StarTech.com

4 Port VGA Video Splitter - 250 MHz

Split a single VGA video signal to 4 monitors or projectors

Product ID: ST124L

  • Supports resolutions up to 1920x1440
  • Supports cable distances up to 210ft
  • 250MHz video bandwidth
View More
  • Supports Cascading up to 3 levels
  • Compatible with VGA, SVGA and Multisync monitors
$85.99 CDN
186+ In stock
In stock
CA: 13 | US: 173
186+
In stock
Where To Buy

Overview

The ST124L 4 Port VGA Video Splitter allows a single VGA source to display VGA video onto four monitors simultaneously. Perfect for classrooms, tradeshows, or in-store displays where high quality video on several monitors is needed. The simple plug and play operation makes setup quick and easy so you can be up and running in minutes.

The ST124L supports up to 250 MHz of video bandwidth, providing brilliant resolutions up to 1920x1440. A built-in booster circuit lets you situate your displays up to 210 ft away from your source.

Backed by a StarTech.com 2-year warranty and free lifetime technical support.
Male to Female VGA extension cable required (MXT101HQ)

The StarTech.com Advantage

  • Integrated signal amplifier boosts your connection range to 210 feet (65 meters)
  • High quality construction and high resolution support maintains signal strength for crisp, sharp imaging
  • Multiple screens let you communicate your message more effectively to large audiences with greater impact

Applications

Use for in-store product merchandising in retail environments to give your advertisements greater visibility

Display travel schedules and alerts in airports, bus terminals and train stations

Create engaging multimedia presentations for demonstration in lecture halls and classrooms

Get your message across multiple displays for trade-shows or information booths/kiosks

Quick and easy solution to split a video signal in an auditorium or house of worship

Technical Specifications

Warranty Information
Warranty 2 Years
Hardware
AV Input VGA
AV Output VGA
Ports 4
Performance
Bandwidth 250MHz
General Specifications Male to Female VGA extension cable required (MXT101HQ)
Maximum Analog Resolutions 1920x1440
Maximum Cable Length 210 ft [64 m]
Connector(s)
Connector A 1 - VGA (15 pin, High Density D-Sub) Male
Connector B 4 - VGA (15 pin, High Density D-Sub) Female
Special Notes / Requirements
Note Does not support EDID information
Power
Input Voltage 120 AC
Output Current 0.5A
Output Voltage 9 DC
Power Consumption (In Watts) 4.5
Power Source AC Adapter Included
Physical Characteristics
Color Black
Product Height 1 in [26 mm]
Product Length 8.1 in [207 mm]
Product Weight 14.8 oz [419.6 g]
Product Width 2.8 in [70 mm]
Packaging Information
Shipping (Package) Weight 2.1 lb [1 kg]
What's in the Box
Included in Package 1 - 4 Port VGA Splitter
1 - Power Adapter
1 - User Manual

Certifications

Related Products

8 Port VGA Video Splitter - 250 MHz
ST128L
8 Port VGA Video Splitter - 250 MHz

Split a VGA signal to 8 VGA monitors or projectors

$102.99
42+ In stock In stock
CA: 10 | US: 32
In stock Learn More
4 Port VGA Video Splitter - Wall Mountable
ST124W
4 Port VGA Video Splitter - Wall Mountable

Split a VGA signal to 4 VGA monitors or projectors

$85.99
143+ In stock In stock
CA: 22 | US: 121
In stock Learn More
4 Port High Resolution VGA Video Splitter - 350 MHz
ST124PRO
4 Port High Resolution VGA Video Splitter - 350 MHz

Split a single high resolution VGA video signal to 4 monitors or projectors

$102.99
276+ In stock In stock
CA: 27 | US: 249
In stock Learn More

Accessories

Product Support

Frequently Asked Questions

Before You Buy

This device outputs a VGA signal. If you have a display or video destination that uses another type of video connection, there are ways that you can convert the video signal or connection. These options are outlined below and organized by the target connection.

Target connection First conversion Second conversion (if required)
DVI-D VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DVI-D: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.
DVI-I VGA to DVI-I: https://www.startech.com/Cables/Audio-Video/Video-Adapter/DVIVGA/. N/A
HDMI

VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI.

