2x M.2 SATA SSD Controller Card - PCIe

Add two Next Generation Form Factor (NGFF) M.2 SATA SSDs to your computer through PCI Express

Product ID: PEX2M2

0 stars (0 reviews) |
  • Improve system performance, recover data, or create a redundant data backup by adding two M.2 solid-state drives (SSD) to your desktop PC
  • Wide installation compatibility, with support for virtually all M.2 NGFF drives (22110, 2280, 2260, 2242, 2230)
  • Two M.2 B-Key onboard sockets that support SATA III transfer speeds up to 6Gbps
Your price
€95.99 EUR excl. VAT
€115.19 EUR incl. VAT

This M.2 SSD controller card lets you install two M.2 SATA solid-state drives (SSD) into your PC through PCI Express. You can mount virtually any M.2 drive directly to the card, giving you a convenient and discreet way to improve your computer system performance. Plus, the card is a vital computer add-on if you need to recover data from an existing M.2 drive, or for expanding your overall internal storage.

Leverage the speed and size of M.2 drives

This M.2 controller card lets you take full advantage of the performance and size benefits of NGFF (Next Generation Form Factor) SSDs. M.2 drives are smaller than typical platter drives or mSATA-based SSDs, so you can install them in tighter areas within your computer case. By freeing up space within your computer, you’ll also have more room for additional hardware upgrades.

When you couple the card with an M.2 drive, you can give your computer’s performance a noticeable speed boost, enabling you to replace your platter drive with a faster M.2 SATA III (6Gbps) solid-state drive. By installing your operating system on the M.2 drive, you'll have faster access to the files you commonly use, and you can continue to use your higher-capacity platter HDD for bulk storage.

Rest assured, with simple and cost-effective data recovery

Due to their performance and size advantages, M.2 drives are commonly used in laptops. If your laptop has failed but its M.2 drive is functional, then this card can help with data recovery. Once the M.2 drive is installed and the data recovery is complete, you can continue to use the drive for storage and backup purposes.

Wide compatibility

You can also rest assured that your M.2 SATA drives are compatible with the card. It supports the most common drive sizes, including 22110, 2280, 2260, 2242 and 2230.

The M.2 controller provides additional installation flexibility with a dual-profile design that fits standard or low-profile cases, so it’s the perfect solution for small form-factor or full-sized computers.

Get up and running quickly

This M.2 SSD controller card is easy to install, with native OS support and no additional drivers or software required.

The PEX2M2 is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Applications

  • Access and recover data from almost any M.2 SSD, such as drives pulled from laptops and other computers
  • Connect an M.2 drive to your computer through PCI Express
  • Install your operating system on an M.2 drive for fast access, while keeping larger platter drives available for bulk storage
  • Get the most out of your SSDs by installing two AHCI SATA III drives discreetly inside your computer tower

Partner Numbers

  • Ingram Micro France V933598
  • Tech Data - France 4462139
  • UPC 065030863049

Compatibility

  • OS Independent logo
OS Independent; No additional drivers or software required

Specifications

Warranty Information Warranty 2 Years
Connector(s) Connector Type(s) 1 - PCI Express x4
Internal Ports 2 - M.2 (SATA, B-Key, NGFF)
1 - SP4 (4 pin, Small Drive Power)
Environmental Operating Temperature 5°C to 50°C (41°F to 122°F)
Storage Temperature -25°C to 70°C (-13°F to 158°F)
Humidity 20%~80% RH (Non-condensing)
Hardware Ports 2
Interface M.2 SATA
Bus Type PCI Express
Card Type Standard Profile (LP bracket incl.)
Port Style Integrated on Card
Industry Standards Serial ATA 3.0 specification - SATA I/II/III (1.5/3/6Gbps)
PCI Express 2.0
Chipset ID ASMedia - ASM1062
Packaging Information Package Height 48 mm [1.9 in]
Package Length 16 cm [6.3 in]
Shipping (Package) Weight 0.2 kg [0.4 lb]
Package Width 21.8 cm [8.6 in]
Performance Type and Rate SATA III (6 Gbps)
Port Multiplier No
Hardware Raid Supported No
Physical Characteristics Weight of Product 62 g [2.2 oz]
Material Steel
Product Length 18 cm [7.1 in]
Product Width 20 mm [0.8 in]
Product Height 12 cm [4.7 in]
Software OS Compatibility OS Independent; No additional drivers or software required
Special Notes / Requirements System and Cable Requirements PCI Express x4 slot (backward compatible with x8, and x16 slots)
Note The maximum throughput of this card is limited by the bus interface. If used with PCI Express Gen 1.0 enabled computers, the max throughput is 2.5Gbps per lane. If used with PCI Express Gen 2.0 enabled computers, the max throughput is 5Gbps per lane.
What's in the Box Included in Package 1 - M.2 SATA SSD controller card
1 - low-profile bracket
2 - M.2 mounting screws

Accessories

LP4SATAFMD

LP4 to SATA Power Cable Adapter with Floppy Power

Power up to two 4-pin LP4hard drives or devices, and a floppy drive, from a single SATA power supply connector

Your price
€5.99 EUR excl. VAT
€7.19 EUR incl. VAT

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions

Before You Buy

This device does not support the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device does not support ATAPI, optical drives are also not supported over any IDE, SATA, or eSATA connections.

For a list of products that do support ATAPI, refer to the following FAQ: https://www.startech.com/faq/hard_drive_controllers_atapi_support.

Although you can adapt a Serial Attached SCSI (SAS) drive to connect to a standard SATA controller card, the card must support SAS commands in order to communicate with SAS drives. SAS drives have a different command set that is not present on SATA controllers.

This SATA controller card only supports standard SATA drives.

Although M.2 SSDs come in similar form factors, only an M.2 SATA drive with an NGFF B key will operate with this device. M.2 drives that are PCIe or have a different key position are not compatible with this device.

This device can adapt an M.2 SATA drive to standard SATA connections, which is not possible for a PCIe based M.2 drive. The key type refers to the connector type on the M.2 SATA drive. B key can be M.2 PCIe x2 or SATA, so it is important that you check the specifications of the drive to see if it supports SATA.

How To

No, this hard drive controller card does not support starting an operating system from a connected hard drive.

For a list of hard drive controller cards that support this feature and instructions on how to configure them, refer to the following FAQ: https://www.startech.com/faq/hard_drive_controllers_os_install_on_controller.

Compliance and safety

Compliance letters

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Feedback Back to top