Product ID: SV431DHD4KU
This 4-port HDMI KVM switch lets you control four HDMI computers with a single mouse, keyboard and monitor up to 4K 30Hz. The KVM also features 3.5 mm audio and a built-in 2-port USB 3.0 hub.
With support for ultra-high-definition 4K 30Hz resolutions, this 4-port KVM switch can drive dual HDMI displays with crystal clarity, making it ideal for graphical applications that require UHD capability.
This 4-port KVM switch offers two USB 3.0 ports, as well as four HID keyboard and mouse ports, so you can share peripheral devices between each computer and avoid the cost of separate equipment. The USB 3.0 hub automatically switches your connected devices to the selected computer, saving you the hassle of disconnecting and reconnecting peripherals.
Along with dual UHD video capability, this KVM switch features auxiliary 3.5 mm dual-channel bi-directional audio ports. This independent analog audio lets you share your analog audio devices such as speakers or a microphone between each of your connected computers, giving you complete multimedia control of your systems.
The SV431DHD4KU is TAA compliant and backed by a StarTech.com 2-year warranty with free lifetime technical support.
Warranty Information | Warranty | 2 Years |
---|---|---|
Connector(s) | 2 - Console Interface(s) | HDMI |
8 - Host Connectors | HDMI | |
4 - Console Interface(s) | USB Type-A (4 pin; HID Port) USB 1.1 | |
4 - Host Connectors | USB 3.1 USB Type-B (9 pin, Gen 1, 5 Gbps) | |
2 - Console Interface(s) | USB 3.1 USB Type-A (9 pin, Gen 1, 5 Gbps) | |
4 - Host Connectors | 3.5mm Stereo Female 3 pos | |
1 - Console Interface(s) | 3.5mm Stereo Female 3 pos | |
Environmental | Operating Temperature | 0°C~40°C |
Storage Temperature | -10°C~60°C | |
Humidity | 0%~80% | |
Hardware | Audio | Yes |
KVM Ports | 4 | |
PC Interface | USB | |
PC Video Type | HDMI | |
Number of Monitors Supported | 2 | |
Rack-Mountable | Optional | |
Indicators | 4 - LED Indicators | LED for Source Status and Selected PC |
1 - LED Indicators | power LED | |
Packaging Information | Shipping (Package) Weight | 1,8 kg [4,0 lb] |
Package Length | 29,5 cm [11,6 in] | |
Package Width | 12,4 cm [4,9 in] | |
Package Height | 85,0 mm [3,3 in] | |
Performance | IP Control | No |
Hot-Key Selection | Yes | |
Maximum Data Transfer Rate | 5Gbps | |
Maximum Digital Resolutions | 3840 x2160 @ 30Hz | |
Wide Screen Supported | Yes | |
Auto Scan | 3, 8, 15 & 30 seconds | |
Port Selection Support | Push Button and Hotkeys | |
General Specifications | 3D Video Support: Yes | |
MTBF | 168000 hours | |
Physical Characteristics | Color | Black |
Material | Steel | |
Product Length | 22,0 cm [8,7 in] | |
Product Width | 13,0 cm [5,1 in] | |
Product Height | 63,0 mm [2,5 in] | |
Weight of Product | 1,2 kg [2,7 lb] | |
Power | Power Source | AC Adapter Included |
Input Voltage | 100 - 240 AC | |
Input Current | 0.6 A | |
Output Voltage | 12V DC | |
Output Current | 1.5 A | |
Center Tip Polarity | Positive | |
Plug Type | M | |
Power Consumption (In Watts) | 18W | |
What's in the Box | 1 - Included in Package | KVM Switch |
quick-start guide | ||
4 - Included in Package | rubber feet | |
1 - Included in Package | universal power adapter (NA/JP, UK, EU, ANZ) |
Mount a 1U SV431 Series KVM switch into your server rack or cabinet
Connect to your external solutions and transfer data at 10x the speed of USB 2.0
We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)We are always ready to assist you with any questions you may have.
Live Chat (opens in new window)Monitors may begin flickering when they receive a signal of insufficient quality. There are a few potential fixes available that will help to improve the signal quality in order to eliminate flickering:
There are some quick tests that you can perform to rule out potential issues. Start by turning off all of the connected computers and peripherals, unplugging everything from the KVM, including power, and leaving it for 10 seconds. Then connect everything to the KVM following the procedure in the following FAQ: https://www.startech.com/faq/kvm-switches-setup.
