Outdoor 150 Mbps 1T1R Wireless-N Access Point - 2.4GHz 802.11b/g/n PoE-Powered WiFi AP
Create a long-range, high-performance Wireless-N network from a wired connection – PoE powered
Product ID: AP150WN1X1OE
The AP150WN1X1OE Outdoor Wireless Access Point lets you create a long-range 150Mbps Wireless-N network outdoors, through a wired network connection, providing wireless connectivity for mobile devices such as Smartphones, tablets, and laptops.
This PoE-powered access point comes complete with a PoE Injector, so it can be conveniently installed in locations where a typical power outlet is unavailable. For versatile outdoor installation, the weather-resistant housing is pole and wall-mountable.
The AP offers an internal 1T1R 12dBi directional antenna with adjustable output strength to suit your required coverage area. The access point also integrates an optional RP-SMA connection so you can attach an external antenna and a secondary LAN port to connect to an additional wired network device, if needed.
Supporting wireless data rates up to 150Mbps on the 2.4GHz frequency, the high-performance wireless AP is compatible with 802.11b/g/n devices and offers support for WEP, WPA, and WPA2 authentication. The wireless access point incorporates an easy-to-use web-based utility to provide several customization options such as multiple SSIDs, remote firmware upgrades and Wireless Distribution System (WDS) mode support which can mesh multiple APs together to cover larger areas.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Protection from harsh outdoor elements with weather-resistant housing
- Simple setup with pole and wall-mounting installation options
- Achieve optimal wireless coverage with an optional external antenna connector
|Antenna Configuration||1x1:1 (TxR:S)|
|Chipset ID||Realtek - RTL8196C|
|Industry Standards||IEEE 802.3, IEEE 802.3u
IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
|Frequency Range||2.400 ~ 2.484 GHz|
|Maximum Data Transfer Rate||150 Mbps|
|WEP Data Encryption|
|WPA and WPA2-PSK Data Encryption|
|WPA and WPA2 Enterprise Data Encryption|
|Internal Ports||1 - RP-SMA (Coax, Reverse Polarity SubMiniature A) Female|
|2 - RJ-45 Female|
|Special Notes / Requirements|
|System and Cable Requirements||Available indoor AC electrical outlet|
|Cat 5 (or better) network cabling from PoE Injector to Wireless AP and PoE Injector to LAN Switch/router (no more than 100m total)|
|LED Indicators||1 - LAN Link/Activity|
|1 - PoE Link/Activity|
|1 - Power|
|1 - Wireless Link/Activity|
|Center Tip Polarity||Positive|
|Input Current||0.3 A|
|Input Voltage||100 - 240 AC|
|Output Current||1 A|
|Output Voltage||12V DC|
|Power Consumption (In Watts)||12|
|Power Source||AC Adapter Included|
|Operating Temperature||0°C to 70°C (32°F to 122°F)|
|Storage Temperature||-20°C to 70°C (-4°F to 158°F)|
|Product Height||59 mm [2.3 in]|
|Product Length||29.2 cm [11.5 in]|
|Product Width||92 mm [3.6 in]|
|Weight of Product||345 g [12.2 oz]|
|Package Height||93 mm [3.7 in]|
|Package Length||11.7 cm [4.6 in]|
|Package Width||33.5 cm [13.2 in]|
|Shipping (Package) Weight||692 g [24.4 oz]|
|What's in the Box|
|Included in Package||1 - Outdoor Access Point|
|1 - PoE Injector|
|1 - Metal Hose Clamp|
|1 - Power Adapter|
|1 - Instruction Manual CD|
Frequently Asked Questions
Before You Buy
You cannot replace the function of a router with the AP150WN1X1OD. You need a router connected to a modem to access the Internet.
The AP150WN1X1OD can be used to create a wireless access point for a router, switch, or networking device that does not have wireless capabilities. When you use the AP150WN1X1OD to create a wireless access point, wireless devices can be connected to a wired device. To connect a wireless device to a wired device, connect the wired network connection to the LAN port on the POE injector (gray box) or on the LAN port of the unit.
For more information about how to set up an access point, refer to the following FAQ: http://www.startech.com/faq/networking_ap150wn1x1od_access_point_setup.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.