Mini DisplayPort to VGA Adapter with Audio
Connect your Mac or PC to a VGA display and a discrete 3.5mm audio output
Product ID: MDP2VGAA
- Group your VGA and audio ports together, to ensure they're all accessible when you need them
- Substitute a damaged or blocked audio port by connecting your audio directly through the adapter
- Provide crystal-clear picture quality with support for high-definition video resolutions up to 1920x1200 or 1080p
- Maximum portability with a small footprint and lightweight design
This unique Mini DisplayPort™ to VGA adapter is equipped with a built-in audio port which lets you connect Mini DisplayPort equipped devices, such as a Microsoft® Surface™ Pro devices or MacBook Air laptop, to a VGA display or projector with audio.
Share your presentations and videos
Because most boardrooms are set up differently, the length of cables available in each room vary. Not all laptops have the Mini DisplayPort (mDP) and audio ports positioned on the same side, which can become awkward when you’re trying to share your presentations. It can also mean that some ports may be just out of reach during a meeting.
This convenient adapter positions your audio and video ports on the same side of your laptop, to ensure that all of the ports you need are accessible when you need them.
Substitute for a damaged audio port
If the audio port on your mobile device is damaged or blocked by other connections, this convenient adapter guarantees that you’ll always have all of the ports you need for every presentation. By connecting audio to your laptop through the adapter, you can be prepared for any situation.
In order to use the audio function of the adapter you need to power the adapter through a USB port on your laptop, or through a charge port on a USB grommet. Simply plug a Micro USB cable from the adapter into the USB port and audio will be available when you deliver your presentation.
Create a clutter-free environment
The adapter can also be used for connecting your laptop or desktop computer to your monitor and speakers. The adapter and connected cables can be placed nicely at the back of your monitor to create a tidy setup between all of your devices.
Arrive prepared, wherever you go
This mDP to VGA adapter is extremely portable with a lightweight, small-footprint design. It’s the perfect accessory to carry with your mobile devices, fitting easily into your laptop bag or carrying case. Its ultra-portable design makes the adapter ideal for BYOD (Bring Your Own Device) applications at the office.
It also enables you to arrive prepared when you’re presenting to a potential client, teaching off-site, or traveling to a meet with a customer.
The adapter is compatible with Intel® Thunderbolt™, when connected directly to a supporting DisplayPort over Thunderbolt™ I/O port, and supports resolutions up to 1920x1200 (WUXGA).
The MDP2VGAA is backed by a 3-year StarTech.com warranty and free lifetime technical support.
- Connect a VGA monitor or projector to a Mini DisplayPort equipped device, while providing audio for your video presentations
- Connect a VGA display to your mDP laptop to use as a secondary monitor
- Keep the adapter with you while traveling, to connect to any VGA monitor or projector you come across
- Walk into any boardroom with your Mini DisplayPort laptop or tablet and be ready to present
Ingram Micro España
|Active or Passive Adapter||Active|
|AV Input||Mini DisplayPort - 1.2|
|Audio Specifications||VGA - No Audio Support|
|Maximum Analog Resolutions||1920x1200 / 1080p (output)|
|Maximum Digital Resolutions||1920x1200 / 1080p (input)|
|Wide Screen Supported||Yes|
|Connector A||1 - Mini-DisplayPort (20 pin) Male Input|
|Connector B||1 - VGA (15 pin, High Density D-Sub) Female Output|
|1 - 3.5 mm Mini-Jack (3 Position) Female Output|
|Connector Type(s)||1 - USB Micro-B (5 pin) Female Input|
|Operating Temperature||0°C to 70°C (32°F to 158°F)|
|Storage Temperature||-10°C to 55°C (14°F to 131°F)|
|Cable Length||18.4 cm [7.2 in]|
|Product Height||1.6 cm [0.6 in]|
|Product Length||30.5 cm [12 in]|
|Product Width||44 mm [1.7 in]|
|Weight of Product||44.4 g [1.6 oz]|
|Package Height||20 mm [0.8 in]|
|Package Length||22 cm [8.7 in]|
|Package Width||20 mm [0.8 in]|
|Shipping (Package) Weight||58 g [2 oz]|
|What's in the Box|
|Included in Package||1 - Mini DisplayPort to VGA adapter|
|1 - 0.25m Micro USB cable|
Connect a VGA display to a Mini-DisplayPort®-equipped PC or Mac® computer
Connect a DVI display to a Mini-DisplayPort®-equipped PC or Mac® computer
Connect an HDMI®-capable display to a Mini-DisplayPort®-equipped PC or Mac® computer
Connect a VGA monitor to a DisplayPort-equipped PC
Charge or sync micro USB mobile devices from a standard USB port on your desktop or mobile computer
Connect your Computer or Audio Player to an RCA Audio Device
Frequently Asked Questions
Before You Buy
When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.
If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.
Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.
Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.
Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.
If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.
Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters. For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).
Note: This issue does not apply to the Surface Pro 3 Docking Station.
To arrange extended displays on Windows 10, complete the following.
- Press the Windows key+R, type desk.cpl, and press Enter.
- Under the ‘Multiple Displays’ selection, select ‘Extend Desktop To This Display.’
- Press ‘Identify’ to determine what number each display is assigned to.
- Drag and drop each display accordingly to the physical layout on your desk.
- Click the Apply button.
To arrange extended displays on macOS, complete the following.
- Navigate to the Apple Menu > System Preferences, click Displays, then click Arrangement.
- Make sure that the ‘Mirror Displays’ checkbox is not selected.
- Click on each display to determine what number each display is assigned to.
- Drag and drop each display accordingly to the physical layout on your desk.
- If using a display with VGA input, use the On-Screen Display menu to perform an auto-adjust of the image.
- Adjust the resolution to be the exact resolution and refresh rate recommended by the display manufacturer.
Check that the device is not being used in reverse.
The display does not support the resolution set within Display Settings. Adjust the resolution to be the exact resolution and refresh rate recommended by the display manufacturer.
If a DisplayPort converter with audio is not passing sound from the source to the destination, complete the following:
- Make sure that the DisplayPort connection on the video card is the default audio playback device.
- Make sure that the video card has the DisplayPort audio codec installed. If not, visit the video card manufacturer's website to find out how to update the video card driver.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.