N/A
DisplayPort VGA to HDMI: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=VGA&filter_AVOUTPUT=HDMI. HDMI to DisplayPort: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=DisplayPort.

Note: You might need to use more than one converter as part of your solution; however, you should try to use the least number of converters and cables to connect your source and destination. If you have the option to convert to multiple target video connections, choose the option that requires the fewest number of conversions.

DVI-I and DVI-D

When you convert from VGA to DVI, you need to know if you are converting to a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you need, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  

Note: Certain devices may have a DVI-I connection but only support DVI-D signaling. It is important to verify that your DVI-I device supports DVI-I signaling.

This device has a VGA input port.  If you have a video source that uses another video connection, there are options available to convert the video signal or connection. These options will be outlined below for each video source connection.

Source connection

Conversion

DVI-I

DVI-I to VGA: https://www.startech.com/DVIVGAMFBK.

DVI-D

DVI-D to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=DVI-D&filter_AVOUTPUT=VGA.

HDMI

HDMI to VGA: https://www.startech.com/AV/Converters/Video/?filter_AVINPUT=HDMI&filter_AVOUTPUT=VGA.

DisplayPort

DisplayPort to VGA: https://www.startech.com/AV/Displayport-Converters/DP-VGA/.

DVI-I and DVI-D

When you convert from DVI to VGA, you need to know if you are converting from a DVI-I or a DVI-D connection. For more information about how to identify the type of connection that you have, refer to the following FAQ: https://www.startech.com/faq/video_signal_converters_dvi_interface.

You also need to know which form of DVI that you are using, because DVI-I supports both analog (VGA) and digital (HDMI) signals, while DVI-D only supports digital (HDMI) signals.  Some DVI-I connections only support DVI-D signaling.  In this case, you must use a DVI-D to VGA converter.

Troubleshooting

When you troubleshoot issues with a video splitter, there are some quick tests that you can complete to rule out potential problems. You can test to make sure that the following components are working correctly and are not the source of the issue:

  • Video cables

  • Video splitter

  • Video source (such as a DVD player or computer)

  • Video destination (such as a monitor or projector)

Note: When you are testing setup components, you should avoid using video adapters. For example, if you are converting a VGA source to HDMI for use with an HDMI splitter, you should use an HDMI source when you test the components.

To test your setup components, try the following:

  • Use the cable, video splitter, video source, and video destination in another setup to see if the problem is with the components or the setup.

  • Use a different cable, video splitter, video source, and video destination in your setup to see if the problem persists. Ideally, you should test a component that you know works in another setup.

When you test your cables, it is recommended that you do the following:

  • Test each cable individually.

  • Use short cables when you are testing.

When you test the video source and video destination, it is recommended that you do the following:

  • Remove the video splitter from your setup and test to make sure that the video source and video destination work together without the video splitter.

  • Test to make sure that the video source and video destination work together at the resolution that you want to use.

Note: In order for your setup to work properly, the video source, splitter, and destination all need to support the resolution that you are using.

Video splitters take the output for monitor port 1 and mirror it to the remaining outputs. By default, the first output port is the master port that is mirrored to each additional monitor. Make sure that you use the first output port when you use the video splitter. The master port is labeled on the splitter boxes from StarTech.com. On the splitter cables from StarTech.com, the master port is the top port.

If you are having issues with a splitter interpreting the incorrect port as the master port, try the following:

  1. Unplug all of the video connections.

  2. If the splitter is powered, power cycle the splitter.

  3. Plug in all of the video connections again.

  4. Make sure that the first video connection plugged in is the one that you want to be the master port.

You might encounter resolution issues when you use a video splitter. This can occur because the information and resolution on one display are being copied and sent to each of the additional displays. You should make sure that all of the displays that you are using can support the output resolution. For more information, refer to the following FAQ: https://www.startech.com/faq/video_splitters_correct_port_usage

4 Port VGA Video Splitter - 250 MHz

Customer Reviews

(0 reviews)
0 out of 5 stars
Quality of Product
0
Tell us what you think of this product.


Need a little help getting started? Check out our review guidelines.