StarTech.com

6in 4 Pin to 8 Pin EPS Power Adapter with LP4 - F/M

Connect your non-EPS power supply to an EPS motherboard.

Product ID: EPS48ADAP

  • Provides 6 inch cable length reduces cable clutter in the case
  • Easy to use and install
3,99 € EUR exc VAT
4,79 € EUR inc VAT

Overview

This reliable EPS adapter combines a P4 power supply connection with an LP4 power supply connection, into a single 8-pin EPS motherboard connector, allowing you to use a non-EPS power supply with a motherboard that requires an EPS power connection.

The LP4 + P4 PSU to EPS adapter is backed by StarTech.com's Lifetime Warranty.

The StarTech.com Advantage

  • Provides an economical way to upgrade a system without having to replace an older power supply
  • Backed by StarTech.com's Lifetime Warranty

Applications

Converts standard P4 and LP4 power supply connection into an 8 pin EPS motherboard connector

Use a non-EPS power supply with a motherboard that requires an EPS power connection

Technical Specifications

Warranty Information
Warranty Lifetime
Connector(s)
Connector A 1 - ATX 12V P4 Power (4 pin, v 2.x) Female
1 - LP4 (4 pin, Molex Large Drive Power) Male
Connector B 1 - ATX 12V EPS Power (8 pin) Male
Physical Characteristics
Cable Length 152.4 mm [6 in]
Product Length 152.4 mm [6 in]
Product Weight 15 g [0.5 oz]
Packaging Information
Shipping (Package) Weight 0 kg [0.1 lb]
What's in the Box
Included in Package 1 - 6in 4 Pin to 8 Pin EPS Power Adapter with LP4 - F/M

Certifications

Product Support

Frequently Asked Questions

Troubleshooting

When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Power supply

  • Computer part

  • Power cable

To test your setup components, try the following:

  • Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.

  • Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cable, it is recommended that you do the following:

  • Make sure that the cable is firmly inserted into both ends.

  • The polarity (usually indicated by the color of the cables) matches.

  • No pins are bent or missing on the power supply cable or header, or the computer part.