Industrial 8 Port Gigabit PoE Switch - 4 x PoE+ 30W - Power Over Ethernet - Hardened GbE Layer/L2 Managed Switch - Rugged High Power Gigabit Network Switch IP-30/-40C to +75C

Connect up to 8 different GbE (4 PoE+) devices, using this IP30 industrial Ethernet switch with intelligent Layer 2 management

Product ID: IES81GPOEW

0 stars (0 reviews) |
  • POWER OVER ETHERNET: Industrial gigabit PoE switch up to 30W/4 PoE ports (PSE) to IEEE 802.3af (PoE) & IEEE 802.3at (PoE+) for cameras sensors wi-fi APs w/Cat5e or higher cable Total power budget 120W
  • FLAT DESIGN: Compact IP-30 steel housing w/6kV ESD/Vibration/shock/free fall rating allows for front access w/easy install; DIN rail/wall mounting options w/hardware incl; -40C to 75C operating temps
  • FLEXIBLE POWER: Rugged/hardened GbE network switch can be hardwired using terminal block (48-56VDC) power or by Type-M barrel plug (12-48v); terminal block kit included
Your price
€414.99 EUR excl. VAT
€497.99 EUR incl. VAT

Easily deploy or scale your network with this Gigabit Ethernet switch, by adding eight copper Gigabit Ethernet (GbE) connections, including four PoE+ ports. This IP30 industrial network switch provides intelligent Layer 2 management. Its rugged, compact design and wall-mount option with front access make it ideal for demanding applications, even where space is limited.

Expand your network

This Gigabit Ethernet switch lets you expand your network by connecting up to eight RJ45 devices (four PoE+). The 8-port switch enables up to eight users to share files and devices, such as printers and scanners, over a LAN connection, by enhancing your existing network capacity with additional ports.

Supports PoE+ for flexible use

The switch gives you the freedom to place your equipment in locations where power outlets are not available, with support for Power over Ethernet Plus. The network switch provides abundant PoE power, with up to 30 watts for each PoE port (120W budget).

Wall-mountable with front access

With its compact design, you can wall-mount the Gigabit switch to provide convenient front access to ports and indicators. It’s ideal for a wide range of applications, including tight installation areas with significant electromagnetic interference, such as control cabinets and panels. The network switch is also DIN-rail mountable.

Efficient Layer 2 management

The switch delivers efficient and stable performance, with Layer 2 management capabilities. This lets you control packet traffic on a busy network, and customize your settings to achieve optimal network performance, offering improved efficiency and reliability.

Rugged industrial design

This rugged network switch features an IP30-rated metal housing and extended operating temperature range of -40°C to 75°C, which makes it ideal for a wide range of conditions. The sturdy metal enclosure offers durability, even in harsh industrial environments.

Reliable connection for seamless network performance

With support for 10/100/1000Mbps transfer speeds, this managed switch supports full/half-duplex auto-negotiation, jumbo frames, and auto MDI/MDIX operation. This lets you connect your network devices quickly and easily, with little to no configuration required.

To help prevent any unnecessary downtime, the switch features redundant 12-58V DC terminal block power inputs, which ensures seamless operation in the event of power dips or failures.

The IES81GPOEW is backed by a StarTech.com 2-year warranty and free lifetime technical support.

Applications

  • Install in a server rack or cabinet, or wall mount in a convenient location
  • An ideal solution for many network applications including IP surveillance, wireless LAN, building/home automation network and Internet of things (IoT)
  • Add small workgroups to expand your existing network in a business or home office
  • Works well in industrial, non-climate controlled environments, such as warehouses

