HP AJ716B Compatible SFP+ Transceiver Module - 8GFC
8 Gbps | Multi Mode Fiber | LC | 300 m (984 ft) | Lifetime Warranty
Product ID: AJ716BST
- 100% compatibility with HP AJ716B guaranteed
- StarTech.com SFP modules are backed by a lifetime warranty
- Meets or exceeds OEM specifications and Multi-Source Agreement (MSA) industry standards
- Low power consumption of less than 1.2 W
- Hot-swappable with fiber-optic modules
Volume Order?
Request a quote
Reseller Pricing:
Create an Account
Technical Specifications
| Warranty Information | ||
|---|---|---|
| Warranty | Lifetime | |
| Hardware | ||
| Compatible Brand | HP® | |
| Industry Standards | 8GFC | |
| Performance | ||
| Compatible Networks | 8 Gbps | |
| DDM | Yes | |
| Fiber Operating Mode | Full-Duplex | |
| Max Transfer Distance | 300 m (984 ft) | |
| Maximum Data Transfer Rate | 8 Gbps | |
| MTBF | 1,967,709 hours | |
| Type | Multi Mode | |
| Wavelength | 850nm | |
| Connector(s) | ||
| Local Unit Connectors | 1 - Fiber Optic LC Duplex Female | |
| Special Notes / Requirements | ||
| Note | For use in 8G Fibre Channel (8GFC) - Short Wave networking equipment and media converters | |
| System and Cable Requirements | MSA or HP compliant SFP+ port | |
| Power | ||
| Power Consumption (In Watts) | < 1.2 W | |
| Environmental | ||
| Humidity | 5~95% RH | |
| Operating Temperature | 0°C to 70°C (32°F to 158°F) | |
| Storage Temperature | -40°C to 85°C (-40°F to 185°F) | |
| Physical Characteristics | ||
| Color | Silver | |
| Enclosure Type | Aluminum | |
| Packaging Information | ||
| Package Height | 1.3 in [33 mm] | |
| Package Length | 3.7 in [93 mm] | |
| Package Width | 4.6 in [11.8 cm] | |
| Shipping (Package) Weight | 1.6 oz [46 g] | |
| What's in the Box | ||
| Included in Package | 1 - SFP+ transceiver | |
| Product Height | 0.5 in [12.6 mm] | |
| Product Length | 2.3 in [58.4 mm] | |
| Product Width | 0.5 in [13.9 mm] | |
| Weight of Product | 0.6 oz [18 g] | |
Certifications
Product Support
Data Sheets
-
AJ716BST_Datasheet.pdf
- Language: English
Frequently Asked Questions
Before You Buy
SFP fiber transceivers (mini-GBIC) are specific to applications and therefore, you need to select the correct fiber transceiver for your application. StarTech.com offers a few types of fiber transceivers: Cisco®, Cisco Meraki®, HP®, and Juniper® compatible, as well as standard gigabit SFP converters. Although the transceivers may be referred to as GBIC or mini-GBIC, the correct terminology for the device is small form-factor pluggable transceiver or SFP . StarTech.com does not carry GBIC converters.
If your device is not a Cisco device, it can still use Cisco compatible SFPs. Cisco SFPs are specifically coded to be compatible with Cisco devices. A standard SFP will not work in a Cisco device.
StarTech.com offers two different output connector types for SFPs: RJ-45 and fiber.
No special requirements are necessary to use RJ-45 SFPs. However, if you use fiber transceivers, the following items need to be the same as the interconnecting equipment:
-
The connector type, such as LC, SC, or ST.
-
The mode (single mode or multi mode).
-
The wavelength, such as 850 nm, 1310 nm, or 1550 nm.
-
The DDM support.
-
The speed, such as 10Gbps.
Note: The properties listed above cannot be converted or changed by a cable, excluding the connector type.
Compliance and Safety
Compliance Letters
-
Country of Origin (COO)
- Language: English
-
Declaration of Conformity (DOC)
- Language: English
-
Waste Electrical and Electronic Equipment Directive (WEEE)
- Language: English
California Residents
Warning: See Proposition 65 Notice
California Proposition 65 Warning
Warning: Cancer and reproductive harm — www.p65warnings.ca.gov
Safety Measures
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
Customer Reviews
(0 reviews)0 out of 5 stars
Tell us what you think of this product.
Need a little help getting started? Check out our review guidelines.
Follow us on Twitter