3 Port Component Video Splitter with Digital Audio
Split a single Component(YPbPr) video signal with audio to 3 monitors or projectors
Product ID: ST123HDA
- Distribute high definition component video and 5.1 channel digital audio
- Supports resolutions up to 1080p
- Works with standard and high definition displays
This high quality Component Video Splitter lets you share a single Component video signal as well as the corresponding audio, across 3 displays simultaneously.
Offering true high definition performance, the Component splitter supports video resolutions up to 1080p, and 5.1 channel digital audio.
A versatile video solution, the Component video splitter can also be used as a Composite video splitter, allowing for up to 3 distinct Composite video signals to be distributed to up to 9 displays.
The Composite video/Component video splitter is backed by our 2-year warranty and free lifetime technical support.
The StarTech.com Advantage
- Make the most out of this product and use it as a component video and digital audio splitter or composite video splitter
- Converge A/V by StarTech.com offers a full line of Professional A/V products backed by a 2-year warranty and free lifetime technical support
Ingram Micro New Zealand
|AV Input||Audio RCA|
|AV Output||Audio RCA|
|Audio Specifications||Signals Supported: Digital (5.1 channel), Stereo (2 channel)|
|Connector A||3 - Component Video (3 x RCA) Female|
|3 - Digital Coax Audio (RCA) Female|
|3 - Stereo Audio (2 x RCA) Female|
|Connector B||1 - Component Video (3 x RCA) Female|
|1 - Digital Coax Audio (RCA) Female|
|1 - Stereo Audio (2 x RCA) Female|
|Special Notes / Requirements|
|Note||Three separate composite video sources can be distributed to up to 9 displays using this device (3 per video source)|
|Output Voltage||5 DC|
|Power Consumption (In Watts)||5|
|Power Source||AC Adapter Included|
|Product Height||4.1 in [10.5 cm]|
|Product Length||5.6 in [14.1 cm]|
|Product Width||1.5 in [38 mm]|
|Weight of Product||19.4 oz [550 g]|
|Package Height||7.2 in [18.2 cm]|
|Package Length||11.1 in [28.2 cm]|
|Package Width||2.8 in [72 mm]|
|Shipping (Package) Weight||2.2 lb [1 kg]|
|What's in the Box|
|Included in Package||1 - component (YPbPr) A/V splitter|
|1 - component RCA cable|
|1 - composite RCA cable|
|1 - RCA audio cable|
|1 - universal power adapter (NA, EU, UK, ANZ)|
Frequently Asked Questions
When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
Video source (such as a DVD player or computer)
Video destination (such as a monitor or projector)
Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI splitter, you should use an HDMI source when you test the components.
To test your setup components, try the following:
Use the cable, video splitter, video source, and video destination in another setup to see if the problem is with the components or the setup.
Use a different cable, video splitter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cables, it is recommended that you do the following:
Test each cable individually.
Use short cables when you are testing.
When you test the video source and video destination, it is recommended that you do the following:
Remove the video splitter from your setup and test to make sure that the video source and video destination work together without the video splitter.
Test to make sure that the video source and video destination work together at the resolution that you want to use.
Note: In order for your setup to work properly, the video source, splitter, and destination all need to support the resolution that you are using.
Video splitters take the output for monitor port 1 and mirror it to the remaining outputs. By default, the first output port is the master port that is mirrored to each additional monitor. Make sure that you use the first output port when you use the video splitter. The master port is labeled on the splitter boxes from StarTech.com. On the splitter cables from StarTech.com, the master port is the top port.
If you are having issues with a splitter interpreting the incorrect port as the master port, try the following:
Unplug all of the video connections.
If the splitter is powered, power cycle the splitter.
Plug in all of the video connections again.
Make sure that the first video connection plugged in is the one that you want to be the master port.
You might encounter resolution issues when you use a video splitter. This can occur because the information and resolution on one display are being copied and sent to each of the additional displays. You should make sure that all of the displays that you are using can support the output resolution. For more information, refer to the following FAQ: https://www.startech.com/faq/video_splitters_correct_port_usage
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.