0.3m SATA Extension Cable
Extend SATA Data Connections by up to 30cm (12in)
Product ID: SATAEXT30CM
- Offers 30 centimeters (12in) in length for greater flexibility
- Compliant with Serial ATA III Specifications
- Supports data transfer rates up to 6 Gbps
- Specially designed to improve system airflow and route ability
Not Available
May be in stock with partners
From a Partner
Support
Overview
The SATAEXT30CM 0.3-meter (30cm) SATA Data Extension Cable enables you to extend the reach between internal SATA drive connections by up to 30 cm (11.81 in).
The extension simplifies drive installation by overcoming typical connection limitations, and it reduces the risk of damage to the drive or motherboard SATA connectors by eliminating the need to strain or stretch the cable in order to make the necessary connection.
Constructed of only high quality materials and expertly designed for reliability and peak performance, the SATAEXT30CM cable is backed by StarTech.com's Lifetime Warranty.
The StarTech.com Advantage
- Eliminates the need to bend or strain the cable to account for a lack of space
- Backed by a StarTech.com lifetime warranty
Applications
Allows flexibility in cable placement when building or upgrading systems
Extend SATA Data connections with a cable long enough to make the necessary connection but short enough to prevent excess cable from creating unnecessary clutter
For use in servers and storage subsystems
Mini tower computers
Technical Specifications
| Product Numbers | ||
|---|---|---|
| Ingram Micro France | V931963 | |
| UPC Code | 065030846813 | |
| Warranty Information | ||
|---|---|---|
| Warranty | Lifetime | |
| Hardware | ||
| Cable Jacket Type | PVC - Polyvinyl Chloride | |
| Performance | ||
| Type and Rate | SATA III (6 Gbps) | |
| Connector(s) | ||
| Connector A | 1 - SATA (7 pin, Data) Plug | |
| Connector B | 1 - SATA (7 pin, Data) Receptacle | |
| Physical Characteristics | ||
| Cable Length | 0.3 m [1 ft] | |
| Color | Red | |
| Product Length | 0.3 m [1 ft] | |
| Product Weight | 15 g [0.5 oz] | |
| Wire Gauge | 26 AWG | |
| Packaging Information | ||
| Package Quantity | 1 | |
| Shipping (Package) Weight | 16 g [0.6 oz] | |
| What's in the Box | ||
| Included in Package | 1 - 30 cm SATA Data Extension Cable | |
Certifications
Related Products
12in 22 Pin SATA Power and Data Extension Cable
Extend SATA Power and Data Connections by up to 1ft
Product Support
Drivers & Downloads
Compliance Letter(s):
Data Sheet(s)
- SATAEXT30CM_Datasheet.pdf
English
Frequently Asked Questions
Troubleshooting
When you troubleshoot issues with a SATA cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
-
Hard disk drive
-
Hard drive controller (for example, motherboard)
-
SATA cable
To test your setup components, try the following:
-
Use the hard disk drive, hard drive controller, and SATA cable in another setup to see if the problem is with the components or the setup.
-
Use a different hard disk drive, hard drive controller, and SATA cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test the hard disk drive, hard drive controller, and SATA cable, it is recommended that you do the following:
-
Make sure that the hard drive is spinning without the SATA cable attached. The power cable should make the drive spin if it is a mechanical drive and not a solid state drive.
-
If your operating system is not detecting the hard disk drive, make sure that the drive is formatted with a partition (for example, NTFS or FAT32). If you are using a computer running a version of Windows, a drive letter must also be assigned to the hard disk drive.
For more information about how to initialize a drive, refer to the following FAQ: https://www.startech.com/support/faqs/technical-support?topic=hard-drives#initialize-hard-drives.
Follow us on Twitter | Find us on Google+