StarTech.com

2 Port Auto High Speed HDMI Switch

Share a single HDMI® display between two sources - auto detects priority source signal or signal loss

Product ID: VS122HDMIU

  • Automatically selects the priority of incoming video signals for display
  • Choice of automatic or manual switching
  • Supports HDTV resolutions up to 1080p
View More
  • Cables up to 30ft (10m) in length can be used at both the input and the output ports
  • High Speed HDMI® Compliant
  • HDCP Compliant
35,99 € EUR exc VAT
43,19 € EUR inc VAT
In stock with partners:
Where To Buy

Overview

The VS122HDMIU High Speed HDMI® Auto Switcher lets you share a display between 2 consumer electronic devices or computers and prioritize your HDMI signals. The HDMI switch features a primary and secondary HDMI input port, and automatically defaults to the signal from the primary input port. If the signal connected to the primary input port is lost, the device automatically switches to display the signal from the secondary HDMI input port.

Designed for maximum control and versatility, the high-speed HDMI auto switch box also offers manual control of connected signals with easy-to-use front panel buttons that allow you to toggle between video sources.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.

The StarTech.com Advantage

  • Automatically switch between High Speed HDMI® devices with VS122HDMIU's auto-sensing technology
  • Share one display/monitor between two consumer electronics devices or computers saving the cost of purchasing additional displays

Applications

Ideal for switching between consumer electronics devices such as Blu-ray players, satellite receivers, video game consoles and other devices

Switch between computers with HDMI® output

Technical Specifications

Warranty Information
Warranty 2 Years
Hardware
Audio Yes
AV Input HDMI
AV Output HDMI
Industry Standards High Speed HDMI®, HDCP
Ports 2
Performance
Max Distance 10 m / 33 ft
Wide Screen Supported Yes
Connector(s)
Connector A 2 - HDMI (19 pin) Female
Connector B 1 - HDMI (19 pin) Female
Special Notes / Requirements
Note Port 1 is set to have higher priority than port 2 when both signals are on
Indicators
LED Indicators 3 - Two Green for Display Status, and one red for power.
Power
Power Consumption (In Watts) 2.7
Environmental
Humidity 10% to 85%RH
Operating Temperature 0°C to 70°C (32°F to 158°F)
Storage Temperature -65°C to 150°C (-85°F to 302°F)
Physical Characteristics
Color Black
Enclosure Type Plastic
Product Height 15 mm [0.6 in]
Product Length 63 mm [2.5 in]
Product Weight 35 g [1.2 oz]
Product Width 59 mm [2.3 in]
Packaging Information
Shipping (Package) Weight 0.1 kg [0.3 lb]
What's in the Box
Included in Package 1 - 2 Port Automatic HDMI 1.3 Switch
1 - HDMI Cable
1 - Instruction Manual

Certifications

Related Products

4-to-1 HDMI Video Switch with Remote Control
VS410HDMIE
4-to-1 HDMI Video Switch with Remote Control

Switch between 4 HDMI® sources on one display or projector

102,99 € exc VAT
123,59 € inc VAT

Accessories

Product Support

Frequently Asked Questions

Before You Buy

This device outputs HDMI video signals. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

HDCP

When you consider whether to convert an HDMI video signal to another connection type, it is important to know if the media that is being converted from the HDMI video connection is protected by High-bandwidth Digital Content Protection (HDCP). If the media is protected by HDCP, you cannot convert to analog video connections because they do not support HDCP. You may experience this issue when you use devices like Blu-ray players, DVD players, and certain gaming consoles.

Target connection Conversion
VGA HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.
DVI

HDMI to DVI: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

 

This device has an HDMI input port.  If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.

Source Connection

Conversion

VGA

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

DVI

DVI to HDMI video converters: https://www.startech.com/Cables/Audio-Video/Video-Adapter/HDMI-Cable-Adapters/.

DVI to HDMI video cables: https://www.startech.com/Cables/Audio-Video/HDMI/HDMI-to-DVI/.

DisplayPort

DisplayPort to HDMI passive converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Passive.

DisplayPort to HDMI active converters: https://www.startech.com/AV/Displayport-Converters/DP-HDMI/?filter_CONVERTTYPE=Active.

DisplayPort Passive and Active Conversions

The converter that you require depends on the type of DisplayPort video source that you are using. For more information about converting DisplayPort video signals, refer to the following FAQ: https://www.startech.com/faq/DisplayPort_Converter_DP_Multi_Mode.

Troubleshooting

When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video switch

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI switch, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video switch, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video switch from your setup and test to make sure that the video source and video destination work together without the video switch.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, switch, and destination all need to support the resolution that you are using.