1 Port eSATA + 1 Port SATA PCI SATA Controller Card w/ LP Bracket

Add an internal SATA port and an external SATA (eSATA) port to your desktop computer through a PCI expansion slot


  • 1 internal SATA port and 1 external eSATA port
  • Large capacity drive support with 48-bit Logical Block Addressing (LBA)
  • Fully compliant with the Serial ATA 1.0a specification, with transfer rates up to 1.5Gbps
View More
  • Independent 256-byte FIFOs (32 bit x 64 deep) per SATA channel
  • Integrated PCI DMA engines
  • Includes a low profile/half-height installation bracket
31,99 € EUR exc VAT
39,99 € EUR inc VAT


This PCI based SATA Controller Card allows you to turn a PCI slot into one internal SATA and one external SATA (eSATA) connection. Supporting SATA 150 hard drives, and data transfer rates of up to 1.5Gbps, this controller card is the perfect solution if you need an extra SATA port or want to externalize your storage.

The Advantage

  • Supports hard drives larger than 136GB with 48-bit LBA and SATA transfer rates up to 1.5Gbps
  • Both internal and external SATA ports and full and low profile/half-height installation options for a flexible SATA expansion
  • Backed by a 2-year warranty and free lifetime technical support


Upgrade a PCI-based desktop with SATA and eSATA capabilities

Add additional SATA capabilities to a desktop computer

Add SATA capabilities to a low profile/small form factor (SFF) computer

Technical Specifications

Warranty Information
Warranty 2 Years
Bus Type PCI / PCI-X (5 / 3.3V)
Card Type Standard Profile (LP bracket incl.)
Chipset ID VIA/VLI - VT6421
Interface eSATA & SATA
Ports 2
Maximum Data Transfer Rate 1.5 Gb/sec
Port Multiplier No
Type and Rate SATA I (1.5 Gbps)
Connector Type(s) 1 - PCI / PCI-X (Universal 3.3 & 5V, 32-bit) Male
External Ports 1 - eSATA (7 pin, Data) Plug
Internal Ports 1 - SATA (7 pin, Data) Plug
OS Compatibility Windows® 2000, XP, Vista, 7, 8
Windows Server® 2003, 2008 R2
Linux 3.5.x to 4.11.x LTS Versions only
Physical Characteristics
Product Height 20 mm [0.8 in]
Product Length 121 mm [4.8 in]
Product Weight 46.6 g [1.6 oz]
Product Width 54 mm [2.1 in]
Packaging Information
Package Quantity 1
Shipping (Package) Weight 135 g [4.8 oz]
What's in the Box
Included in Package 1 - PCI eSATA Card
1 - SATA Data Cable
1 - Low Profile Bracket
1 - Software CD
1 - Instruction Manual


View full OS compatibility
Windows® 2000, XP, Vista, 7, 8
Windows Server® 2003, 2008 R2
Linux 3.5.x to 4.11.x LTS Versions only


Related Products

2 Port PCI Express eSATA Controller Adapter Card
2 Port PCI Express eSATA Controller Adapter Card

Add 2 eSATA ports to your desktop computer through a PCI Express expansion slot

25,99 € exc VAT
32,49 € inc VAT


Product Support

Frequently Asked Questions

Before You Buy

Although you can adapt a Serial Attached SCSI (SAS) drive to connect to a standard SATA controller card, the card must support SAS commands in order to communicate with SAS drives. SAS drives have a different command set that is not present on SATA controllers.

This SATA controller card only supports standard SATA drives.

This device does not support the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device does not support ATAPI, optical drives are also not supported over any IDE, SATA, or eSATA connections.

For a list of products that do support ATAPI, refer to the following FAQ:

Yes. This PCI card uses a universal connector keyed for both 3.3V and 5V that can be used with PCI and PCI-X. This type of connector is identified as having 2 separate notches, instead of just one.