18in SAS 29 Pin to SATA Cable with LP4 Power
Connect a SAS hard drive to a SATA controller.
Product ID: SAS729PW18
Ideal for use with SAS external storage devices, Host Bus Adapters and RAID controllers, this high quality 18in SAS (29-Pin) to SATA Cable delivers both power (LP4) and data connectivity.
This high quality SAS-SATA cable is backed by StarTech.com's Lifetime Warranty.
*Please note that the SATA controller must support SAS drives.
The StarTech.com Advantage
- Allows you to connect a SAS hard drive to a SATA controller that supports SAS drives
- One cable provides both power and data connections
- Backed by StarTech.com lifetime warranty
Ingram Micro France
Tech Data - France
|Connector A||1 - SATA (7 pin, Data) Receptacle|
|Connector B||1 - LP4 (4 pin; Molex-type Large Drive Power) Male|
|1 - SFF-8482 (29 pin, Data & Power, Internal SAS) Receptacle|
|Cable Length||457.2 mm [18 in]|
|Product Length||457.2 mm [18 in]|
|Product Weight||30 g [1.1 oz]|
|Shipping (Package) Weight||35 g [1.2 oz]|
|What's in the Box|
|Included in Package||1 - 18in SAS 29 Pin to SATA Cable with LP4 Power|
Frequently Asked Questions
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Hard disk drive
Hard drive controller (for example, motherboard)
To test your setup components, try the following:
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.