Partner Numbers

  • UPC 065030871112

Specifications

Warranty Information Warranty 2 Years
Connector(s) 4 - Connector Type(s) RJ-45
RJ-45 (PoE+)
1 - Connector Type(s) Terminal Block (3 Wire)
Environmental Operating Temperature -40°C to 75°C (-40°F to 167°F)
Storage Temperature -40°C to 90°C (-40°F to 194°F)
Humidity 5~95% RH (Non-Condensing)
Hardware Ports 8
Industry Standards IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.3ab 1000BASE-T, IEEE 802.3u 100BASE-FX, IEEE 802.3z 1000BASE-SX,IEEE 802.3z 1000BASE-LX, 4-Port IEEE 802.3af/at Power over Ethernet end-span PSE
Indicators 1 - LED Indicators Power
8 - LED Indicators PoE Active (yellow)
Link/Activity (green)
Packaging Information Shipping (Package) Weight 930 g [32.8 oz]
Package Length 30 mm [1.2 in]
Package Width 17.3 cm [6.8 in]
Package Height 92 mm [3.6 in]
Performance Maximum Data Transfer Rate 2 Gbps (Full-Duplex)
Maximum Cable Length 100 m [328.0 ft]
Buffer Size 512 KB
Flow Control IEEE 802.3x pause frame for full-duplex, back pressure for half-duplex
Surge Protection 6kV ESD, 6kV EFT
Compatible Networks 10/100/1000 Mbps
Auto MDIX Yes
Full Duplex Support Yes
Jumbo Frame Support 9K max.
Switching Architecture Store-and-Forward
MTBF > 100,000 hrs @ 25 degrees C
Supported Protocols IEEE 802.3ad Port Trunk with LACP, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1w Rapid Spanning Tree Protocol, IEEE 802.1s Multiple Spanning Tree Protocol, IEEE 802.1p Class of Service, RFC 3810 MLD version 2, RFC 792 ICMP, RFC 2068 HTTP, RFC 1112 IGMP version 1, RFC 2236 IGMP version 2, RFC 3376 IGMP version 3, RFC 2710 MLD version 1, IEEE 802.1Q VLAN Tagging, IEEE 802.1x Port Authentication Network Control, bIEEE 802.1ab LLDP, RFC 768 UDP, RFC 793 TFTP, RFC 791 IP
Physical Characteristics Color Black
Material Steel
Product Length 13.4 cm [5.3 in]
Product Width 14.8 cm [5.8 in]
Product Height 25 mm [1.0 in]
Weight of Product 650 g [22.9 oz]
Power Power Source Terminal Block
Input Voltage 48 ~ 56V DC
Input Current 1A minimum
Plug Type M
Special Notes / Requirements Patents and Licenses The following patents are licensed for this product. This list might not be all inclusive.
• United States Patent No. 5,406,260 (expired)
• United States Patent No. 6,650,622
• United States Patent No. 7,457,250
• United States Patent No. 8,155,012
• United States Patent No. 8,902,760
• United States Patent No. 8,942,107
• United States Patent No. 9,019,838
• United States Patent No. 9,049,019
• United States Patent Application No. 14/695,456
• United States Patent Application No. 14/726,940
Note 4 ports support IEEE 802.3at Power over Ethernet Plus (PoE+) and IEEE 802.3af Power over Ethernet (PoE)
Supports PeE Powered Device alive check, scheduled power recycling, and time-based PoE schedule
PoE power up to 30W per PoE+ port (120W budget) and remote PoE power control
A power adapter is not included with this switch.
What's in the Box 1 - Included in Package network switch
terminal block connector
4 - Included in Package screw anchors
screws
attaching pins
locking pins
washers
magnets
1 - Included in Package DIN rail
3 - Included in Package DIN-rail screws
8 - Included in Package RJ45 dust caps
1 - Included in Package quick-start guide

Accessories

Your price
€4.99 EUR excl. VAT
€5.99 EUR incl. VAT

Drivers/Downloads

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Manual(s):

Datasheet

Product Support

Talk to an Advisor

We are always ready to assist you with any questions you may have.

Live Chat (opens in new window)

Frequently Asked Questions

Troubleshooting

This device's default static IP address is 192.168.0.100.

  1. Make sure that the IES81GPOEW is on the same network as your computer.
  2. In an Internet browser, enter the IP address of the unit. The default IP address is 192.168.0.100.
  3. In the user name field, enter the user name. The default user name is admin.
  4. In the password field, enter the password. The default password is admin.

Compliance and safety

Compliance letters

  • RoHS
    • Language: English
  • WEEE
    • Language: English

Safety Measures

  • If product has an exposed circuit board, do not touch the product under power.
  • If Class 1 Laser Product. Laser radiation is present when the system is open.
  • Wiring terminations should not be made with the product and/or electric lines under power.
  • Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
  • Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
*Product appearance and specifications are subject to change without notice.

Customer Reviews

(0 reviews)
0 out of 5 stars
  • 5 (0)
  • 4 (0)
  • 3 (0)
  • 2 (0)
  • 1 (0)
Tell us what you think of this product.
Need a little help getting started?

Check out our review guidelines.

Feedback Back to top