StarTech.com

1 Port PCI Express IDE Controller Adapter Card

Add a 2-channel IDE port to a computer through a PCI Express slot

Product ID: PEX2IDE

  • Includes a low profile installation bracket
28,99 € EUR exc VAT
36,24 € EUR inc VAT
Not Available
May be in stock with partners
Where To Buy

For more products like this please visit our European online store today!

Overview

Applications

Replace a failed IDE port

Add an IDE port for connecting legacy ATA devices such as old hard drives and tape drives

Technical Specifications

Warranty Information
Warranty Lifetime
Hardware
Card Type Standard Profile (LP bracket incl.)
Chipset ID JMicron - JMB368
Interface IDE
Ports 1
Performance
LBA support 48-bit
Connector(s)
Internal Ports 1 - IDE (40 Pin, EIDE/PATA) Male
Software
OS Compatibility Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2008 R2, 2012, 2016
Special Notes / Requirements
System and Cable Requirements Available PCI Express expansion slot
Physical Characteristics
Product Weight 120 g [4.2 oz]
What's in the Box
Included in Package 1 - PCI Express IDE Controller Card
1 - IDE Cable
1 - Low Profile Bracket
1 - Instruction Manual

Compatibility

View full OS compatibility
Windows® 2000, XP, Vista, 7, 8, 8.1, 10
Windows Server® 2008 R2, 2012, 2016

Certifications

Product Support

Frequently Asked Questions

Before You Buy

Note: For more information on how to detect an IDE hard drive, visit http://www.startech.com/faq/hard_drive_accessories_ide_detection.

Older IDE drives are not supported by current StarTech.com products. Typically, these drives were made earlier than the mid-to-late 1990s and are smaller than 1 Gigabyte in size.

There are a number of reasons that older IDE drives may not be detected, including the following:

  • The drive uses PIO (Programmed Input/Output) mode and not DMA (Direct Memory Access).

  • The drive is non-ATA or is using an ATA mode that predates the chipset's compatibility (usually older than ATA-4).

  • The sector size is not 512 bytes.

Unfortunately there is no workaround in these situations. An older system or an older IDE controller card must be used to access older IDE drives.

This device supports the ATA Packet Interface (ATAPI) protocol. ATAPI is required for optical drives, including CD-ROM drives, DVD-ROM drives, and Blu-ray players. Because this device supports ATAPI, optical drives are also supported.