Can’t find the product you need? Our support team is standing by to help you find the right solution or recommend replacement products. Click here for live chat.
StarTech.com

USB 3.1 (10Gbps) Standalone Duplicator Dock for 2.5" & 3.5" SATA SSD/HDD Drives - with Fast-Speed Duplication up to 28GB/min

Duplicate or dock a SATA SSD/HDD with fast performance - works with both USB-C and USB-A enabled devices

Product ID: SDOCK2U313R

  • Duplicate hard drives quickly, without a host computer, at fast speeds of up to 28GB per minute for SSDs
  • Works with both USB-C and USB-A enabled devices, with two cables included
  • Compatible with Thunderbolt 3 USB-C port
View More
  • Transfer files at high speed between a docked hard drive and a host computer
  • Supports 3.5in and 2.5in SATA SSDs/HDDs
  • USB 3.1 (10Gbps) with UASP support for high speed data transfers and backup
  • Provides TRIM support
  • Supports SATA I/II/III (up to 6Gbps)
  • Dual-bay, top slot-loading design (toaster-style) with drive doors and HDD ejection button
  • Tool-less and tray-less design
  • Compatible with SAT2IDEADP for additional IDE drive support
  • Multi-function LED indicators
  • Backward compatible
$199.99 CAD
586+ In stock
In stock
CA: 15 | US: 571
586+
In stock
Where To Buy
Same Day Shipping on in-stock items from Canada if ordered by 5pm ET* Details

Volume Order?
Request a quote

Reseller Pricing:
Create an Account

Technical Specifications

Warranty Information
Warranty 2 Years
Hardware
Bus Type USB 3.1 Gen 2
Chipset ID ASMedia - ASM1352R
Compatible Drive Types SATA
Drive Installation Removable
Drive Size 2.5in & 3.5in
Fan(s) No
Interface USB 3.1 Gen 2
Number of Drives 2
Performance
4Kn Support Yes
Duplication Modes Sector by Sector (Whole Drive)
Duplication Speed 28GBpm
Hot Swap Capability Yes
Max Drive Capacity Tested with up to 6TB drives
Maximum Data Transfer Rate 10Gbps
Port Multiplier No
RAID No
TRIM Support Yes
Type and Rate USB 3.1 Gen 2 - 10 Gbit/s
SATA III (6 Gbps)
UASP Support Yes
Connector(s)
Drive Connectors 2 - SATA Data & Power Combo (7+15 pin) Receptacle
Host Connectors 1 - USB 3.1 USB Type-B (9 pin, Gen 2, 10 Gbps) Female
Software
OS Compatibility OS independent; No software or drivers required
Special Notes / Requirements
Note Windows 7 and earlier Windows versions do not support TRIM with USB to SATA devices.
Indicators
LED Indicators 1 - Power
1 - Mode
2 - HDD Status
1 - Clone
Power
Center Tip Polarity Positive
Input Current 1.5A
Input Voltage 100 - 240 AC
Output Current 3000 mA
Output Voltage 12V DC
Plug Type M
Power Consumption (In Watts) 36
Power Source AC Adapter Included
Environmental
Humidity 20%RH ~ 80%RH
Operating Temperature 5°C - 35°C (41°C to 95°C)
Storage Temperature -20°C - 50°C (-4°C to 122°C)
Physical Characteristics
Color Black
Material Plastic
Max Drive Height 1 in [25.4 mm]
Product Height 2.8 in [7 cm]
Product Length 5.6 in [14.2 cm]
Product Width 5.2 in [13.2 cm]
Weight of Product 17.9 oz [508 g]
Packaging Information
Package Height 3.5 in [88 mm]
Package Length 6.5 in [16.6 cm]
Package Width 11.8 in [30 cm]
Shipping (Package) Weight 35 oz [992 g]
What's in the Box
Included in Package 1 - USB 3.1 duplicator docking station
1 - USB-C to B cable - 40 inches
1 - USB 3.0 A to B cable - 40.75 inches
1 - universal power adapter (NA/EU/UK/AU) - 40.75 inches (cable)
1 - quick start guide
Supports any operating system.
No additional drivers or software required.

