Can’t find the product you need? Our support team is standing by to help you find the right solution or recommend replacement products. Click here for live chat.
StarTech.com

1 Port USB Wireless N Network Print Server with 10/100 Mbps Ethernet Port - 802.11 b/g/n

Share a standard USB printer with multiple users simultaneously over a wireless network

Product ID: PM1115UW

  • Compliant with 802.11b/g/n wireless networks, with data rates up to 150 Mbps
  • USB 2.0 support
  • Optional 10/100 Mbps RJ-45 LAN Port
View More
  • Compact, lightweight design with an internal antenna
  • Supports SNMP for remote printer management - works with most SNMP based applications
  • Easy-to-use web interface or Windows-based configuration and setup
  • Built-in multi-function button for resetting the device, loading factory defaults or printing a self-test page
  • Built-in WPS (WiFi Protected Setup) button for simple connection to a wireless network
  • Supports DHCP Server/Client protocols, and UPnP
$88.99 USD
323+ In stock
In stock
US: 262 | CA: 61
323+
In stock
Where To Buy

Technical Specifications

Warranty Information
Warranty 2 Years
Hardware
Industry Standards IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-T, IEEE 802.11b/g/n Wireless
Interface USB 2.0
RJ45 (10/100 Ethernet)
Wireless Ethernet
Ports 1
Performance
Compatible Networks 10/100 Mbps
Frequency 2.4 GHz
Security Features WEP Data Encryption
WPA and WPA2-PSK Data Encryption
Supported Protocols TCP/IP (LDP / LPR Printer Port)
IPX
NetBEUI
AppleTalk
SNMP
SMB over IP
Connector(s)
Connector Type(s) 1 - USB Type-A (4 pin) USB 2.0 Female
1 - RJ-45 Female
1 - Wireless N (IEEE 802.11n)
Software
OS Compatibility Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016, 2019
Mac OS 10.x, 9.x
Linux (LTS Versions only)
Special Notes / Requirements
Note The device is compatible with any operating system that supports network printing. Please note that the included software is compatible with Windows only.
System and Cable Requirements USB printer cable not included
Indicators
LED Indicators 1 - Status
1 - USB
1 - WLAN
Power
Center Tip Polarity Positive
Input Current 0.2 A
Input Voltage 100 - 240 AC
Output Current 1 A
Output Voltage 5 DC
Plug Type H
Power Consumption (In Watts) 10
Power Source AC Adapter Included
Environmental
Humidity 0~70% RH (Non-Condensing)
Operating Temperature 0°C to 50°C (32°F to 122°F)
Storage Temperature -5°C to 65°C (23°F to 149°F)
Physical Characteristics
Color White
Material Plastic
Product Height 1 in [2.5 cm]
Product Length 2.8 in [72 mm]
Product Width 2.3 in [58 mm]
Weight of Product 1.8 oz [52 g]
Packaging Information
Package Height 2.7 in [68 mm]
Package Length 6 in [15.3 cm]
Package Width 9.1 in [23.2 cm]
Shipping (Package) Weight 10.8 oz [306 g]
What's in the Box
Included in Package 1 - Wireless Print Server
1 - Power Adapter
1 - Software CD
1 - Quick Install Guide

Compatibility

View full OS compatibility
Windows® XP, Vista, 7, 8, 8.1, 10
Windows Server® 2003, 2008 R2, 2012, 2016, 2019
Mac OS 10.x, 9.x
Linux (LTS Versions only)

Certifications

Related Products

1 Port 10/100 Mbps Ethernet Parallel Network Print Server
PM1115P2
1 Port 10/100 Mbps Ethernet Parallel Network Print Server

Convert a standard parallel printer into a shared network printer over a 10/100 Ethernet network

$86.99
1013+ In stock In stock
US: 978 | CA: 35
In stock Learn More

Accessories

1 Port USB Wireless N Network Print Server with 10/100 Mbps Ethernet Port - 802.11 b/g/n

Customer Reviews

3.8 (4 reviews)
3.8 out of 5 stars
Quality of Product
0
Tell us what you think of this product.


Need a little help getting started? Check out our review guidelines.

1 - 4 of 4 Reviews

(4 stars) Does the job, after some fiddling

By: Alex_s
Finally, I don't have to move my laptop to the room with the printer to be able to print! (It's been an issue ever since I got fibre optic internet and had to move the router to the basement. My printer supports Ethernet and USB but not WiFi.) Rather than follow the manual for setting up the WiFi connection, I just used the WPS button like soe reviewers on Amazon suggested. Much easier! But it was hard to tell if it worked or not until I hooked it up to the printer and followed the instructions to print a test page. Even now with everything working, the Status light is blinking and the instructions say it should be solid on when everything is good. I also had to dig through troubleshooting info on the internet to figure out how to change the IP address. My router only allows IP addresses in the 192.168.1.x range, but this print server is set to 192.168.0.10 by default. Eventually I figured out that I could connect it directly to my computer with an Ethernet cable, go to 192.168.0.10 in a web browser, and change the IP address there. Set up on Windows wasn't too difficult, but I did have to select the networking device (Network Print Server, USB, 1-port; or something like that) and the printer model manually. Setting up on Chrome OS was a bit trickier, but eventually found out that LPD (the option I had to pick on the Chromebook) is basically the same as LPR (listed in the specs for this device). Now it's all working! Just needs better documentation.
Comment Helpful? Yes - 0 No - 0 Report

(5 stars) Great unit

By: Thor
Bought it from Amazon and it was not matched to my network. I contacted tech support and in no time Alex connected with me. He was patiently walking me through the setup as well as making sure everything was working fine before he signed off. I have rarely if ever seen great product support such as this. Thank you and keep this up because I will be back for anything that you sell.
Comment Helpful? Yes - 0 No - 0 Report

(5 stars) Sorry I didn't buy one of these sooner

By: Retiree Ron
I bought this so that all the PCs on our home network (a mix of Win 7 and Win 10 machines) could share an older Dell laser. Before I installed it, I emailed Customer Support to clarify one point in the instructions. CS was helpful, as were the detailed FAQ instructions on the support site. If you can learn how to check IP addresses, you can install this thing. Using it is a breeze.
Comment Helpful? Yes - 2 No - 0 Report

(1 star) Network dropping after 5 or 10 min

By: JuanP
I bought this device few weeks ago and it works just 5 to 10 mins then we had to take off the power and then take in the power to get it work. This is not a normal behavior for a new device
Comment Helpful? Yes - 3 No - 1 Report
Response from StarTech.com:
Malcolm, Technical Support
We apologize for the issue you've experienced with our PM1115UW. I see you've already reached out to our Technical Support team, and a replacement has been recommended. Please let is know if there's anything further we can do to assist once you receive the replacement unit.