You can test to make sure that the following components are working correctly and are not the source of the issue:
Video cables
KVM switch
Video source (such as a DVR or computer)
Video destination (such as a monitor or projector)
Note: When you are testing your setup components, it is recommended that you avoid using any video adapters. For example, if you are converting a VGA source to HDMI to be used with an HDMI extender, you should test with an HDMI source.
To test your setup components, try the following:
Use the video cable, KVM switch, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different video cable, KVM switch, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the KVM switch from your setup and test to make sure that the video source and video destination work together without the KVM switch.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, KVM switch, and video destination all need to support the resolution that you are using.
There are four troubleshooting actions that you can try if some but not all of the ports and your computer are working with the KVM switch.
In order for your mouse to move properly between your monitors you must rearrange your monitors in Windows to match the physical location of your monitors on your desk. To do so, complete the following based on your operating system:
Windows 10 and Windows 8
Windows 7 and Windows Vista
Windows XP
To mirror the image from your primary monitor instead of extending your desktop, refer to the following FAQ: http://www.startech.com/faq/Windows_Mirroring_Monitors
KVM stands for Keyboard Video Mouse and KVM switches allow you to switch the use of a keyboard, display and mouse between multiple computers. KVM switches also commonly let you switch audio and USB devices between computers.
There are different types of KVM switches as well.
Standard box and cable KVM switches are a simple way to switch the use of a keyboard, display, and mouse between multiple computers. Multi-monitor KVM switches allow you to switch multiple displays between computers, and IP KVM switches allow you to remotely control the KVM switch and connected computers over a network.
Here are some important things to consider before purchasing a KVM switch.
There are a couple of other important things you may want to take note of:
It can be difficult to tell which ones are right for the KVM switch you are interested in. How can you tell which KVM cables you require? How can you tell if a KVM switch requires proprietary cables? How do these cables work?
Standard KVM Switches and Cables
Note: You will need one bundle of KVM cables per computer you want to connect to the KVM switch.
Standard KVM switches have no special cable requirements. If you have spare video and PS/2 or USB cables, you can use them to hook up the KVM switch to your computers. StarTech.com still sells KVM cable packages, but they are just for the convenience of buying them in bundles and usually involve some savings. Keep in mind that even if you have some of the cables you need, it still might be advantageous to buy the bundle.
KVM Switches with Opposite Gender Video Connections
Some KVM switches use male video connections for the computers and female video connections for the console ports. In this case you simply need a video extension cable, or a KVM cable package appropriate to the KVM switch. This is so you cannot accidentally plug cables from your computer into the console ports.
KVM Switches Requiring Proprietary Cables
KVM switches can also use proprietary KVM cables to connect to the individual computers. This is often done with larger KVM switches and KVM switches intended for a server environment. These cables use a proprietary pinout which does not conform to the video standard in use, as the cable carries both the video and PS/2 or USB data along a single cable.
If you are unsure whether or not you need special cables, complete the following:
Note: If there are no PS/2 or USB ports on the back of the KVM switch other than for the console, you will require proprietary cables.
If at this point you require further assistance in deciding which cables to purchase with your StarTech.com KVM switch, contact our technical support team.
Whether a specific mouse or keyboard will work with StarTech.com KVM switches can depend on the type of mouse or keyboard you use. Any mice with additional functionality or keyboards that are not standard 104 key keyboards could cause issues. This includes wireless, gaming, combination (one USB receiver for both the mouse and keyboard), and Apple keyboards. We recommend that you use a standard wired mouse and keyboard with our KVM switches, especially when you troubleshoot issues.
If you cannot get a specific mouse or keyboard to work with your KVM switch, connect the mouse or keyboard into the USB hub ports, if available (they are marked on the back of the KVM switch). If the KVM switch has hotkey functionality, you will lose the functionality when using these hub ports.
The beeping sounds cannot be disabled. They help confirm that a successful or unsuccessful hotkey command has been entered. Many people position their KVM switch out of sight. As a result, this feature saves time by not having to check the LEDs or press the physical buttons on the KVM switch.
Check out our review guidelines.