Certifications

Related Products

Drive Eraser and Dock for 2.5 / 3.5in SATA SSD / HDD - USB 3.0
SDOCK1EU3P
Drive Eraser and Dock for 2.5 / 3.5in SATA SSD / HDD - USB 3.0

Securely erase a SATA HDD/SSD without a host device, or dock your drive for easy access

$393.99
236+ In stock In stock
CA: 13 | US: 223
In stock Learn More
4 Bay USB 3.0 eSATA to SATA Standalone 1:3 HDD Hard Drive Duplicator Dock
SATDOCK4U3RE
4 Bay USB 3.0 eSATA to SATA Standalone 1:3 HDD Hard Drive Duplicator Dock

Duplicate one SATA Hard Drive onto three Hard Drives simultaneously

$765.99
344+ In stock In stock
CA: 2 | US: 342
In stock Learn More
eSATA / USB 3.0 Hard Drive Duplicator Dock – Standalone HDD Cloner with SATA 6Gbps for fast-speed duplication
SDOCK2U33RE
eSATA / USB 3.0 Hard Drive Duplicator Dock – Standalone HDD Cloner with SATA 6Gbps for fast-speed duplication

Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 or eSATA for easy access

$187.99
926+ In stock In stock
CA: 53 | US: 873
In stock Learn More
USB 3.0 / eSATA 6-Bay Hard Drive Duplicator Dock - 1:5 HDD / SSD Cloner and Eraser
SATDOCK5U3ER
USB 3.0 / eSATA 6-Bay Hard Drive Duplicator Dock - 1:5 HDD / SSD Cloner and Eraser

Duplicate a 2.5 in. or 3.5 in. SATA drive to five drives simultaneously, or dock the source drive or the five target drives to a computer through USB 3.0 or eSATA

$1,263.99
133+ In stock In stock
CA: 3 | US: 130
In stock Learn More
Standalone 2.5 / 3.5” SATA Hard Drive Duplicator w/ Multi HDD / SSD Image Backup Library
SATDUP11IMG
Standalone 2.5 / 3.5” SATA Hard Drive Duplicator w/ Multi HDD / SSD Image Backup Library

Duplicate one 2.5/3.5” hard drive to another without connecting to a computer, or backup multiple drive images to a library drive to restore PC/Server images easily

$466.99
62+ In stock In stock
CA: 4 | US: 58
In stock Learn More
USB 3.0 SATA Hard Drive Duplicator & Eraser Dock - Standalone 2.5/3.5in HDD & SSD Eraser and Cloner
SATDOCK2REU3
USB 3.0 SATA Hard Drive Duplicator & Eraser Dock - Standalone 2.5/3.5in HDD & SSD Eraser and Cloner

Clone a 2.5in/3.5in SATA drive without a host computer connection, or dock the drives over USB 3.0 for easy access

$122.99
1459+ In stock In stock
CA: 27 | US: 1432
In stock Learn More
Standalone 1:5 USB Flash Drive Duplicator and Eraser – Flash Drive Copier
USBDUP15
Standalone 1:5 USB Flash Drive Duplicator and Eraser – Flash Drive Copier

Easily duplicate or securely erase up to five USB 2.0 Flash Drives simultaneously, without connecting to a computer

$741.99
290+ In stock In stock
CA: 0 | US: 290
In stock Learn More
1:2 Standalone USB Duplicator and Eraser for Flash Drives
USBDUP12
1:2 Standalone USB Duplicator and Eraser for Flash Drives

USB Cloner | 1.5GB per minute | USB 2.0 | TAA Compliant

$202.99
360+ In stock In stock
CA: 8 | US: 352
In stock Learn More

Accessories

USB 3.1 (10Gbps) Standalone Duplicator Dock for 2.5" & 3.5" SATA SSD/HDD Drives - with Fast-Speed Duplication up to 28GB/min

Customer Reviews

3.7 (6 reviews)
3.7 out of 5 stars
Quality of Product
0
Tell us what you think of this product.


Need a little help getting started? Check out our review guidelines.

