7,6m (25 ft.) DisplayPort® Cable with Latches - M/M
Provide high resolution digital video and audio performance between your DisplayPort®-enabled devices
Product ID: DISPLPORT25L
- Molded latching connectors with strain relief
- Supports the DPCP (DisplayPort® Content Protection) standard in addition to HDCP
- Designed and manufactured to DisplayPort standards
Overview
The DISPLPORT25L 25-foot DisplayPort® cable provides a connection of up to 25ft between a DisplayPort source and a DisplayPort display, with no loss of signal quality – almost/,more than double the typical DisplayPort connection distance limitation of 16ft. Its 26 gauge (AWG) pure copper wire, and Aluminum and Mylar shielding helps to eliminate EMI and RFI interference. Delivering a maximum bandwidth of 10.8 Gbps, the DISPLPORT25L is capable of providing higher performance than either HDMI® or dual link DVI and supporting next generation multimedia applications with a maximum resolution capability of up to WQXGA (2560×1600).
The DisplayPort cable’s small, USB-sized latching connectors support two-way display connectivity and optional audio support.
The DISPLPORT25L DisplayPort cable is both HDCP and DPCP capable, ensuring that digitally protected content is displayed properly on the connected display.
The StarTech.com Advantage
- Latching connectors secure cable against accidental disconnection
- DisplayPort® offers full digital audio support (up to eight channels) in the same cable as video
- Provides a clear digital audio video signal
Applications
Connecting a DisplayPort® display to a PC or alternative DisplayPort source
Technical Specifications
| Product Numbers | ||
|---|---|---|
| Ingram DK | V930876 | |
| UPC Code | 065030834995 | |
| Warranty Information | ||
|---|---|---|
| Warranty | Lifetime | |
| Hardware | ||
| Cable Jacket Type | PVC - Polyvinyl Chloride | |
| Cable Shield Type | Aluminum-Mylar Foil with Braid | |
| Connector Plating | Nickel | |
| Fire Rating | CMG Rated (General Purpose) | |
| Number of Conductors | 19 | |
| Connector(s) | ||
| Connector A | 1 - DisplayPort (20 pin) Latching Male | |
| Connector B | 1 - DisplayPort (20 pin) Latching Male | |
| Physical Characteristics | ||
| Cable Length | 7.6 m [25 ft] | |
| Cable OD | 8.5 mm [0.3 in] | |
| Color | Black | |
| Connector Style | Latching | |
| Product Length | 7.6 m [25 ft] | |
| Product Weight | 0.5 kg [1.2 lb] | |
| Wire Gauge | 26 AWG | |
| Packaging Information | ||
| Shipping (Package) Weight | 0.5 kg [1.2 lb] | |
| What's in the Box | ||
| Included in Package | 1 - 25 ft DisplayPort® Cable with Latches - M/M | |
Certifications
Product Support
Drivers & Downloads
Compliance Letter(s):
Data Sheet(s)
- DISPLPORT25L_Datasheet-EN-EU.pdf
English
Frequently Asked Questions
Before You Buy
You should only use video converters and extenders if it is absolutely necessary to do so. In many cases, most video converters and extenders are not necessary if you purchase the correct cable.
The following table lists the maximum length of cable for common video standards.
| Video standard | Maximum length |
| DisplayPort | 50 ft. (15.2m) |
| HDMI | 50 ft. (15.2m) |
| DVI | 50 ft. (15.2m) |
| VGA | 200 ft. (71m) |
Note: StarTech.com offers cables longer than what is listed above, including active cables, which typically include built-in active signal boosters that allow for longer cables. Active cables are specifically designed to exceed the suggested maximum lengths and are tested at the listed specifications (for example, the maximum listed resolution).
Video adapters
Video adapters passively adapt a cable from one connector type to another. Video adapters do not change the signal type, or change the video standard.
Examples of common applications for adapters include the following:
-
DVI-I to VGA
-
RCA to BNC
-
Mini DisplayPort to DisplayPort
-
Couplers (female to female, or male to male)
Note: You can use a coupler to extend a cable for a short distance. However, each coupler that you use can introduce signal loss, which degrades the signal quality.
Video converters
Video converters actively process and change the signal type from one video standard and convert it to another standard. They are typically used to convert digital to analog and vice versa, but can be used to convert a digital signal to another digital video standard (for example, HDMI to DisplayPort).
Video converters work over short distances from the source to the destination: up to 15 feet or 3 meters.
Video extenders
Video extenders convert an input signal to a higher voltage for transmission over longer distances and then convert the input signal back to the original video standard. The input and the output signal will match on a video extender, as the same video standard is maintained end-to-end. If a cable is extended with adapters or converters, the signal quality degrades.
Note: For more information on using a video adapter or converter with a video extender, see the following FAQ: http://www.startech.com/faq/video_signal_converters_convert_then_extend.
