1,8m (6 ft.) Mini DisplayPort to VGA Cable - M/M
Connect your VGA monitor to a Mini DisplayPort-equipped computer using a single cable
Product ID: MDP2VGAMM6
- All-in-one cable design
- Supports resolutions up to 1920x1200 and HDTV resolutions up to 1080p
- No software or additional drivers required
- Compatible with Intel® Thunderbolt™
The MDP2VGAMM6 6-foot Mini DisplayPort to VGA Cable is a cost-effective Mini DisplayPort to VGA link that lets you connect a VGA monitor to a PC or Mac® with a Mini DisplayPort output - saving the expense of upgrading the monitor for compatibility.
This all-in-one, easy to use Mini DisplayPort/VGA cable requires no additional converters or adapters, and no driver or software installation.
Compatible with Intel® Thunderbolt™, when connected directly to a supporting DisplayPort over Thunderbolt™ I/O port.
Backed by a StarTech.com 2-year warranty.
The StarTech.com Advantage
- All-in-one cable design for ease of use and optimal cable management
- Resolution support of up to 1920x1200 and HDTV resolutions up to 1080p for optimal viewing experience
- No software or additional driver installation allows for an easy and hassle-free connection to your VGA display
Keep your existing VGA display with our Mini DisplayPort to VGA video converter cables
Use a VGA monitor on a DisplayPort-equipped MacBook® or iMac® computer, using the Mini DisplayPort video output
|Active or Passive Adapter||Active|
|Adapter Style||Cable Adapter|
|Converter Type||Cable Adapters|
|Maximum Analog Resolutions||1920x1200 / 1080p|
|Maximum Cable Length||1.8 m [6 ft]|
|Connector A||1 - Mini-DisplayPort (20 pin) Male|
|Connector B||1 - VGA (15 pin, High Density D-Sub) Male|
|Operating Temperature||5°C to 35°C (41°F to 95°F)|
|Storage Temperature||0°C to 70°C (32°F to 158°F)|
|Cable Length||1.8 m [6 ft]|
|Product Length||1828.8 mm [72 in]|
|Product Weight||90 g [3.2 oz]|
|Shipping (Package) Weight||90 g [3.2 oz]|
|What's in the Box|
|Included in Package||1 - 6 ft Mini DisplayPort to VGA Cable - M/M|
Connect your VGA monitor to a DisplayPort equipped computer
Connect a DVI monitor to a single-mode DisplayPort output from your computer
Connect your HDMI® monitor or HDTV to a DisplayPort® equipped computer
Connect your VGA monitor to a Mini DisplayPort equipped computer
Connect a DVI display to a Mini DisplayPort® equipped PC or MAC®
Drivers & Downloads
Frequently Asked Questions
Before You Buy
Unfortunately no, this device has an intended source and an intended destination. Refer to the title of the webpage for this order.
The DisplayPort to VGA adapter only converts from DisplayPort to VGA, which means that the DisplayPort connection must be the source and the VGA connection must be the destination.
Note: DisplayPort to VGA adapters are active, and can be used with any version of DisplayPort.
When you convert video from a source that uses DisplayPort or Mini DisplayPort to DVI or HDMI (for example, a computer to a monitor), you will need to consider the difference between passive and active adapters.
If the source supports dual-mode DisplayPort (also known as DP++), then you can use a passive adapter because the source can perform the conversion. If the source does not support DP++, then you need to use an active converter, which includes additional chips to perform the conversion.
Thunderbolt ports support DP++ natively. To run multiple monitors from the same computer, refer to the Active Adapters section below.
Passive adapters are less expensive since they do not need to include additional chips. A quick way to check whether you can use a passive adapter is to see if the DisplayPort or Mini DisplayPort source has the DP++ symbol above it. The symbol is a D with a P inside of it, with two + signs to the left, one on top of the other.
Active adapters use additional chips to make the conversion inside the adapter, regardless of whether the source supports DP++. This means that active adapters are more expensive than passive adapters.
If you want to use multiple monitors with the same computer, you should use an active adapter because some video cards cannot run the maximum number of monitors while using DP++. This is especially true if the computer has more than one DisplayPort or Mini DisplayPort connection. Check with your video card manufacturer to confirm which type of adapter you need for the setup that you would like to run.
Note: You should use passive adapters with StarTech.com MST hubs, except when you are converting from DisplayPort to VGA, since that type of conversion requires active adapters. For more information on using adapters with StarTech.com MST hubs, refer to the following FAQ: http://www.startech.com/faq/mst_hubs_passive_vs_active_adapters.
If you experience issues when you connect passive video signal adapters to the Surface Dock, Microsoft recommends that you use active video signal converters instead. StarTech.com offers an active video signal converter for DVI monitors (MDP2DVIS) and for HDMI monitors (MDP2HD4KS).
Note: This issue does not apply to the Surface Pro 3 Docking Station.
* Product appearance and specifications are subject to change without notice.