Product ID: LP4POWEXT12
The LP4POWEXT12 Extension Cable features two 4-pin lp4 power connectors, one male and one female, and offers 12-inches in cable length, enabling you to extend your LP4 power connections and allowing you to position your devices (i.e. hard drive, DVD-ROM drive, add-in card, etc.) as needed within the system case.
Constructed of only top quality materials and designed for optimum performance and reliability, this 12in internal LP4 power extender is backed by StarTech.com’s lifetime warranty.
|Connector(s)||1 - Connector A||LP4 (4 pin; Large Drive Power)|
|1 - Connector B||LP4 (4 pin; Large Drive Power)|
|Packaging Information||Package Height||10,0 mm [0,4 in]|
|Package Length||22,5 cm [8,9 in]|
|Shipping (Package) Weight||22,0 g [0,8 oz]|
|Package Width||12,5 cm [4,9 in]|
|Physical Characteristics||Weight of Product||17,0 g [0,6 oz]|
|Wire Gauge||18 AWG|
|Cable Length||30,5 cm [12,0 in]|
|Product Length||30,5 cm [12,0 in]|
|Product Width||24,4 cm [9,6 in]|
|Product Height||84,0 mm [3,3 in]|
|What's in the Box||1 - Included in Package||12in LP4 Power Extension Cable|
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.