Product ID: VGA2TV2WAY2
The VGA2TV2WAY2 Two Way (bi-directional) VGA to Component (HDTV) or Component (HDTV) to VGA video converter/scaler combines the features of a format converter and a video scaler, providing a cost-effective way to display and adjust VGA (PC) or component YPbPr (HDTV) feeds to fit the requirements of your display.
Designed to provide simplicity and convenience, the VGA HDTV video converter/scaler automatically detects the source input resolution, allowing you to select the output resolution and refresh rate you require through an easy to use On-Screen Display (OSD) menu. The built-in scaling functionality allows you to alter the output signal to a resolution that is compatible with your destination display or projector.
The VGA2TV2WAY2 is a replacement to the VGA2TV2WAY and offers increased compatibility with newer displays, VGA bypass port, and a more advanced OSD menu.
Backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||2 - Connector A||VGA (15 pin, High Density D-Sub)|
|1 - Connector B||VGA (15 pin, High Density D-Sub)|
|1 - Connector A||VGA (15 pin, High Density D-Sub)|
|Environmental||Operating Temperature||0°C to 40°C (32°F to 104°F)|
|Storage Temperature||0°C to 60°C (32°F to 140°F)|
|Packaging Information||Package Length||28.1 cm [11.1 in]|
|Package Width||69 mm [2.7 in]|
|Package Height||17.8 cm [7.0 in]|
|Shipping (Package) Weight||1.0 kg [2.3 lb]|
|Performance||Maximum Analog Resolutions||1920x1200|
|Supported Resolutions||TV - 480i, 576i, 480p, 576p(NTSC/PAL), 720p(50/60Hz), 1080i(25/30Hz), 1080p(50/60Hz)
PC (60Hz) - 1920x1200, 1680x1050, 1600x1200, 1280x800, 1280x1024, 1024x768, 800x600, 640x480
|Wide Screen Supported||Yes|
|Product Length||15.7 cm [6.2 in]|
|Product Width||10.2 cm [4.0 in]|
|Product Height||25 mm [1.0 in]|
|Weight of Product||332 g [11.7 oz]|
|Power||Power Source||AC Adapter Included|
|Output Voltage||5 DC|
|Center Tip Polarity||Positive|
|What's in the Box||1 - Included in Package||HDTV VGA Video Converter|
|3ft (1m) VGA to YPbPr RCA adapter|
|4ft (1.2m) VGA Cable M/M|
|Universal Power Adapter (US/UK/EU/AUS)|
This device is plug and play. It does not use any drivers, and does not require any setup tasks other than plugging in the source (for example, a computer) and the destination (for example, a monitor).
When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
To test your setup components, try the following:
Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.
Try the following:
The error “Out of Range” normally means that the resolution being output by the computer is not compatible with the display. Try lowering the resolution to see if that helps resolve the issue. You may need to connect another monitor or restart the computer or source to accomplish this.