Product ID: 25SAT35HDD
The 25SAT35HDD 2.5" to 3.5" hard drive adapter enclosure turns a 2.5" SATA hard drive (HDD) or solid state drive (SSD) into a 3.5" drive.
The adapter enclosure lets you substitute a 3.5" hard drive for a 2.5" SSD/HDD in any application that would typically require a 3.5" drive, such as desktop chassis, backplane, or docking station. The enclosure has the same dimensions as a standard 3.5" hard drive, including mounting points, and SATA connector locations.
With support for drives up to 12.5mm in height, and high-capacity SATA I/II/III drives (tested up to 1TB) this HDD adapter ensures compatibility with virtually any 2.5" SATA hard drive or solid state drive.
The 25SAT35HDD is backed by a StarTech.com 2-year warranty and free lifetime technical support.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Drive Connectors||SATA Data & Power Combo (7+15 pin)|
|1 - Host Connectors||SATA Data & Power Combo (7+15 pin)|
|Environmental||Operating Temperature||5°C to 55°C (32°F to 131°F)|
|Storage Temperature||5°C to 55°C (32°F to 131°F)|
|Humidity||5% - 85% RH|
|Number of Drives||1|
|Compatible Drive Types||SATA|
|Number of 2.5 inch bays||1|
|Packaging Information||Package Height||38.0 mm [1.5 in]|
|Package Length||16.3 cm [6.4 in]|
|Package Width||11.5 cm [4.5 in]|
|Shipping (Package) Weight||260.0 g [9.2 oz]|
|Performance||Type and Rate||SATA III (6 Gbps)|
|Hardware Raid Supported||No|
|Max Drive Capacity||Currently tested with up to 1TB 7200 RPM hard drives|
|Insertion Rating||Door: 500 cycles NSS Connector: 50,000 cycles|
|Physical Characteristics||Material||Aluminum and Plastic|
|Max Drive Height||12.5 mm [0.5 in]|
|Product Length||14.6 cm [5.7 in]|
|Product Width||10.2 cm [4.0 in]|
|Product Height||36.0 mm [1.4 in]|
|Weight of Product||260.0 g [9.2 oz]|
|What's in the Box||1 - Included in Package||2.5” to 3.5” SATA HDD/SSD Enclosure|
Power an IDE hard drive from a SATA Power connection.
Power a Serial ATA hard drive from a conventional LP4 power supply connection
This high quality SATA cable is designed for connecting SATA drives even in tight spaces.
Make a right-angled connection to your SATA drive, for installation in tight spaces
Connect and position SATA drives easily - designed for larger cases
Hot-swap any 3.5in SATA hard drive easily from any computer with a 5.25in bay
Hot swap up to three 3.5in SATA hard drives in seconds
Easily connect and hot swap dual 2.5” and 3.5” SATA/SAS hard drives from a 5.25” bay
Hot swap up to four 3.5in SATA hard drives in seconds
Hot swap 3.5in SATA hard drives in and out of your PC, from a 5.25in bay
Easily connect and hot swap up to three 3.5” SATA/SAS hard drives from two 5.25” bays