Product ID: HD2SDI
The HD2SDI HDMI to dual SDI converter enables you to turn your HDMI audio/video signal into two 3G SDI video outputs. The 3G SDI video outputs can then be individually extended up to 755ft (230m) over standard coaxial cable for large scale HD-SDI video distribution.
With dual SDI outputs, you can connect your HDMI video source to a local SDI display and output an additional SDI signal into your broadcasting equipment, providing a scalable solution for any SDI broadcasting application that requires an HDMI input.
To ensure you maintain perfect high-definition video quality, the HD-SDI converter supports resolutions up to 1080p, which lets you convert HDMI to SDI without sacrificing video quality.
For hassle-free installation, the HDMI to SDI converter offers a plug-and-play solution that includes pre-installed mounting brackets and requires no software or driver installation.
The HD2SDI is backed by a StarTech.com 2-year warranty and free lifetime technical support.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(s) | 1 - Connector A | HDMI (19 pin) |
2 - Connector B | SDI (BNC) | |
Environmental | Operating Temperature | 0°C to 40°C (32°F to 158°F) |
Storage Temperature | -10°C to 60°C (14°F to 176°F) | |
Humidity | 5% to 90 % RH (no condensation) | |
Hardware | Active or Passive Adapter | Active |
AV Input | HDMI | |
AV Output | SDI (BNC) | |
Ports | 2 | |
Cabling | Coaxial | |
Audio | Yes | |
Rack-Mountable | Yes | |
Chipset ID | Gennum - GV7600 | |
Daisy-Chain | No | |
Packaging Information | Package Height | 55 mm [2.2 in] |
Package Length | 21.7 cm [8.5 in] | |
Package Width | 15.1 cm [5.9 in] | |
Shipping (Package) Weight | 625 g [22.1 oz] | |
Performance | Maximum Data Transfer Rate | 2.97 Gbps |
Maximum Cable Length | 230 m [754.4 ft] | |
Max Distance | 230 m / 755 ft | |
Maximum Digital Resolutions | 1080p | |
Supported Resolutions | 1920x1080 (1080p) @ 24, 25, 30, 50 & 60 FPS 1920x1080 (1080i) @ 50 & 60 FPS 1280x720 (720p) @ 24, 25, 30, 50 & 60 FPS |
|
Wide Screen Supported | Yes | |
Audio Specifications | 8 Channel Digital Audio @ 48 kHz | |
General Specifications | Supports 525i & 625i SD D1 format Supports 8-bit or 10-bit component digital video: RGB or YCbCr 4:4:4 sampled YCbCr 4:2:2 or 4:2:0 sampled |
|
Physical Characteristics | Color | Black |
Material | Steel | |
Product Length | 100 mm [3.9 in] | |
Product Width | 70 mm [2.8 in] | |
Product Height | 25 mm [1.0 in] | |
Weight of Product | 202 g [7.1 oz] | |
Power | Power Source | AC Adapter Included |
Input Voltage | 100 - 240 AC | |
Input Current | 0.5 A | |
Output Voltage | 5 DC | |
Output Current | 2 A | |
Center Tip Polarity | Positive | |
Plug Type | M | |
Power Consumption (In Watts) | 10 | |
Special Notes / Requirements | System and Cable Requirements | The converter is intended for distribution of original content. Digitally encrypted HDMI sources will not be converted. |
What's in the Box | 1 - Included in Package | HDMI to SDI Adapter |
Mounting bracket assembly (attached) | ||
Universal Power Adapter (NA/UK/EU) | ||
Instruction manual |
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)When you troubleshoot issues with a video adapter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video cables
Video adapter
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
To test your setup components, try the following:
Use the cable, video adapter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video adapter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video adapter from your setup and test to make sure that the video source and video destination work together without the video adapter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, adapter, and destination all need to support the resolution that you are using.
Check out our review guidelines.