12in SATA to LP4 Power Cable Adapter - F/M
Power an LP4 device from a SATA Power connection on your computer power supply
Product ID: LP4SATAFM12
The LP4SATAFM12 SATA to LP4 Power Cable Adapter enables you to power 4-pin Molex devices (i.e. hard drive, DVD-ROM drive, add-in card, etc.) from a SATA power connector on your computer power supply. Offering 12 inches in cable length, the cable allows you to position your devices as needed within the system case.
Constructed of only top quality materials and designed for optimum performance and reliability this 12in SATA to Molex Cable is backed by StarTech.com’s lifetime warranty.
The StarTech.com Advantage
- Position devices as needed within your computer case, with an extended power connection
- Guaranteed reliability
Ingram Micro New Zealand
|Connector A||1 - SATA Power (15 pin) Plug|
|Connector B||1 - LP4 (4 pin; Large Drive Power) Female|
|Cable Length||12 in [304.8 mm]|
|Product Height||0.3 in [0.8 cm]|
|Product Length||12 in [304.8 mm]|
|Product Width||1.2 in [30 mm]|
|Weight of Product||0.6 oz [16 g]|
|Wire Gauge||18 AWG|
|Package Height||0.4 in [9 mm]|
|Package Length||8.9 in [22.5 cm]|
|Package Width||4.9 in [12.5 cm]|
|Shipping (Package) Weight||0.7 oz [21 g]|
|What's in the Box|
|Included in Package||1 - 12in SATA to LP4 Power Cable Adapter - F/M|
Frequently Asked Questions
When you troubleshoot issues with an internal power cable, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:
To test your setup components, try the following:
Use the power supply, computer part, and power cable in another setup to see if the problem is with the components or the setup.
Use a different power supply, computer part, and power cable in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.
When you test your cable, it is recommended that you do the following:
Make sure that the cable is firmly inserted into both ends.
The polarity (usually indicated by the color of the cables) matches.
No pins are bent or missing on the power supply cable or header, or the computer part.
Compliance and Safety
- If product has an exposed circuit board, do not touch the product under power.
- If Class 1 Laser Product. Laser radiation is present when the system is open.
- Wiring terminations should not be made with the product and/or electric lines under power.
- Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines.
- Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards.
* Product appearance and specifications are subject to change without notice.