Gigabit 850nm Multi Mode SFP Fiber Optical Transceiver - LC 550m
Add, replace or upgrade SFP modules on gigabit fiber equipment
Product ID: SFPSXMM
- 1.25Gbps IEEE 802.3z 1000BASE-SX Compliant
- Complies with SFP Multi-Source Agreements standards (MSA)
- Equipped with a 850nm VCSEL Laser with Class 1 laser safety standards IEC825 compliance
- Duplex LC receptacle connector
- Complies with 1.0625Gbps Fiber Channel FC-PI 100-M5-SN-I and FC-PI 100-M6-SN-I
- Serial ID functionality support
- Fully Hot Pluggable
Not Available
May be in stock with partners
From a Partner
Support
Overview
The SFPSXMM Gigabit 850nm Multi Mode SFP Fiber Optical Transceiver - LC 550m is built to comply with MSA (Multi-Sourcing Agreement) standards to offer a cost-effective way to increase performance and connectivity of your fiber-connected network devices.
Using a short wavelength (850nm) VCSEL laser diode, enabling a maximum cable distance of 550m (0.3 miles) over multi mode fiber, this Small Form Factor Pluggable (SFP) Gigabit Multi Mode module can be installed into any fiber networking devices with an MSA compliant SFP port, providing a simple solution to upgrade existing network devices to connect to remote locations using LC terminated multimode fiber.
Delivering convenience and scalability, the optical transceiver allows you to install the multimode LC module without interrupting network traffic or requiring a device reboot.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Fully compliant with MSA standards, this hot pluggable module can be installed into any networking device with an MSA compliant port
- Equipped with an industry standard multimode LC interface, this module can extend your network connectivity up to 550m away
Applications
Perfect for network extension and fiber backbones
Replacing defective or damaged SFPs in MSA compliant equipment
Use in Multimode fiber installations
Expand your network to remote segments over fiber
Technical Specifications
| Product Numbers | ||
|---|---|---|
| Ingram Micro France | V930834 | |
| UPC Code | 065030834940 | |
| Warranty Information | ||
|---|---|---|
| Warranty | 2 Years | |
| Hardware | ||
| Compatible Brand | MSA Compliant | |
| Industry Standards | IEEE 802.3z 1000BASE-SX | |
| Performance | ||
| Compatible Networks | 1000 Mbps (1 Gbps) | |
| DDM | No | |
| Fiber Operating Mode | Full-Duplex | |
| Fiber Type | Multi Mode | |
| Max Transfer Distance | 550 m (1804 ft) | |
| Maximum Data Transfer Rate | 1.25 Gbps | |
| MTBF | 78,286 hours | |
| Wavelength | 850nm | |
| Connector(s) | ||
| Local Unit Connectors | 1 - Fiber Optic LC Duplex Female | |
| Environmental | ||
| Humidity | 5 to 95% RH | |
| Operating Temperature | 0°C to 70°C (32°F to 158°F) | |
| Storage Temperature | -40°C to 85°C (-40°F to 85°F) | |
| Physical Characteristics | ||
| Product Height | 9 mm [0.4 in] | |
| Product Length | 55 mm [2.2 in] | |
| Product Weight | 0 kg [0 lb] | |
| Product Width | 13 mm [0.5 in] | |
| Packaging Information | ||
| Shipping (Package) Weight | 0 kg [0.1 lb] | |
| What's in the Box | ||
| Included in Package | 1 - SFP Multimode LC Transceiver | |
Certifications
Accessories
PCI Express Gigabit Ethernet Fiber Network Card w/ Open SFP - PCIe SFP Network Card Adapter NIC
Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice
10 Port L2 Managed Gigabit Ethernet Switch with 2 Open SFP Slots - Rack Mountable
Scale your network and connect up to 10 different Gigabit Ethernet devices, including 8x RJ45 + 2x fiber optic connections using the SFPs of your choice
8-Port PoE+ Gigabit Ethernet Switch plus 2 SFP Connections - Managed - Wall Mount with Front Access
Add up to 10 different GbE devices to your network, using 8 RJ45 (PoE+) and 2 fiber-optic connections, with intelligent Layer 2 management
8-Port Gigabit Ethernet Switch with 2 SFP Connections - Managed - Wall Mount with Front Access
Add up to 10 GbE devices to your network, using 8 RJ45 and 2 fiber-optic connections, with intelligent Layer 2 management support
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 1 m
Connect fiber network devices for high-speed transfers with LSZH rated cable
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 2 m
Connect fiber network devices for high-speed transfers with LSZH rated cable
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 3 m
Connect fiber network devices for high-speed transfers with LSZH rated cable
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 5 m
Connect fiber network devices for high-speed transfers with LSZH rated cable
Fiber Optic Cable - Multimode Duplex 50/125 - LSZH - LC/LC - 10 m
Connect fiber network devices for high-speed transfers with LSZH rated cable
Gigabit Ethernet Fiber Media Converter with Open SFP Slot
Convert and extend different networks over a Gigabit fiber cable connection using the SFP of your choice
Product Support
Drivers & Downloads
Frequently Asked Questions
Before You Buy
SFP fiber transceivers (mini-GBIC) are specific to applications and therefore, you need to select the correct fiber transceiver for your application. StarTech.com offers a few types of fiber transceivers: Cisco®, Cisco Meraki®, HP®, and Juniper® compatible, as well as standard gigabit SFP converters. Although the transceivers may be referred to as GBIC or mini-GBIC, the correct terminology for the device is small form-factor pluggable transceiver or SFP . StarTech.com does not carry GBIC converters.
If your device is not a Cisco device, it can still use Cisco compatible SFPs. Cisco SFPs are specifically coded to be compatible with Cisco devices. A standard SFP will not work in a Cisco device.
StarTech.com offers two different output connector types for SFPs: RJ-45 and fiber.
No special requirements are necessary to use RJ-45 SFPs. However, if you use fiber transceivers, the following items need to be the same as the interconnecting equipment:
-
The connector type, such as LC, SC, or ST.
-
The mode (single mode or multi mode).
-
The wavelength, such as 850 nm, 1310 nm, or 1550 nm.
-
The DDM support.
-
The speed, such as 10Gbps.
Note: The properties listed above cannot be converted or changed by a cable, excluding the connector type.
Follow us on Twitter | Find us on Google+