SAT32MSAT257 mSATA to SATA adapter.
Utilize the full potential of your SATA III controller, with an mSATA SSD reducing your DATA transfer bottle neck with file transfer speeds up to 6 Gbps. mSATA SSDs also save you money by reducing your power consumption over regular platter drives.
Help protect the health of your drive with an open frame design ensuring maximum heat dissipation.
The SAT32MSAT257 is backed by a StarTech.com 2-year warranty, and lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Drive Connectors||mSATA (52 pin, Mini SATA)|
|1 - Host Connectors||SATA Data & Power Combo (7+15 pin)|
|Environmental||Operating Temperature||－25℃ to ＋80℃ (- -13°F to 176°F)|
|Storage Temperature||-40°C to 85°C (-40°F to 185°F)|
|Humidity||20% to 80%|
|Number of Drives||1|
|Compatible Drive Types||mSATA (Mini SATA)|
|Packaging Information||Package Height||0.1 in [3 mm]|
|Package Length||5.7 in [14.4 cm]|
|Shipping (Package) Weight||1.2 oz [33 g]|
|Package Width||6.9 in [17.4 cm]|
|Performance||Maximum Data Transfer Rate||6 Gbps|
|Type and Rate||SATA III (6 Gbps)|
|Hardware Raid Supported||No|
|Hot Swap Capability||No|
|Physical Characteristics||Weight of Product||4.0 oz [114 g]|
|Product Length||3.9 in [10 cm]|
|Product Width||2.8 in [70 mm]|
|Product Height||0.3 in [0.7 cm]|
|Software||OS Compatibility||OS independent; No software or drivers required|
|What's in the Box||1 - Included in Package||mSATA SSD to 2.5in SATA SSD Converter|
|Mounting kit (2x drive mounting screws, 4x adapter mounting screws)|
Latching SATA connectors, for securely fastened hard drive installations.
Mount a 2.5in SATA hard drive to any computer with an available 3.5in bay
Mount two 2.5in SATA SSDs/HDDs into a single 3.5in drive bay
Connect an IDE hard drive to a Serial ATA power connector
To confirm that the Mac OS detects your USB device, complete the following:
You may need to refresh the System Information page after you plug in your device. To do so, press Command + R with the System Information page open.
Your USB device is listed according to the name of the chipset. To determine the name of the chipset of your USB device, navigate to www.StarTech.com and look on the Technical Specifications tab for your product.