1 - 6 of 6 Reviews

(4 stars) So far, so good but NOT HOT SWAPPABLE

By: brian163
I've only used this a few days and it immediately addressed the issue I was having with a less expensive USB dock that would dismount a drive randomly. However, the technical specs are wrong. This unit does not support hot swap. If you dismount and physically remove one disk, the other one will disconnect briefly. This is confirmed in the user guide and should be corrected on this page so as not to misinform customers.
Comment Helpful? Yes - 1 No - 0 Report

(4 stars) Satisfied

By: NASA_System_Admin
At my federal agency, I support a number of users who each have these drive docks, and who use them heavily every day, writing or reading terabytes of data. With these docks, our users can share data faster than transferring files across a network. My users do not often use the duplication feature, but I use it regularly. We have seen two of these units fail, but in once case, that was definitely as a result of the user connecting an improper power supply to the unit. While this is obviously not StarTech's responsibility, it would be helpful if the power supplies for these units came with a clearly visble StarTech sticker or label with the bay's name and model on that label. Other drive bay and power supply manufacturers should do the same. StarTech promptly replaced the second bay that failed. The plastic covers over the ports on the drive bays are a little fragile; many of our docks are missing one or both. We would like to see a side-mounted, quiet cooling fan that would cool both drives when in heavy use. We will continue to buy these products, and we are hopeful that StarTech will release a cooled dual disk Thunderbolt drive bay in the near future; we need better performance than we can get from just USB-C. We would also like to see a cooled bay to duplicate PCIe NVMe drives.
Comment Helpful? Yes - 1 No - 0 Report

(3 stars) Good , but no rooms for a SSD Caddy ...

By: T hor S tang
I bought this today(March 2020) and it seems to work fine, except one thing.. I use it with a SSD Caddy(Thin plastic Cover around it to the Atomos Ninja V (Video-recorder), so I have to remove the Caddy everytime I take a Backup. I think a SSD-Caddy is very common used for videorecorders, is there a trick to fix this problem..?
Comment Helpful? Yes - 0 No - 0 Report
Response from StarTech.com:
Matt, Customer Support
We apologize for the difficulties you're experiencing with our SDOCK2U313R. The drive slots in this duplicator are large enough for 3.5" drives so it should fit an SSD with a small case. However, due to the placement of the SATA connector in the duplicator and the way SATA drives are manufactured, there won't be any space for a case along the bottom of the drive. This is standard for stand-up duplicators like the SDOCK2U313R as it ensures that drives do not move when being accessed. If you're just trying to access the data on an SSD, using a USB to SATA adapter such as our USB3S2SAT3CB may be a better solution so you don't need to remove the caddy.

(1 star) Cannot Duplicate To 1TB SSD

By: dcgo409
I bought this dock to duplicate laptop hard drives. It worked fine for 250GB hhd to 500GB ssd but now it will not recognize a 1TB ssd when in copy mode.
Comment Helpful? Yes - 1 No - 0 Report
Response from StarTech.com:
Matt, Customer Support
We're sorry to hear that you're having difficulties cloning with a 1TB SSD in our SDOCK2U313R. If your source drive is larger than your destination drive, this can cause problems because hardware duplicators like this do a sector-by-sector copy which copies both used and blank space. If you're trying to clone from a smaller to larger drive, or between drives of the same size, we'd like to look into this issue further with you to help fix it. Please contact us at www.startech.com/support where our Technical Advisors are available 24 hours a day, 5 days a week to provide support.

(5 stars) 20 harddrives duplicated, 20 to go.

By: Theis
Easy and fast harddrive duplication. Install harddrives, press power, press copy and press start. It can't be any easier. 320GB harddrive takes around 1hour to 1½hour. Support is great too, took about 14hours to answer. Despite the diffrence in time between US and EU.
Comment Helpful? Yes - 3 No - 0 Report

(5 stars)

By: Niall_D
I have tis unit now and its predessor a few years. Gets the job done quickly, Buttons a bit frail, handle with care and you will have a great product that will get all your clone drives backups ready in case of HDD Failure. Great dockinf station also.
Comment Helpful? Yes - 3 No - 1 Report