Product ID: S25SLOTR
The S25SLOTR Trayless Hard Drive Rack can be installed into an available (full profile) PCI expansion card slot, providing easy access to a bare 2.5" SATA hard drive or solid state drive (SSD) from the rear panel of a computer case.
Unlike conventional hard drive enclosures, the S25SLOTR hard drive rack doesn't require that a drive be installed in a drive tray, saving the time and hassle involved in having to mount or install the hard drive for access to drive contents.
To maximize performance and utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with a compatible controller.
Once installed in a PCI slot (and accompanying rear panel bracket), installing a 2.5" SATA HDD is as simple as inserting it into the trayless rack. To remove the hard drive, simply hit the eject button to unlock the access door, allowing the drive to be pulled out of the computer without having to dismount the drive.
* This unique design of the mobile rack enables you to use any available full profile expansion slot to mount a removable 2.5in SATA hard drive.
|Warranty Information||Warranty||2 Years|
|Connector(s)||1 - Drive Connectors||SATA Data & Power Combo (7+15 pin)|
|1 - Host Connectors||LP4 (4 pin; Large Drive Power)|
|SATA (7 pin, Data)|
|SATA Power (15 pin)|
|Environmental||Operating Temperature||0°C to 55°C (32°F to 131°F)|
|Storage Temperature||-5°C to 75°C (23°F to 167°F)|
|Hardware||Number of Drives||1|
|Compatible Drive Types||SATA|
|Indicators||1 - LED Indicators||Solid - Power On
Blinking - Activity
|Packaging Information||Package Height||33,0 mm [1,3 in]|
|Package Length||13,6 cm [5,4 in]|
|Shipping (Package) Weight||234,0 g [8,3 oz]|
|Package Width||16,1 cm [6,3 in]|
|Performance||Max Drive Capacity||Tested up to 500 GB|
|Hot Swap Capability||Yes|
|Physical Characteristics||Weight of Product||167,0 g [5,9 oz]|
|Material||Aluminum and Steel|
|Max Drive Height||9,5 mm [0,4 in]|
|Product Length||14,5 cm [5,7 in]|
|Product Width||21,0 mm [0,8 in]|
|Product Height||12,0 cm [4,7 in]|
|Software||OS Compatibility||OS independent; No software or drivers required|
|What's in the Box||1 - Included in Package||Expansion Slot Removable HDD bracket|
|20in SATA cable|
|LP4 SATA breakout cable|
|Hard Drive Protective Film|
Make a right-angled connection to your SATA drive, for installation in tight spaces
Connect and position SATA drives easily - designed for larger cases
Power up to 3 devices using a SATA power connector from the computer power supply
Power up to two 4-pin LP4hard drives or devices, and a floppy drive, from a single SATA power supply connector
Connect two LP4 peripherial devices (CD/DVD-ROM drives etc.) to a single LP4 connector
Power two SATA drives from a single LP4 power supply connector.
Yes, this mobile rack does support hot-swapping of SATA drives. To use this feature, it is required that the SATA port is set to Advanced Host Controller Interface (AHCI) mode and hot-swapping is enabled. On most motherboards, this is performed within the Basic Input/Output System (BIOS) or the Unified Extensible Firmware Interface (UEFI). If you are using a SATA controller card, consult the motherboard manufacturer's technical documentation for the correct steps to accomplish this.