StarTech.com

Gigabit 850nm Multi Mode SFP Fiber Optical Transceiver - LC 550m

Add, replace or upgrade SFP modules on gigabit fiber equipment

Product ID: SFPSXMM

  • 1.25Gbps IEEE 802.3z 1000BASE-SX Compliant
  • Complies with SFP Multi-Source Agreements standards (MSA)
  • Equipped with a 850nm VCSEL Laser with Class 1 laser safety standards IEC825 compliance
View More
  • Duplex LC receptacle connector
  • Complies with 1.0625Gbps Fiber Channel FC-PI 100-M5-SN-I and FC-PI 100-M6-SN-I
  • Serial ID functionality support
  • Fully Hot Pluggable
95,99 € EUR exc VAT
116,15 € EUR inc VAT

Overview

The SFPSXMM Gigabit 850nm Multi Mode SFP Fiber Optical Transceiver - LC 550m is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to increase performance and connectivity of your fiber-connected network devices.

Using a short wavelength (850nm) VCSEL laser diode, enabling a maximum cable distance of 550m (0.3 miles) over multi mode fiber, this Small Form Factor Pluggable (SFP) Gigabit Multi Mode module can be installed into any fiber networking devices with an MSA compliant SFP port, providing a simple solution to upgrade existing network devices to connect to remote locations using LC terminated multimode fiber.

Delivering convenience and scalability, the optical transceiver allows you to install the multimode LC module without interrupting network traffic or requiring a device reboot.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

The StarTech.com Advantage

  • Fully compliant with MSA standards, this hot pluggable module can be installed into any networking device with an MSA compliant port
  • Equipped with an industry standard multimode LC interface, this module can extend your network connectivity up to 550m away

Applications

Perfect for network extension and fiber backbones

Replacing defective or damaged SFPs in MSA compliant equipment

Use in Multimode fiber installations

Expand your network to remote segments over fiber

Technical Specifications

Warranty Information
Warranty 2 Years
Hardware
Compatible Brand MSA Compliant
Industry Standards IEEE 802.3z 1000BASE-SX
Performance
Compatible Networks 1000 Mbps (1 Gbps)
DDM No
Fiber Operating Mode Full-Duplex
Max Transfer Distance 550 m (1804 ft)
Maximum Data Transfer Rate 1.25 Gbps
MTBF 78,286 hours
Type Multi Mode
Wavelength 850nm
Connector(s)
Local Unit Connectors 1 - Fiber Optic LC Duplex Female
Environmental
Humidity 5 to 95% RH
Operating Temperature 0°C to 70°C (32°F to 158°F)
Storage Temperature -40°C to 85°C (-40°F to 85°F)
Physical Characteristics
Product Height 9 mm [0.4 in]
Product Length 55 mm [2.2 in]
Product Weight 0 kg [0 lb]
Product Width 13 mm [0.5 in]
Packaging Information
Shipping (Package) Weight 0 kg [0.1 lb]
What's in the Box
Included in Package 1 - SFP Multimode LC Transceiver

Certifications

Accessories

Product Support

Frequently Asked Questions

Before You Buy

SFP fiber transceivers (mini-GBIC) are specific to applications and therefore, you need to select the correct fiber transceiver for your application. StarTech.com offers a few types of fiber transceivers: Cisco®, Cisco Meraki®, HP®, and Juniper® compatible, as well as standard gigabit SFP converters. Although the transceivers may be referred to as GBIC or mini-GBIC, the correct terminology for the device is small form-factor pluggable transceiver or SFP . StarTech.com does not carry GBIC converters.

If your device is not a Cisco device, it can still use Cisco compatible SFPs. Cisco SFPs are specifically coded to be compatible with Cisco devices. A standard SFP will not work in a Cisco device.

StarTech.com offers two different output connector types for SFPs: RJ-45 and fiber.

No special requirements are necessary to use RJ-45 SFPs. However, if you use fiber transceivers, the following items need to be the same as the interconnecting equipment:

  • The connector type, such as LC, SC, or ST.

  • The mode (single mode or multi mode).

  • The wavelength, such as 850 nm, 1310 nm, or 1550 nm.

  • The DDM support.

  • The speed, such as 10Gbps.

Note: The properties listed above cannot be converted or changed by a cable, excluding the connector type.