StarTech.com

USB Dual VGA over Cat5 KVM Console Extender - 650 ft / 200m

Operate a Dual VGA, USB-enabled PC up to 650ft away, as if it was installed locally

Product ID: SV565DUTPU

  • Dual VGA KVM extender at 1920x1200 resolution
  • Can be used with a single computer or connected to an existing KVM switch
  • Extend up to 650 ft. (200 m) using 2 industry-standard UTP network cables
View More
  • KVM console connections available on both the local and remote end
  • Supports most combo keyboard and mouse sets (including Wireless)
  • Intuitive hot-key commands for fine-tuning video
$637.99 CDN
4+ In stock
In stock
CA: 2 | US: 2
4+
In stock

Volume Order? Request a quote

Reseller Pricing: Create an Account

Overview

The SV565DUTPU USB Dual VGA KVM Console Extender over CAT5 UTP lets you Operate a Dual VGA PC or KVM switch up to 650ft (200 m) away, as if it was installed locally, at high-definition 1920x1200 resolution. PC connection cables are included with this product for a ready to use solution.

The dual VGA cat5 KVM extender supports easy to use hot-key and push button commands which allow you to switch between local and remote connected systems, while console connections at both ends of your setup provide easy access to all connected systems from either location. The hot-key commands also provide video adjustment controls for optimizing picture quality over varying distances. Extending over two standard Cat 5 (or better) cables gives you the ability to use existing infrastructure wiring to achieve remote access to your server or KVM switch.

Backed by a StarTech.com 3-year warranty and free lifetime technical support.

The StarTech.com Advantage

  • Low cost way to convert existing dual VGA KVM units, or individual Servers into remotely accessible hardware extending your hardware’s capabilities
  • Maintain network security with long distance local access without being exposed over IP
  • Broad support for newer USB keyboards, mice, and even most combo/wireless configurations

Applications

Ideal for controlling a PC in an area where fan or hard drive noise is unacceptable such as a television broadcast studio

Control/Monitor a remote server from a harsh environment where the PC would not function properly due to heat/dust/etc. (factory, warehouse, mining, etc.)

Can act as a thin client for power users controlling powerful rack mounted servers as their desktop machines

Use one or more servers in a server room from a remote location within the same building or campus

Technical Specifications

Warranty Information
Warranty 3 Years
Hardware
Audio No
Cables Included Yes
KVM Ports 2
Number of Monitors Supported 2
PC Interface USB
PC Video Type VGA
Rack-Mountable No
Performance
IP Control No
Max Transfer Distance 200 m (656 ft)
Maximum Analog Resolutions 1920x1200
MTBF 65,000 hrs
Supported Resolutions 1920x1200 @ 650 ft (200m)
Connector(s)
Console Interface(s) 2 - USB Type-A (4 pin) USB 2.0 Female
2 - VGA (15 pin, High Density D-Sub) Female
Host Connectors 2 - VGA (15 pin, High Density D-Sub) Female
Other Interface(s) 2 - RJ-45 Female
Software
OS Compatibility OS independent; No software or drivers required
Special Notes / Requirements
Note Product weights/measurements and connector types indicate a single unit only (either Host or Remote)
Power
Center Tip Polarity Positive
Input Current 0.2A
Input Voltage 110V-240V AC
Output Current 0.6A
Output Voltage 9 DC
Plug Type M
Power Consumption (In Watts) 5.4
Power Source AC Adapter Included
Environmental
Humidity 0~80% RH
Operating Temperature 0°C to 40°C (32°F to 104°F)
Storage Temperature -10°C to 60°C (14°F to 140°F)
Physical Characteristics
Color Black
Enclosure Type Steel
Product Height 1.6 in [40 mm]
Product Length 6.1 in [155 mm]
Product Weight 18.9 oz [535 g]
Product Width 3.1 in [80 mm]
Packaging Information
Shipping (Package) Weight 5 lb [2.3 kg]
What's in the Box
Included in Package 1 - local unit
1 - remote unit
2 - 6 ft 2-in-1 USB VGA KVM cables
1 - universal power adapter (NA/EU/UK/AU)
8 - rubber feet
1 - instruction manual
Supports any operating system.
No additional drivers or software required.

Certifications

Accessories

Product Support

Frequently Asked Questions

Before You Buy

This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

Target connection First conversion Second conversion (if required)
DVI-D VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.
DVI-I VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. N/A
HDMI

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

N/A
DisplayPort VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.

DVI-I and DVI-D

When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  

Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.

This device has a VGA input port.  If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.

Source connection

Conversion

DVI-I

DVI-I to VGA: https://www.startech.com/DVIVGAMFBK.

DVI-D

DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA.

HDMI

HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.

DisplayPort

DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/.

DVI-I and DVI-D

When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  Some DVI-I connections only support DVI-D signaling.  In this case, you must use a DVI-D to VGA converter.

Troubleshooting

There are some quick tests that you can complete to rule out potential issues. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video and Ethernet cables
  • Mouse and keyboard
  • Video source (such as a DVR or computer)
  • Video destination (such as a monitor or projector)

Note: When you test setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI extender, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use a different cable, mouse, keyboard, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
  • Use the cable, mouse, keyboard, video extender, video source, and video destination in another setup to see if the problem is with the components or the setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.
  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Test to make sure that the video source and video destination work together without using the KVM extender.
  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, extender, and destination all need to support the resolution that you are using.

USB Dual VGA over Cat5 KVM Console Extender - 650 ft / 200m

Customer Reviews

(0 reviews)
0 out of 5 stars
Quality of Product
0
Tell us what you think of this product.


Need a little help getting started? Check out our review guidelines.