Component / VGA Video and Audio to HDMI Converter - PC to HDMI - 1920x1200
Connect your VGA or Component video source to an HDMI® display
Product ID: VGA2HD2
- Supports YPbPr (component input) and HD15 PC VGA input
- Supports input resolutions up to 1080p (HDTV) and 1920 x 1200 (PC)
- Includes Component to VGA adapter cable
The VGA2HD2 Component/VGA to HDMI® Video Converter offers seamless conversion from an analog VGA or Component video source, such as a Computer, DVR, or DVD player, to a digital HDMI® output.
The converter helps reduce equipment costs by eliminating the need to upgrade individual analog components, by offering a solution that converts an analog video source (RGB/YPbPr) for use with a digital HDMI® display.
This versatile analog-digital converter not only supports resolutions up to 1920x1200 including high-definition 1080p, but also enables you to convert and combine an analog RCA audio source into its digital HDMI® output signal.
The VGA2HD2 Component/VGA to HDMI converter is backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Eliminates equipment costs by providing an alternative to the device upgrades required for compatibility between a VGA or Component video output and an HD display
- Ensures durability, with a rugged metal enclosure
- Delivers worry-free performance, with a 2-year warranty and free lifetime technical support
Converting an analog video output signal from a computer for use with an HDTV
Removing the clutter at the back of a monitor/display, by replacing multiple cables with a single HDMI® cable
Connect a laptop computer to a boardroom projector or display, for on-screen presentations
|Ingram Micro España||V932219|
|Active or Passive Adapter||Active|
|AV Input||Component YCbCr|
|Supported Resolutions||Maximum of 1080p for HD Input, and 1920x1200 for PC input|
|Wide Screen Supported||Yes|
|Connector A||1 - Component Video (3 x RCA) Male Input|
|1 - Stereo Audio (2 x RCA) Female Input|
|1 - VGA (15 pin, High Density D-Sub) Female Input|
|Connector B||1 - HDMI (19 pin) Female Output|
|Special Notes / Requirements|
|System and Cable Requirements||HDMI® M/M Cable (Destination)
VGA M/M Cable (If using VGA as source)
|Center Tip Polarity||Positive|
|Input Voltage||100 ~ 240 AC|
|Output Voltage||5 DC|
|Power Consumption (In Watts)||6|
|Power Source||AC Adapter Included|
|Operating Temperature||0°C to 40°C (32°F to 104°F)|
|Storage Temperature||-20°C to 60°C (4°F to 140°F)|
|Product Height||30 mm [1.2 in]|
|Product Length||110 mm [4.3 in]|
|Product Weight||188 g [6.6 oz]|
|Product Width||78 mm [3.1 in]|
|Shipping (Package) Weight||540 g [19.1 oz]|
|What's in the Box|
|Included in Package||1 - PC/HD to HDMI Converter with Audio|
|1 - VGA to Component (RCA) Breakout Cable|
|1 - Universal Power Adapter (US/UK/EU/AUS)|
Connect an HDMI®-enabled output device to a DVI-D display, or a DVI-D output device to an HDMI-capable display
Connect your Computer or Audio Player to an RCA Audio Device
Frequently Asked Questions
Before You Buy
Unfortunately no, this device has an intended source and an intended destination. Refer to the title of the webpage for this order.
This is an active video signal converter.
A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.
An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.
For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).
The phase button changes the pixel sampling time.
There are 32 discrete phase adjustments, and each time you press the button, it adjusts the pixel sampling time a little bit. If you press the button continuously, it might get better or worse.
The VGA2HD2 keeps the last clock phase it was set to, even if it is turned off.
When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
To test your setup components, try the following:
Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.
Try the following:
- Check that the monitor’s video port works with another source.
- Check that the cables between the source and the destination work with other equipment.
- Check whether the video adapter works with another source and another destination.
The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue. You may need to connect another monitor or restart the computer or source to accomplish this.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.