High Resolution VGA to Composite (RCA) or S-Video Converter - PC to TV
Connect a PC with VGA output to a composite or S-Video TV
Product ID: VGA2VID
- High resolution inputs from your PC up to 1600x1200
- Provides output in both composite and S-Video formats
- Supports NTSC and PAL compatible displays
- Image underscan and overscan selectable switch
This High Resolution VGA to Composite or S-Video Converter is a simple hardware solution that allows you to convert a VGA/PC video signal into a Composite or S-Video signal for use with a CRT or flat panel display.
The ideal solution for synchronizing monitors with television displays etc., the VGA to Composite/S-Video Converter offers selectable NTSC or PAL format operating modes to ensure compatibility with virtually any configuration.
- An inexpensive way to increase the size of a computer display
- Displays computer screen images on your TV
- Great for boardroom meetings, tradeshows, lectures, and CRT digital signage solutions
- Use your TV to display computer presentations, surfing the Internet, playing video games and more
The StarTech.com Advantage
- Pure hardware design provides an easy to use and install solution
- Automatic detection the scan rate and resolution of the incoming graphic signals without the use of software saves time and hassle
- With support for high resolutions and automatic scaling there is no need to lower resolution settings on your PC
Ingram Micro España
|Active or Passive Adapter||Active|
|Chipset ID||Mstar - MST3541-LF
Analog Devices - ADV 7610
|Supported Resolutions||PC Input - Up to 1600x1200 @ 60Hz Output - 640x480|
|Connector A||1 - VGA (15 pin, High Density D-Sub) Female Input|
|Connector B||1 - Composite Video (1 x RCA) Female Output|
|1 - S-Video (4 pin, Mini-DIN) Female Output|
|Center Tip Polarity||Positive|
|Input Current||0.6 A|
|Input Voltage||100 - 240 AC|
|Output Current||2.6 A|
|Output Voltage||5 DC|
|Power Consumption (In Watts)||13|
|Power Source||AC Adapter Included|
|Operating Temperature||0°C to 70°C (32°F to 158°F)|
|Product Height||1.9 cm [0.7 in]|
|Product Length||10 cm [3.9 in]|
|Product Width||64 mm [2.5 in]|
|Weight of Product||102 g [3.6 oz]|
|Package Height||60 mm [2.4 in]|
|Package Length||11.8 cm [4.6 in]|
|Package Width||20.9 cm [8.2 in]|
|Shipping (Package) Weight||393 g [13.9 oz]|
|What's in the Box|
|Included in Package||1 - VGA to Composite/S-Video Converter|
|1 - Universal Power Adapter (US/UK/EU/AUS)|
|1 - User Manual|
Convert a VGA signal from a laptop or desktop to HDMI (USB-Powered)
Connect your VGA or Component video source to an HDMI® display
Convert and scale your legacy VGA source into an HDMI video signal, for compatibility with newer displays
Switch between DisplayPort, VGA or two HDMI source devices on one display, with automatic and priority switching
Install this AV connectivity panel into any boardroom table, and connect the screen from any laptop with HDMI, VGA or mDP to an HDMI display
Frequently Asked Questions
Before You Buy
Unfortunately no, this device has an intended source and an intended destination. Refer to the title of the webpage for this order.
This is an active video signal converter.
A passive video signal converter changes the type of connection that is being used but does not change the signal that passes through the converter. Because the video signal is not modified, passive converters tend to be smaller, simpler, and less expensive than active video signal converters. Examples of passive converters include DVI-I to VGA, HDMI to DVI, and DisplayPort to Mini-DisplayPort converters.
An active video signal converter modifies both the type of connection that is being used and the signal that passes through the converter. Because this type of conversion can be complex, active converters tend to be larger than passive video signal converters and sometimes require additional power. Examples of active converters include DVI-D to VGA, HDMI to DisplayPort, and VGA to HDMI converters.
For more information about passive and active DisplayPort video signal converters, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.
For more information about which type of video signal converter you should use when you convert video signals with an MST hub, refer to the following FAQ: https://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).
When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
To test your setup components, try the following:
Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.
Try the following:
- Check that the monitor’s video port works with another source.
- Check that the cables between the source and the destination work with other equipment.
- Check whether the video adapter works with another source and another destination.
The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue. You may need to connect another monitor or restart the computer or source to accomplish this.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.